Abstract:Chemical mechanical planarization (CMP) is an integral part in semiconductor processing including the back-end-of-line (BEOL) step. A goal of CMP is to uniformly polish the metal interconnects and the liner/barrier materials while minimizing CMP-related defects such as pitting, dissolution, and galvanic corrosion. A variety of azoles are used as corrosion inhibitors such as benzotriazole (BTA) to prevent corrosion defects during polishing. [1,2] These azoles work together with particles in the slurries to polish the overplated metal forming the interconnects. However, azoles are very poorly biodegradable during wastewater treatment and highly toxic to the nitrification process, which requires expensive wastewater treatment challenges. [3,4] Also, it is known that the use of BTA leads to contamination of Cu films by forming undesirable hydrophobic organic residues (e.g., BTA and Cu-BTA complexes), [5] making their removal very difficult during cleaning. To address these challenges aliphatic amino acids were examined as potential corrosion inhibitors to replace problematic azoles in CMP slurries. Three amino acids were considered in a model CMP slurry. These three were chosen for their unique functional groups: methionine, containing a sulfur group, glutamic acid, having an extra carboxylic acid group, and leucine, having a branched hydrocarbon chain. A representative polishing slurry with 35 nm colloidal silica abrasives, 1 wt% hydrogen peroxide as an oxidizer, 0.5wt% arginine as a complexing agent, at pH 8 was used. Three experimental aims were considered (1) corrosion characterization of the three amino acid and BTA electrolytes with linear sweep voltammetry; (2) comparison of the Co and Cu metal removal rate (MRR) in polishing experiments with a proto-type CMP polisher with 8” wafers, and (3) oxidation of the amino acids and BTA in a Fenton assisted electrooxidation reaction. Methionine was most effective in controlling the galvanic corrosion of the Cu-Co couple. The Co and Cu MRR decreased in the presence of three amino acids and showed comparable removal selectivity. The forced degradation of the amino acids under the Fenton-assisted electrooxidation confirmed that they were more readily degraded compared to BTA. Acknowledgments : This work was supported by the Semiconductor Research Corporation grant (Task 3100.001) under the Global Research Collaboration program. References Seo, J., A review on chemical and mechanical phenomena at the wafer interface during chemical mechanical planarization. Journal of Materials Research 2021, 1-23. C. Peethala, H. P. Amanapu, U. Lagudu, and S.V. Babu, J. Electrochem. Soc, 159(6), H582-H588, 2012. D.E. Speed, Chapter 11, Advances in chemical mechanical planarization (CMP) 2nd edition, Babu, S. V., Ed. 2021. G. Li et al. / Chemosphere 241 (2020) 1249932. Seo, J.; Vegi, S. S. R. K. H.; Babu, S.V. ECS Journal of Solid State Science and Technology 2019, 8 (8), P379–P387.

The Role of Diethanolamine on Chemical Mechanical Polishing in Alkaline Glycine-Based Slurries for Cobalt Interconnects

Research on Weakly Alkaline Bulk Slurries Relevant to Chemical Mechanical Polishing for Cobalt Interconnects

Roles of Phthalic Acid and Oleic Acid on Chemical Mechanical Polishing in Alkaline Slurries for Cobalt Interconnects

Electrochemical Corrosion Behavior and Theoretical Simulation of Cobalt in Chemical Mechanical Polishing Process

The Role of Dipotassium Ethylenediaminetetraacetic Acid and Potassium Oleate on Chemical Mechanical Planarization Relevant to Heterogeneous Materials of Cobalt Interconnects

Evaluation and Mechanism Study of a Novel Green Chemical Mechanical Polishing Slurry for Cobalt Interconnects

Slurry System Establishment and Optimization for Advanced Cobalt Interconnect Metallization

Barrier And Low K Polish With A Novel Alkaline Barrier Slurry Combining With Fa/O Chelating Agent

Polishing mechanisms of various surfactants in chemical mechanical polishing relevant to cobalt interconnects

Synergetic effect of H 2 O 2 and glycine on cobalt CMP in weakly alkaline slurry

Study on Effective Methods and Mechanism of Inhibiting Cobalt Removal Rate in Chemical Mechanical Polishing of GLSI Low-Tech Node Copper Film

Effect of Ph Value and Glycine in Alkaline CMP Slurry on the Corrosion of Aluminum by Electrochemical Analysis

Environmentally Friendly Amino Acid-Based Polishing Slurry with Reduced Galvanic Corrosion at Copper/Cobalt Interface for Advanced Cu Interconnect Applications

The Role of EDTA-2K in the Chemical Mechanical Polishing of Aluminum

Effect of Cystine in Alkaline CMP Slurry on Controlling the Galvanic Corrosion at Al-Co Interface

The effect of glycine and benzotriazole on corrosion and polishing properties of cobalt in acid slurry

Electrolyte Component Preference and Surface Integrity Impact Analysis for Electrolytic Plasma Polishing of Cobalt-Chromium-molybdenum Alloys

Unraveling the Surface Behavior of Amino Acids on Cu Wiring in Chemical Mechanical Polishing of Barrier Layers: A Combination of Experiments and ReaxFF MD

The Role of Carboxylic Acids on Nanoparticle Removal in Post CMP Cleaning Process for Cobalt Interconnects

Experimental and Computational Investigation of Complexing Agents on Copper Dissolution for Chemical Mechanical Polishing Process

Chemical Interactions and Mechanisms of Different Ph Regulators on Copper and Cobalt Removal Rate of Copper Film CMP for GLSI