Abstract:In this study, Na as the n‐type dopant is introduced in the polycrystalline Bi2Te3 material for enhancing the thermoelectric and mechanical properties. Benefitting from the synergistic optimization of electrical and thermal transport properties, a maximum ZT value of 1.03 is achieved at 303 K for the Bi2Te3‐0.25 wt% sample, which is 70% higher than that of the pristine sample. The recent growing energy crisis draws considerable attention to high‐performance thermoelectric materials. n‐type bismuth telluride is still irreplaceable at near room temperature for commercial application, and therefore, is worthy of further investigation. In this work, nanostructured Bi2Te3 polycrystalline materials with highly enhanced thermoelectric properties are obtained by alkali metal Na solid solution. Na is chosen as the cation site dopant for n‐type polycrystalline Bi2Te3. Na enters the Bi site, introducing holes in the Bi2Te3 matrix and rendering the electrical conductivity tunable from 300 to 1800 Scm–1. The solid solution limit of Na in Bi2Te3 exceeds 0.3 wt%. Owing to the effective solid solution, the Fermi level of Bi2Te3 is properly regulated, leading to an improved Seebeck coefficient. In addition, the scattering of both charge carriers and phonons is modulated, which ensured a high‐power factor and low lattice thermal conductivity. Benefitting from the synergistic optimization of both electrical and thermal transport properties, a maximum figure of merit (ZT) of 1.03 is achieved at 303 K when the doping content is 0.25 wt%, which is 70% higher than that of the pristine sample. This work disclosed an effective strategy for enhancing the performance of n‐type bismuth telluride‐based alloy materials.

Enhanced thermoelectric performance of p-type Bi2Si2Te6 enabled via synergistically optimizing carrier concentration and suppressing bipolar effect

Improved Thermoelectric Performance of P-Type Bi0.5Sb1.5Te3 Through Mn Doping at Elevated Temperature

Enhanced Thermoelectric Performance in N-Type Bi2Te3-Based Alloys Via Suppressing Intrinsic Excitation.

Enhanced Thermoelectric Performance Through Homogenously Dispersed MnTe Nanoparticles in P-Type Bi0.52Sb1.48Te3 Nanocomposites

Synergistical Enhancement of Thermoelectric Properties in N‐type Bi2O2Se by Carrier Engineering and Hierarchical Microstructure

Progressive carrier density optimization contributes to enhanced thermoelectric performance in Bi(Te, Se) compound

Integrating band engineering with point defect scattering for high thermoelectric performance in Bi2Si2Te6

Synergistically Optimized Thermal Conductivity and Carrier Concentration in GeTe by Bi–Se Codoping

Thermoelectric performance of p-type (Bi,Sb)2Te3 incorporating amorphous Sb2S3 nanospheres

Simultaneously optimized thermoelectric performance of n-type Cu2Se alloyed Bi2Te3

Realizing high performance n-type PbTe by synergistically optimizing effective mass and carrier mobility and suppressing bipolar thermal conductivity

High performance of Mg3Bi1.5Sb0.5 based materials for power generation: Revealing the counter-intuitive effect of tuning Bi content on the thermoelectric properties

Synergistic Texturing and Bi/Sb‐Te Antisite Doping Secure High Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3 ‐Based Thin Films

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

2D Bi<sub>2</sub>Te<sub>3</sub>/Si heterostructure with high thermoelectric power factor enabled by interface regulated carrier injection

High near-room temperature figure of merit of n-type Bi2GeTe4-based thermoelectric materials via a stepwise optimization of carrier concentration

Carrier Concentration Optimization for Thermoelectric Performance Enhancement in N-Type Bi2O2Se

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n-type Bi<sub>2</sub>Te<sub>3</sub>

Cooperative regulation of electrical and thermal transport behavior enhancing the thermoelectric performance of SnTe

2D Bi2Te3/Si heterostructure with high thermoelectric power factor enabled by interface regulated carrier injection

Bi8Se7: Delocalized Interlayer π-Bond Interactions Enhancing Carrier Mobility and Thermoelectric Performance near Room Temperature