Numerical Study of SiC MOSFET With Integrated n-/n-Type Poly-Si/SiC Heterojunction Freewheeling Diode

Hengyu Yu,Shiwei Liang,Hangzhi Liu,Jun Wang,Z. John Shen
DOI: https://doi.org/10.1109/ted.2021.3097979
IF: 3.1
2021-09-01
IEEE Transactions on Electron Devices
Abstract:It is highly desirable to monolithically integrate a high-performance freewheeling diode (FWD) in both Si and SiC power MOSFETs for power electronic applications. This is especially true for a SiC MOSFET since its inherent body diode has a very large turn-on knee voltage (~2.7 V). The purpose of this numerical study is to investigate a new 1200 V SiC MOSFET structure with an integrated heterojunction diode formed between n-type polysilicon and n-type SiC (termed HJD-MOSFET). The proposed HJD-MOSFET uses a mesa structure to accommodate the heterojunction FWD without sacrificing any active area while leaving the split-gate planar MOSFET cells in the trench. A p-shield region surrounding the heterojunction, along with the p-base of the MOS cells, shields high electric fields and maintains a high breakdown voltage. Three key HJD-MOSFET device parameters are identified and optimized in this article. The HJD-MOSFET offers a turn-on knee voltage of 0.5 V, roughly five times lower than the intrinsic SiC body diode or two times lower than a typical SiC Schottky barrier diode due to the low barrier height of the n/n heterojunction (~0.68 eV). Finally, the gate charge of HJD-MOSFET is reduced by 42% compared with conventional MOSFET since the poly-Si gate electrode is significantly reduced to accommodate the heterojunction FWD.
engineering, electrical & electronic,physics, applied
What problem does this paper attempt to address?