Abstract:Silica aerogels generally exhibit poor mechanical properties, which seriously restrict their commercial use and makes it necessary to reinforce their structures to obtain materials strong enough to withstand mechanical stresses. The incorporation of polymers into silica aerogels is a promising approach due to the enhancement in mechanical strength afforded and the possibility of imparting the hydrophobicity of the polymers to the resulting aerogels. However, the processes typically employed to prepare polymer-reinforced silica aerogels are complex, arduous and costly, requiring multiple washing and soaking steps for the infiltration of the polymer precursors after gelation and supercritical drying. Additionally, diffusion problems can result in heterogeneity in aerogel monoliths due to the use of various cross-linked polymers and the autoclave-limited dimensions of aerogels. In this study, a facile sol–gel route was developed to fabricate a large (500 cm3) polymer–silica aerogel monolith that was stable under atmospheric conditions and suitable for machining. The synthesis of the polymer–silica aerogels began with a facile one-pot reaction involving resorcinol (R), formaldehyde (F), methyltrimethoxysilane (MTMS), and N-(β-aminoethyl)-γ-aminopropyl-trimethoxysilane (AEAPTES), followed by an ambient-pressure drying process. The resulting aerogels were characterised by nitrogen adsorption–desorption, scanning electron microscopy (SEM), contact angle, and thermal conductivity measurements, and the aerogel mechanical properties were evaluated by a unidirectional compression test. The Young's modulus of compression of the aerogels was observed to increase from 3.95 to 34.88 MPa with an increase in the density of the aerogels from 0.14 to 0.26 g cm−3. Simultaneously, the aerogels were observed to be superhydrophobic, with a contact angle as high as 168°, and exhibited low thermal conductivity (0.038 W m−1 K−1) and good absorption for organic liquids, which are critical characteristics for the practical application of aerogels, especially in energy-saving and oil-/chemical-cleanup practices.

Fabrication of novel water glass-based monolithic aerogels with fibrous skeleton under alkaline for oil sorption and thermal evaporation

Facile fabrication of compressive aerogels with novel core/shell fibrous skeleton for oil sorption and thermal evaporation

Fabrication of elastic SiO2 aerogels with prominent mechanical strength and stability reinforced by SiO2 nanofibers and polyurethane for oil adsorption

Preparation of micro-convex rough interface carbon aerogels with cellulose-lithium bromide (LiBr) molten salt hydrate gelled system and application of oil-water separation

Fibrous Aerogels with Tunable Superwettability for High-Performance Solar-Driven Interfacial Evaporation

Hierarchical porous aero-cryogels for wind energy enhanced solar vapor generation

Engineering aramid nanofibers into robust macroscopic aerogel spheres for water purification

Underwater Mechanically Tough, Elastic, Superhydrophilic Cellulose Nanofiber-Based Aerogels for Water-in-Oil Emulsion Separation and Solar Steam Generation

Synthesis of high specific surface area silica aerogel from rice husk ash via ambient pressure drying

Self-interlocked down Biomass-based carbon fiber aerogel for highly efficient and stable solar steam generation

Fabrication of Cellulose Aerogel from Wheat Straw with Strong Absorptive Capacity

Macro-porous structured aerogel with enhanced ab/desorption kinetics for sorption-based atmospheric water harvesting

Facile preparation of lightweight and robust carbon aerogel monoliths for high-temperature thermal insulation and oil-water separation

Transparent ultrathin SiO2 nanowire aerogel displaying novel properties when interacting with water: A promising versatile functional platform

Synthesis and characterization of silica aerogels by a novel fast ambient pressure drying process

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

All-in-one chitosan-based aerogel with a semi-clad structure for solar-driven interfacial evaporation

A novel low-cost method of silica aerogel fabrication using fly ash and trona ore with ambient pressure drying technique

Fabrication of Elastic Silica-Bacterial Cellulose Composite Aerogels with Nanoscale Interpenetrating Network by Ultrafast Evaporative Drying

Synthesis and characterization of UiO-66-NH 2 incorporated PVA/cellulose nanofibers composite aerogel for enhanced oil–water separation and formaldehyde adsorption

Low-temperature superelastic, anisotropic, silane-crosslinked sodium alginate aerogel for thermal insulation