Abstract:Fault dynamometer cards are the basis of the diagnosis technique for sucker rod pumping systems. Predicting fault cards with a pumping condition model is an economical and effective method. The usual model is described by a mixed function of the pump displacement and pump load, and it is difficult to use in the prediction method based on the analytical solution of the sucker rod string wave equation. In this paper, a normal pumping condition model described by a function of polished rod velocity is proposed. For the analytical solution of the sucker rod wave equation, an iterative prediction algorithm with pumping condition models is proposed, its convergence is analyzed, and then it is validated by classical finite difference method simulated cards and measured surface dynamometer cards. The results show that the proposed algorithm is accurate. The algorithm has a maximum relative error of 0.10% for the classical method simulated card area and 1.45% for the measured card area. The research of this paper provides an effective scheme for the design, prediction, and fault diagnosis of a sucker rod pumping system with an analytical solution.

What problem does this paper attempt to address?

The main problem this paper attempts to address is improving the prediction accuracy and fault diagnosis technology of the sucker rod pump system. Specifically, the authors propose a new method based on polished rod velocity to predict the behavior of the sucker rod pump system, overcoming the limitations of traditional methods that rely on mixed function models based on pump displacement and pump load. Traditional methods find it difficult to use analytical solutions when solving the sucker rod wave equation, while the new method establishes a normal operating condition model based on polished rod velocity and combines it with an iterative prediction algorithm to more accurately predict the behavior of the sucker rod pump system. ### Main Research Content Includes: 1. **Problem Description**: - Monitoring the working state of the sucker rod pump system is very important, but due to its complex working environment, direct monitoring is difficult. - Usually, the working state of the pump is identified by analyzing the surface dynamometer card, but it is impossible to obtain all types of fault dynamometer cards in actual oil wells. - Simulation technology is an economical and effective method to obtain dynamometer cards, but traditional models have limitations when solving the sucker rod wave equation. 2. **Proposed New Method**: - A normal operating condition model based on polished rod velocity was established. - An iterative prediction algorithm was proposed, which uses the analytical solution of the sucker rod wave equation to predict the behavior of the pump. - The convergence of the algorithm was analyzed, and the accuracy of the algorithm was verified through dynamometer cards simulated by the classical finite difference method and measured surface dynamometer cards. 3. **Verification and Discussion**: - The effectiveness of the new method was verified by comparing it with the simulation results of the classical finite difference method. - Experimental results show that the new method has high accuracy at low pumping speeds (1.4 min⁻¹), with a relative area error of only 0.02%. - At high pumping speeds (5.0 min⁻¹), after multiple iterations, the prediction results of the new method are consistent with the finite difference method, with relative area errors of -0.10% and 0.01%, respectively. - The practicality of the new method was further verified by comparing it with the actual measured dynamometer cards, with a relative area error of 1.30%. ### Conclusion: This study provides an effective method for the design, prediction, and fault diagnosis of sucker rod pump systems, especially based on analytical solutions. The new method not only improves prediction accuracy but also simplifies the complexity of the model, providing new ideas for practical applications.

A Novel Method for Predicting the Behavior of a Sucker Rod Pumping Unit Based on the Polished Rod Velocity

Ultra-clean Bellows Pump Flowrate Prediction Based on Multi-sensor Information Fusion with Noncontact Magnetic Tagged Bellow Deformation Derivation

Probabilistic Modeling and Prediction of Dynamic Discharge Process in Multiphase Pumps

A Fault Detection Method for a Practical Electro-Hydraulic Variable-Displacement Pump with Unknown Swashplate Moment.

Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Fault Diagnosis for Sucker Rod Pumping Systems: A Parallel System Approach

Adaptive fault diagnosis of sucker rod pump systems based on optimal perceptron and simulation data

Hybrid model for discharge flow rate prediction of reciprocating multiphase pumps.

Unsupervised Fault Diagnosis of Sucker Rod Pump Using Domain Adaptation with Generated Motor Power Curves

The Loose Slipper Fault Diagnosis of Variable-displacement Pumps under Time-varying Operating Conditions

A Working Conditions Warning Method for Sucker Rod Wells Based on Temporal Sequence Prediction

Multistage hybrid model for performance prediction of centrifugal pump

A fault prognosis strategy for an external gear pump using Machine Learning algorithms and synthetic data generation methods

Validation of the cytochemical section bioassay for thyroid stimulating antibodies.

Whole flow field performance prediction by impeller parameters of centrifugal pumps using support vector regression

Development of a Hybrid AI Model for Fault Prediction in Rod Pumping System for Petroleum Well Production

A Novel Intelligent Fault Diagnosis Method for Self-Priming Centrifugal Pumps

Cyclostationary Approach to Detect Flow-Induced Effects on Vibration Signals from Centrifugal Pumps

New Method to Determine the Dynamic Fluid Flow Rate at the Gear Pump Outlet

Theoretical Prediction Model of Transient Performance for a Mixed Flow Pump under Fast Start-Up Conditions