Abstract:Determining adhesive failure in adhesively bonded joints is still challenging in the field. While the three-point bending test (3PBT) (ISO 14679:1997) has been helpful in identifying critical forces and displacements related to bond strength, it only allows for a qualitative assessment of the bond line. Recently, a new quantitative methodology has been developed to determine critical stress and fracture toughness using the coupled stress–energy criterion and the 3PBT. However, these assessments require a significant effort using semi-analytical or finite element (FE) analysis. Therefore, the present study proposes a reliable set of analytical equations to determine peel and shear stress distributions using a weak interface formulation and 1D Euler–Bernoulli approach. More precisely, a particular numerical method computes the integration constants from these equations. A new method has been proposed for calculating the interfacial stiffness in peel and shear mode, based on the material and geometrical parameters of the geometry. This method differs from the previous approach, where the interfacial stiffness was calibrated from the experimental behavior of the test. The whole approach has been validated through experimental and numerical analysis, including the costly 3D FE analysis. An analytical expression for interfacial energy release is suggested, developed following the works of Fraisse and Schmit on J -integral assessment of sandwich-type overlaps and depending on the applied force and a rotation, which could be experimentally measured. Therefore, this work is significant progress in determining bond strength using a simple mechanical test and equations applicable to various industries.

Analysis of energy release rate and bending-to-stretching behavior in the shaft-loaded blister test

Numerical simulation of influence factors of stress distribution of weld-bonded joint under peeling load

A Refined Theory for Characterizing Adhesion of Elastic Coatings on Rigid Substrates Based on Pressurized Blister Test Methods: Closed-Form Solution and Energy Release Rate

An Analysis of Photopolymerization Kinetics and Stress Development in Multifunctional Acrylate Coatings

Improved Synchronous Characterization Theory for Surface and Interface Mechanical Properties of Thin-Film/Substrate Systems: A Theoretical Study on Shaft-Loaded Blister Test Technique

Theoretical Study on Synchronous Characterization of Surface and Interfacial Mechanical Properties of Thin-Film/Substrate Systems with Residual Stress Based on Pressure Blister Test Technique

A novel cylindrical punch method to characterize interfacial adhesion and residual stress of a thin polymer film

Measurements of Interface Fracture Strength between Fiber-Reinforced Composite Laminates and Thin Surface Films Using the Blister Test

Mechanics of Microblister Tests in 2D Materials Accounting for Frictional Slippage

Protocol to perform pressurized blister tests on thin elastic films

A method for predicting critical load evaluating adhesion of coatings in scratch testing

A Systematic Method for Characterizing the Elastic Properties and Adhesion of a Thin Polymer Membrane

Current status of blister tests for adhesion of thin films to substrate

Analytical solution for the interfacial stress and energy release rate at failure initiation of the three-point bending test (ISO 14679:1997)

Numerical Analysis on the Wrinkling Instability of a Stiff Film Adhering to an Elastic Substrate with a Graded Coating

Experimental approach for measuring the peeling strength of a sheet bonded on a curved adherend with pressure sensitive adhesive and predicting the peeling resistance by finite element analysis

Thermally Assisted Peeling of an Elastic Strip in Adhesion with a Substrate Via Molecular Bonds

Influence of Loading Rate on the Cohesive Traction for Soft, Rubber-like Adhesive Layers Loaded in Modes I and III

A four-point bending technique for characterizing the interface fracture toughness between soft thin films and stiff substrates

Fatigue-Resistant Adhesion Through High Energy Barriers

Elastic Stress Analysis of Single-Lap Adhesive-Bonded Joints