Abstract:A ferroelectric polyvinylidene fluoride (PVDF)‐based composite film (PVDF‐MXene) with high β‐phase content is prepared as the protective layer on zinc metal by the 3D printing method. Such a protective layer can manipulate the concentration distribution of zinc ions and enable the uniform zinc growth, which effectively enhances the performance of zinc batteries. Zinc (Zn) metal anodes of aqueous zinc‐ion batteries (AZIBs) have attracted significant attention due to their high theoretical capacities, low redox potentials, and low cost. However, uncontrollable dendrite formation and side reactions can result in limited reversible cycling and quick failure of the batteries. Herein, a polyvinylidene fluoride (PVDF)‐based protection layer (PVDF‐MXene) with high β‐phase content is built by the 3D printing method. The synergistic effect attributed to the 3D printing approach and MXene nanosheets contributes to phase transition of the PVDF polymer chains from α‐phase to β‐phase, improving the ferroelectric properties of the printed PVDF films. Such a protection layer can manipulate the concentration distribution of zinc ions and enable the uniform growth of zinc plates. As a result, symmetrical zinc batteries using such anodes (PVDF‐MXene‐Zn) exhibit reversible Zn plating/stripping with low voltage hysteresis at 1.0 mA cm−2, 1.0 mAh cm−2 for over 4200 h, and a high‐rate capability up to 10 mA cm−2. When assembled with MnO2 and activated carbon, the resulting Zn‐MnO2 battery and zinc‐ion capacitor exhibited significantly enhanced cycling stability. The proposed strategy in this study provides a novel strategy for the protection of the zinc anode, thus promoting the practical application of ZIBs.

3D Cold‐Trap Environment Printing for Long‐Cycle Aqueous Zn‐Ion Batteries (Adv. Mater. 9/2023)

3D Cold‐Trap Environment Printing for Long‐Cycle Aqueous Zn‐Ion Batteries

3D Printing of MXene‐Enhanced Ferroelectric Polymer for Ultrastable Zinc Anodes

MICROFLUIDIC‐assisted 3d Printing Zinc Powder Anode with 2d Conductive MOF/MXene Heterostructures for High‐stable Zinc‐organic Battery

3D‐Printed Multi‐Channel Metal Lattices Enabling Localized Electric‐Field Redistribution for Dendrite‐Free Aqueous Zn Ion Batteries

Establishing Thermal Infusion Method for Stable Zinc Metal Anodes in Aqueous Zinc‐Ion Batteries

High Zinc Utilization Aqueous Zinc Ion Batteries Enabled by 3D Printed Graphene Arrays

In‐situ Implanting 3D Carbon Network Reinforced Zinc Composite by Powder Metallurgy for Highly Reversible Zn‐based Battery Anodes

Additive Manufacturing of Grid Reservoir‐Integrated Anodes for Dendrite‐Free, Safe, and Ultra‐Low Voltage Zinc‐Ion Batteries

3D-printed flexible anode for high-performance zinc ion battery

A Liquid Metal Microdroplets Initialized Biopolymer Composite for 3D Printing Anode Host in Zn‐ion Battery

3D Porous Copper Skeleton Supported Zinc Anode toward High Capacity and Long Cycle Life Zinc Ion Batteries

3D Printing of Electron/Ion-Flux Dual-Gradient Anodes for Dendrite-Free Zinc Batteries

A Liquid Metal Microdroplets Initialized Hemicellulose Composite for 3D Printing Anode Host in Zn‐Ion Battery

Multifunctional anchoring effect enables ultra-stable 3D-printed zinc powder-based anode

Synergistic Effect of 3D Elastomer/Super‐Ionic Conductor Hybrid Fiber Networks Enables Zinc Anode Protection for Aqueous Zinc‐Ion Batteries

3D Printing‐Induced Phase Transition in Ferroelectric Porous Polymer Coatings for Stable Zinc Anodes

Ultra‐Stable 3D‐Printed Zn Powder‐Based Anode Coated with a Conformal Ion‐Conductive Layer

Spatially Restricted Deposition of Zn Metal in Localized-Activation 3D Electrode Enables Long-Term Stable Zinc Ion Batteries

Encapsulation of Metallic Zn in a Hybrid MXene/Graphene Aerogel as a Stable Zn Anode for Foldable Zn‐Ion Batteries

Ultrathin zinc-carbon composite anode enabled with unique three-dimensional interpenetrating structure for high-performance aqueous zinc ion batteries