Abstract:The paper describes an investigation of Al2O3 samples and NiAl–Al2O3 composites consolidated by pulse plasma sintering (PPS). In the experiment, several methods were used to determine the properties and microstructure of the raw Al2O3 powder, NiAl–Al2O3 powder after mechanical alloying, and samples obtained via the PPS. The microstructural investigation of the alumina and composite properties involves scanning electron microscopy (SEM) analysis and X-ray diffraction (XRD). The relative densities were investigated with helium pycnometer and Archimedes method measurements. Microhardness analysis with fracture toughness (KIC) measures was applied to estimate the mechanical properties of the investigated materials. Using the PPS technique allows the production of bulk Al2O3 samples and intermetallic ceramic composites from the NiAl–Al2O3 system. To produce by PPS method the NiAl–Al2O3 bulk materials initially, the composite powder NiAl–Al2O3 was obtained by mechanical alloying. As initial powders, Ni, Al, and Al2O3 were used. After the PPS process, the final composite materials consist of two phases: Al2O3 located within the NiAl matrix. The intermetallic ceramic composites have relative densities: for composites with 10 wt.% Al2O3 97.9% and samples containing 20 wt.% Al2O3 close to 100%. The hardness of both composites is equal to 5.8 GPa. Moreover, after PPS consolidation, NiAl–Al2O3 composites were characterized by high plasticity. The presented results are promising for the subsequent study of consolidation composite NiAl–Al2O3 powder with various initial contributions of ceramics (Al2O3) and a mixture of intermetallic–ceramic composite powders with the addition of ceramics to fabricate composites with complex microstructures and properties. In composites with complex microstructures that belong to the new class of composites, in particular, the synergistic effect of various mechanisms of improving the fracture toughness will be operated.

Fabrication and Characterization of Al2O3-WxSiy-WwBz Composite Prepared by Spark Plasma Sintering Method in Al-Si-WO3-B2O3 System

Fabrication and Characteristics of in Situ Al12w Particles Reinforced Aluminum Matrix Composites by Reaction Sintering

Synthesis of Al2O3-WSi2-WB2-WB composite in Al-Si-WO3-B2O3 system by self-propagating high-temperature synthesis

Fabrication and Mechanical Properties of Wc-Co-Al2o3 Nanocomposites by Spark Plasma Sintering

Microstructure and Properties of W/Sm2O3 Composites Prepared Spark Plasma Sintering

Spark Plasma Sintering and Mechanical Properties of ZrO2(Y2O3)–Al2O3 Composites

Fabrication and Mechanical Properties of Al<sub>2</sub>O<sub>3</sub>-Ti<sub>3</sub>SiC<sub>2</sub> Composites by SPS

Fabrication And Mechanical Properties Of Al2o3-Ti3sic2 Composites By Sps

Microstructure and mechanical properties comparison between spark plasma sintered and microwave sintered Al-(SiC + B 4 C) composite

In Situ Al Based Composites Fabricated in Al-SiO2-C System by Reaction Sintering

Preparation and Characterization of Aluminum Matrix Composites Based on Al–WO3 System

Fabrication and Properties of SiO2-BN-Si3N4 Composites

In Situ Porous Alumina/aluminum Titanate Ceramic Composite Prepared by Spark Plasma Sintering from Nanostructured Powders

Spark plasma sintering and mechanical properties of Al_2O_3-ZrO_2 nanocomposites

Spark Plasma Sintering of Al<sub>2</sub> O<sub>3</sub> Particulate Dispersed Zr<sub>55</sub> Cu<sub>30</sub> Al<sub>10</sub> Ni<sub>5</sub> Metallic Glassy Matrix Composite

Characterization of Al2O3 Samples and NiAl–Al2O3 Composite Consolidated by Pulse Plasma Sintering

In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites

Effect of A12O3 on the mechanical properties and microstructure of Ti3SiC2/Al2O3 composite

Preparation and Characterization of Al-Mg-Si Matrix Composites Reinforced with Ti2(Al,Si)C Solid Solution

ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders

In Situ Alumina/Aluminum Titanate Bulk Ceramic Composites Prepared by Sps from Different Structured Composite Powders