Abstract:Long-term corrosion of glass is studied using polarising light microscopy, FTIR and SEM including EDX and elemental mapping. Early 19th century beads made of lead-potassium glass are the object of the study. Non-uniformly distributed internal stresses were introduced into the studied glass during bead manufacturing. Corrosion of 19th century bead glass has been shown to comprise several mutually connected processes developing in parallel and intensifying one another. These processes are the depolymerization of glass, the directed migration of alkali-metal impurities and local glass leaching, and the nucleation of micro discontinuities followed by the formation of micro cracks and their gradual growth. In course of time, their cumulative and apparently synergistic effect results in glass fracturing terminated with bead crumbling into tiny discoloured particles. All these phenomena are controlled by the internal stress originated from the bead production process. Thus, the phenomenon of stressed bead glass corrosion is the process of the internal stress relaxation in glass through the nucleation and growth of cracks, which lasts for many decades at room temperature. It is dramatically accelerated when beads are heat treated. Annealing at 300°C for 15 min. is sufficient for artificial ageing of initially intact beads. The corrosion has been observed to occur in glass even if beads are kept in well-controlled museum environment. The local thermal-fluctuation mechanism is proposed to account for the corrosion phenomenon on an atomic scale. The approach based on the thermal-fluctuation mechanism is applicable to describe degradation and destruction processes in various solid substances and composite materials under stress; this approach enables understanding the phenomena of formation and degradation of nanostructures, e. g., heterostructures with quantum wells or quantum dots.

Non-destructive 3D exploration of silicate glass corrosion: a combined multiscale approach from the macro to the nanoscale

Laboratory and synchrotron x‐ray micro–computed tomography to shed light on degradation features of corroded Roman glass

Alteration of a Submarine Basaltic Glass under Environmental Conditions Conducive for Microorganisms: Growth Patterns of the Microbial Community and Mechanism of Palagonite Formation

Developing a quantitative multimodal and multi-scale, fully non-destructive technique for the study of iron archaeological artefacts

Formation and evolution of secondary phases and surface altered layers during borosilicate glass corrosion in pore water

Advanced mapping of inorganic treatments on porous carbonate stones by combined synchrotron radiation high lateral μXRPD and μXRF

Intermittent in-situ high-resolution X-ray microscopy of 400-nm porous glass under uniaxial compression: study of pore changes and crack formation

New Insights into the Assessment of Archaeological Crystalline Structures

An innovative methodology for the non-destructive diagnosis of architectural elements of ancient historical buildings

Visualizing time-dependent microstructural and chemical evolution during molten salt corrosion of Ni-20Cr model alloy using correlative quasi in situ TEM and in situ synchrotron X-ray nano-tomography

Thermal-fluctuation mechanism of long-term corrosion of glass caused by internal stress: processes of depolymerization, impurity migration and fracturing on an atomic scale

Potash-lime-silica glass: protection from weathering

Synchrotron radiation X-ray diffraction computed tomography (XRDCT): a new tool in cultural heritage and stone conservation for 3D non-destructive probing and phase analysis of inorganic re-treatments

Synchrotron Micro-X-ray Diffraction in Transmission Geometry: A New Approach to Study Polychrome Stratigraphies in Cultural Heritage

Study of corrosion in archaeological gilded irons by Raman imaging and a coupled scanning electron microscope-Raman system

Corrosion of ternary borosilicate glass in acidic solution studied in operando by fluid-cell Raman spectroscopy

Scanning Electrochemical Cell Microscopy: A Powerful Method to Study the Intergranular Corrosions of Archaeological Silver Artifacts

Element-Resolved Corrosion Analysis of Stainless-Type Glass-Forming Steels

Glass artefacts conservation: finding materials and methods for glass vessels' reconstruction

The X-ray diffraction beamline MCX at Elettra: a case study of non-destructive analysis on stained glass

Improved chemometric approach for XRF data treatment: application to the reverse glass paintings from the Lipari collection