Abstract:Coupling effects of various loading conditions can cause deflections, settlements and even failure of in-service bridges. Although it is one of the most critical loads, unfortunately, loading conditions of moving vehicles are difficult to capture in real time by bridge monitoring systems currently in place for sustainable operation. To fully understand the status of a bridge, it is essential to obtain instantaneous vehicle load distributions in a dynamic traffic environment. Although there are some methods that can identify overweight vehicles, the captured vehicle-related information is scattered and incomplete and thus cannot support effective bridge structural health monitoring (BSHM). This study proposes a noncontact, vision-based approach to identification of vehicle loads for real-time monitoring of bridge structural health. The proposed method consists of four major steps: (1) establish a dual-object detection model for vehicles using YOLOv7, (2) develop a hybrid coordinate transformation model on a bridge desk, (3) develop a multiobject tracking model for real-time trajectory monitoring of moving vehicles, and (4) establish a decision-level fusion model for fusing data on vehicle loads and positions. The proposed method effectively visualizes the 3D spatiotemporal vehicular-load distribution with low delay at a speed of over 30FPS. The results show that the hybrid coordinate transformation ensures that the vehicle position error is within 1 m, a 5-fold reduction compared with the traditional method. Wheelbase is calculated through dual-object detection and transformation and is as the primary reference for vehicle position correction. The trajectory and real-time speed of vehicles are preserved, and the smoothed speed error is under 5.7%, compared with the speed measured by sensors. The authors envision that the proposed method could constitute a new approach for conducting real-time SHM of in-service bridges.

Evaluation of vehicular contact force on bridge joints by vibration responses and object detection

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

Response and Vibration Control of Steel Box-girder Bridge When Vehicles Passing through the Expansion Joint

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

Static and dynamic vehicle load identification with lane detection from measured bridge acceleration and inclination responses

Evaluation of the Dynamic Impact of a Passing Vehicle on a Bridge Deck Due to a Damaged Expansion Joint

Estimating Bridge Natural Frequencies Based on Modal Analysis of Vehicle–Bridge Synchronized Vibration Data

Single-Camera-Based Bridge Structural Displacement Measurement with Traffic Counting

Damage Detection in Bridge Structure Using Vibration Data under Random Travelling Vehicle Loads

A bridge dynamic response analysis and load recognition method using traffic imaging

An analysis method of vehicle–bridge coupling vibration considering effects of expansion joint parameters and its application

Mode Shape Identification and Damage Detection of Bridge by Movable Sensory System

Monitoring bearing damage in bridges using accelerations from a fleet of vehicles, without prior bridge or vehicle information

Wireless vibration testing and bridge deck damage identification using underneath maintenance walkway

Computer Vision-Based Real-Time Identification of Vehicle Loads for Structural Health Monitoring of Bridges

Expansion Joints Risk Prediction System Based on IoT Displacement Device

Dynamic Response of a Vehicle-Bridge Expansion Joint Coupled System

An image-based bridge displacement field measurement method with self-vibration elimination

Bayesian Vehicle Load Estimation, Vehicle Position Tracking, and Structural Identification for Bridges with Strain Measurement

Bridge health monitoring system based on vibration measurements