Abstract:Increasing working voltage is a promising way to increase the energy density of lithium-ion batteries. Cycling and rate performance deteriorated due to excessive electrolyte decomposition and uncontrolled formation of a cathode–electrolyte interface (CEI) layer at a high voltage. A new concept is proposed to construct a high-voltage-stable electrode–electrolyte interface. An elastomeric poly(dimethyl siloxane) (PDMS) binder is incorporated into the electrode to modify the LiNi0.5Co0.2Mn0.3O2 (NCM 523) particle surface via an in situ cross-linking reaction between hydroxy-terminated PDMS and methyl trimethoxy silane promoted by moisture at ambient conditions (MPDMS). Improved electrochemical performance is achieved with the MPDMS binder in terms of reversible capacity (201 vs 185 mAh·g–1 at 0.2C), capacity retention (80 vs 68%, after 300 cycles at 1C), and rate performance (55.6% increase at 5C), as demonstrated by the NCM 523||Li half-cell. The NCM 523||graphite full-cell also shows improved performance at 4.6 V (147 vs 128 mAh·g–1, 82 vs 76%, after 200 cycles at 1C). The mechanism studies indicate that MPDMS exerts multiple effects, including cathode surface passivation, solvation structure tuning, electrolyte uptake enhancement, and mechanical stress relief. This work provides an inspiring route to realize high-voltage application of lithium-ion battery technology.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01245.Viscosity changes of NCM-PVDF and NCM-MPDMS/PVDF electrode slurries at different shear rates; cross-sectional SEM images of NCM-PVDF and NCM-MPDMS/PVDF electrode applied with ion polishing after 100 cycles; discharge specific capacity of the NCM-PVDF and NCM-MPDMS/PVDF electrodes at different voltages with different current densities; cycling and rate performance of the NCM-PVDF and NCM-MDMS/PVDF electrodes between 2.8 and 4.3 V; SEM images of NCM-PVDF and NCM-MPDMS/PVDF electrodes before cycling; cross-section SEM images of the NCM-PVDF and NCM-MPDMS/PVDF electrodes after 100 cycles via ion polishing treatment; TEM images of NCM 523 pristine particles, NCM-MPDMS/PVDF, and NCM-PVDF electrodes before cycling; EDS images of NCM-PVDF NCM-MPDMS/PVDF electrodes before and after 100 cycles; the electrochemical impedance (EIS) profiles of the cells measured at different cycles and canning voltammetry curves at different sweep rates between 2.8 and 4.6 V for NCM-PVDF and NCM-MPDMS/PVDF electrodes; C 1s spectrum of the NCM-PVDF and NCM-MPDMS/PVDF electrodes before and after 100 cycles; Ni 2p XPS spectra of the NCM-PVDF and NCM-MPDMS/PVDF electrodes after 100 cycles; active adsorption sites of lithium ions in PDMS, PVDF, EC, and DMC and their corresponding adsorption energies (PDF)This article has not yet been cited by other publications.

Solvent-free NMC electrodes for Li-ion batteries: unravelling the microstructure and formation of the PTFE nano-fibril network

Solvent-free NMC electrodes for Li-ion batteries: unravelling the microstructure and formation of the PTFE nano-fibril network

Impact of binder content on particle fracture and microstructure of solvent-free electrodes for Li-ion batteries

Revisiting Polytetrafluorethylene Binder for Solvent-Free Lithium-Ion Battery Anode Fabrication

Facile Fabrication of Binder-free Metallic Tin Nanoparticle/Carbon Nanofiber Hybrid Electrodes for Lithium-ion Batteries

Enhanced Cycling Performance of Ni-Rich Positive Electrodes (NMC) in Li-Ion Batteries by Reducing Electrolyte Free-Solvent Activity

Solvent-free Lithium Iron Phosphate Cathode Fabrication with Fibrillation of Polytetrafluoroethylene

A Solvent-Free Process Enabled by Polytetrafluoroethlyene/Carbon Black Composites for Fabricating Electrodes for Lithium-Ion Batteries with a High Volumetric Energy

Rheological Studies of LiNi0.6Mn0.2Co0.2O2-Based Slurry for the Development of Energy Dense Li-Ion Applications

The Impact of PTFE:PVDF Ratio on the Fabrication of Free-Standing Electrodes for Solvent-Free Dry Electrodes in Libs

Investigating the Structure and Performance of Electrodes Made by Dry and Wet Slurry Processes

(Invited) Advanced Fluoropolymer Binder for Solvent-Free Manufacturing of Lithium-Ion Battery Electrodes

Probing Charge Transport and Microstructural Attributes in Solvent‐ versus Water‐Based Electrodes with a Spotlight on Li–S Battery Cathode

Investigating the Structure and Performance Differences between the Electrodes Made by a Dry and a Wet Slurry Processes

Graphite//LiNi0.5 Mn1.5 O4 Cells Based on Environmentally Friendly Made-in-Water Electrodes

Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication

Optimized NMC622 electrodes with a high content of the active material: A comprehensive study

Effect of Conductive Carbon Morphology on the Cycling Performance of Dry-Processed Cathode with High Mass Loading for Lithium-Ion Batteries

The Influence of Polyvinylidene Fluoride (PVDF) Binder Properties on LiNi0.33Co0.33Mn0.33O2 (NMC) Electrodes Made by a Dry-Powder-Coating Process

Wet-slurry fabrication using PVdF-HFP binder with sulfide electrolytes via synergetic cosolvent approach for all-solid-state batteries

One Stone for Multiple Birds: A Versatile Cross-Linked Poly(dimethyl siloxane) Binder Boosts Cycling Life and Rate Capability of an NCM 523 Cathode at 4.6 V