Abstract:Hydrogen represents a promising renewable fuel, and its broad application can lead to drastic reductions in greenhouse gas emissions. Keeping hydrogen in liquid form helps achieve high energy density, but also requires cryogenic conditions for storage as hydrogen evaporates at temperatures of about 20 K, which can lead to a large pressure build-up in the tank. This paper addresses the unsteady thermal modeling of cryogenic tanks with liquid hydrogen. Considering the liquid and vapor phases in the tank as two nodes with averaged properties, a lumped-element method of low computational cost is developed and used for simulating two regimes: self-pressurization (also known as autogenous pressurization, or pressure build-up in the closed tank due to external heat leaks) and constant-pressure venting (when some hydrogen is let out of the tank to maintain pressure at a fixed level). The model compares favorably (within several percent for pressure) to experimental observations for autogenous pressurization in a NASA liquid hydrogen tank. The two processes of interest in this study are numerically investigated in tanks of similar shapes but different sizes ranging from about 2 to 1200 m3. Pressure and temperature growth rates are characterized in closed tanks, where the interfacial mass transfer manifests initial condensation followed by more pronounced evaporation. In tanks where pressure is kept fixed by venting some hydrogen from the vapor domain of the tank, the initial venting rate significantly exceeds evaporation rate, but after a settling period, magnitudes of both rates approach each other and continue evolving at a slower pace. The largest tank demonstrates a six-times-lower pressure rise than the smallest tank over a 100 h period. The relative boil-off losses in continuously vented tanks are found to be approximately proportional to the inverse of the tank diameter, thus generally following simple Galilean scaling with a few percent deviation due to scale effects. The model developed in this work is flexible for analyzing a variety of processes in liquid hydrogen storage systems, raising efficiencies, which is critically important for a future economy based on renewable energy.

Reducing the hydrogen content in liquid helium

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

Research on Improving the System Sensitivity for Hot Helium Leak Test

Methods to simplify cooling of liquid Helium cryostats

Theoretical Helium Liquefaction Rate Based on the Temperature-Distributed Refrigeration Method in Regenerative Refrigerators

Cooling Behaviors of Liquid Hydrogen by Helium Gas Injection

Purification of helium gas for the helium test loop

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

Temperature lowering of liquid nitrogen via injection of helium gas bubbles improves the generation of parahydrogen‐enriched gas

A Critical Review of Liquid Helium Temperature High Frequency Pulse Tube Cryocoolers for Space Applications

Varying the Cross-Sectional Area of the Regenerator for Improving the Refrigeration Efficiency at Liquid-Helium Temperatures

Factors Influencing the Lowest Refrigerating Temperature of the Miniature Co-Axial Pulse Tube Refrigerator

Strategies to recover and minimize boil-off losses during liquid hydrogen storage

Dilution refrigerator and its heat transfer problems

Conservation of Helium while Maintaining High System Purity

A hermetic on-cryostat helium source for low temperature experiments

IMPROVING THE ACCURACY OF CALCULATING THE SUPER-COMPRESSIBILITY COEFFICIENT OF HELIUM BASED ON STATE EQUATIONS

Optical measurements of solid nitrogen solubility in hydrogen at cryogenic temperatures

Numerical Study of Condensation Heat Transfer Performance and Liquid Film Distribution Characteristics in Small-Scale Helium Liquefiers

The Effect of Liquid Hydrogen Tank Size on Self-Pressurization and Constant-Pressure Venting