Abstract:Nanofibrous aerogels constructed by ceramic fiber components (CNFAs) feature lightweight, compressibility, and high-temperature resistance, which are superior to brittle ceramic aerogels assembled from nanoparticles. Up to now, in order to obtain CNFAs with stable framework and multifunctionality such as hydrophobicity and gas absorption, it is necessary to perform binding and surface modification processes, respectively. However, the microstructure as well as properties of CNFAs are deteriorated by the direct addition of binders and modifiers. To tackle these problems, we introduced a unique low-temperature (100 °C) chemical vapor deposition method (LTCVD) to achieve the cross-linking and hydrophobization of Si3N4 CNFA in only one step. More importantly, during the LTCVD process, SiOx coatings and nanowire arrays were in situ formed via vapor–solid (VS) and vapor–liquid–solid (VLS) mechanisms on the surface and intersection of Si3N4 nanofibers, which cemented the aerogel framework, endowed it with hydrophobicity, and improved its oxidation resistance at high temperature. Compared to most of its counterparts, the Si3N4/SiOx CNFA exhibited better mechanical properties, higher capability of oil/water separation (33–76 g·g–1), lower thermal conductivity (0.0157 W/m·K–1), and superior structural stability in a wide temperature range of −196–1200 °C. This work not only presents an excellent Si3N4/SiOx CNFA for the first time but also provides fresh insights for the exquisite preparation strategy of CNFAs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05575?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05575</a>.Synthesis process of the MTMS/VTES xerogel and Si3N4 nanofibers (Figure S1); fabrication of the Si3N4 CNFA via directional freeze casting (Figure S2); illustration of the low-temperature CVD process and experimental setup (Figure S3); description of the growth mechanism of SiOx coating and SNAs (Figure S4); mechanical characterizations of Si3N4/SiOx CNFA (Figure S5); morphology of Si3N4/SiOx CNFA in radial direction (Figure S6); calculation of the Poisson's ratio of Si3N4/SiOx CNFA (Figure S7); demonstration of oil/water separation process (Figure S8); illustration of the measurement setup of ablation at under butane flame (Figure S9); XRD patterns, TEM images, and EDS mappings of Si3N4/SiOx CNFA after 30 min isothermal oxidation (Figure S10); comparison of different Si3N4 insulation materials (Figure S11) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_001.pdf">PDF</a>)Axial compression and recovery processes of Si3N4/SiOx CNFA (movie S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_002.avi">AVI</a>)Radial compression and recovery processes of Si3N4/SiOx CNFA (movie S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_003.avi">AVI</a>)Demonstration of the compression and recovery processes using a 500 g weight (movie S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_004.avi">AVI</a>)Low-temperature hyperelasticity in liquid nitrogen (movie S4) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_005.avi">AVI</a>)High-temperature hyperelasticity in the flame of a butane blowtorch (movie S5) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_006.avi">AVI</a>)Demonstration of the hydrophobicity of Si3N4/SiOx CNFA (movie S6) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_007.avi">AVI</a>)Absorption process of dichloromethane (movie S7) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_008.avi">AVI</a>)Recycle process of Si3N4/SiOx CNFA by squeezing (movie S8) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_009.avi">AVI</a>)Repetitive absorption process of dichloromethane after squeezing (movie S9) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_010.avi">AVI</a>)This article has not yet been cited by other publications.

Underwater Mechanically Tough, Elastic, Superhydrophilic Cellulose Nanofiber-Based Aerogels for Water-in-Oil Emulsion Separation and Solar Steam Generation

Ultralight, Elastic, Magnetic and Superhydrophobic Cellulose Nanofibril Based Aerogel with Layer-Support Structure Designed for Both Excellent Oil-Water Separation and Efficient PM2.5 Removal

Anisotropic cellulose nanofiber/chitosan aerogel with thermal management and oil absorption properties

Preparation of micro-convex rough interface carbon aerogels with cellulose-lithium bromide (LiBr) molten salt hydrate gelled system and application of oil-water separation

Facile Fabrication of Superelastic, Hydrophobic and Hierarchical polydimethylsiloxane@nanocelluloses Aerogels for Durable Oil/Water Separation

One-pot fabrication of hydrophobic, superelastic, harakeke-derived nanocellulose aerogels with excellent shape recovery for oil adsorption and water-in-oil emulsion separation

Anisotropic and high-strength SiO2/cellulose nanofiber composite aerogel with thermal superinsulation and superhydrophobicity

Superior Stable, Hydrophobic and Multifunctional Nanocellulose Hybrid Aerogel Via Rapid UV Induced In-Situ Polymerization

Preparation of antifouling and highly hydrophobic cellulose nanofibers/alginate aerogels by bidirectional freeze-drying for water-oil separation in the ocean environment

One-pot fabrication of hydrophilic-oleophobic cellulose nanofiber-silane composite aerogels for selectively absorbing water from oil–water mixtures

Low temperature-resistant superhydrophobic and elastic cellulose aerogels derived from seaweed solid waste as efficient oil traps for oil/water separation

Hierarchical aerogels based on cellulose nanofibers and long-chain polymers for enhancing oil–water separation efficiency

Nanofibrous Aerogels with Vertically Aligned Microchannels for Efficient Solar Steam Generation

Highly compressible and hydrophobic nanofibrillated cellulose aerogels for cyclic oil/water separation

Cellulose Nanofibril (CNF) Based Aerogels Prepared by a Facile Process and the Investigation of Thermal Insulation Performance

Highly compressible and durable superhydrophobic cellulose aerogels for oil/water emulsion separation with high flux

A Facile Approach for Preparation of Underwater Superoleophobicity Cellulose/chitosan Composite Aerogel for Oil/water Separation

Multifunctional Superelastic Cellulose Nanofibrils Aerogel by Dual Ice‐Templating Assembly

Si 3 N 4 Nanofibrous Aerogel with In Situ Growth of SiO x Coating and Nanowires for Oil/Water Separation and Thermal Insulation

A hydrophobic/oleophilic silica‐cellulose composite aerogel for oil–water separation

Superelastic chitin nanofibril/chitosan aerogel for effective circulating and continuous oil-water separation