Abstract:The amino substituted 1,4-naphthoquinone photosensitizers, viz; BrA5; 2-bromo-3-(pentylamino)naphthalene-1,4-dione, BrA6; 2-bromo-3-(hexylamino)naphthalene-1,4-dione, BrA7; 2-bromo-3-(heptylamino)naphthalene-1,4-dione, BrA8; 2-bromo-3-(octylamino)naphthalene-1,4-dione, have been synthesized from 2,3-dibromonaphthalene-1,4-dione. These photosensitizers were employed for the first time in TiO 2 NG-based dye-sensitized solar cells (DSSCs). The TiO 2 nanograin (TiO 2 NG) compact layer was prepared using chemical bath deposition to reduce the electron recombination. The porous layer of TiO 2 NG was deposited using the doctor blade method, followed by calcination at 450 °C. After sensitization of BrA5, BrA6, BrA7, and BrA8 photosensitizers on the TiO 2 NG photoelectrodes, the optical properties of photoelectrodes show the broad band each in the visible region, which is assigned to n → π* charge-transfer transition. FT-IR analysis of photosensitizers showed the existence of N–H bands. The XRD pattern of TiO 2 NG photoanode confirmed the anatase and rutile phase. The E 0-0 and HOMO–LUMO energy levels were calculated using UV–visible, fluorescence spectroscopy, and cyclic voltammetry, respectively. The E 0-0 of BrA5 and BrA7 is 2.35 eV, while that of BrA6 and BrA8 is 2.33 eV. The DSSCs system is fabricated by loading the BrA5, BrA6, BrA7, and BrA8 photosensitizers on TiO 2 NGs. The photosensitizer's photovoltaic performances of TiO 2 NG-based electrodes were studied through electrochemical impedance analysis. The J–V curve analysis and characterization show that the efficient light absorption and reduction of charge recombination at the TiO 2 NG photoanodes are the main reasons for the efficiency of the TiO 2 NG/BrA5, TiO 2 NG/BrA6, TiO 2 NG/BrA7, and TiO 2 NG/BrA8 photoelectrodes. Compared to DSSCs employing other photosensitizers (BrA5, BrA6, and BrA7) on a TiO 2 NG photoelectrode (TiO 2 NG/BrA5 (0.33%), TiO 2 NG/BrA6 (0.35%), TiO 2 NG/BrA7 (0.36%), those using BrA8 demonstrate higher power conversion efficiencies. Specifically, TiO 2 NG/BrA8 shows the highest efficiency at 0.43%. The enhanced performance of the TiO 2 NG/BrA8-based DSSC can be attributed to its increased dye loading and rapid electron injection. The present study will open a new route to fabricate highly efficient DSSCs using amino-substituted 1,4-naphthoquinone photosensitizers.

Computational, experimental investigations on organic Solanum nigrum fruit extract sensitized titanium dioxide for enhanced photovoltaic performance

Performance of Natural Dye Extracted from Annatto, Black Plum, Turmeric, Red Spinach, and Cactus as Photosensitizers in TiO2NP/TiNT Composites for Solar Cell Applications

Computational, Investigational Explorations on Structural, Electro-Optic Behavior of Pelargonidin Organic Colorant for TiO2 Based DSSCs

Enhanced Efficiency of Dye Sensitized Solar Cell Using Eu Doped TiO2-ZrO2 Nanocomposite

Experimental, computational analysis of Butein and Lanceoletin for natural dye-sensitized solar cells and stabilizing efficiency by IoT

Nanoengineering TiO2 for evaluating performance in dye sensitized solar cells with natural dyes

Fabrication of an efficient amino substituted 1,4-naphthoquinones sensitized TiO2 nanograin based dye sensitized solar cells

Selected organic dyes (carminic acid, pyrocatechol violet and dithizone) sensitized metal (silver, neodymium) doped TiO2/ZnO nanostructured materials: A photoanode for hybrid bulk heterojunction solar cells

Controlled reaction time of TiO2 and cocktail co-sensitization for improved DSSC performance

Prickly Pear Fruit Extract: Capping Agent for the Sol–Gel Synthesis of Discrete Titanium Dioxide Nanoparticles and Sensitizer for Dye-Sensitized Solar Cell

Efficient Organic-Dye-Sensitized Nanocrystalline Tio2 Solar Cells

TiO2-Ag AND NATURAL DYE CO-PIGMENTED WITH SALICYLIC ACID FOR DYE-SENSITIZED SOLAR CELL (DSSC) APPLICATION

Biosynthesis of TiO 2 nanostructures using camellia sinensis extract (polyphenols) and Investigation of their execution as Photoanodes in Photovoltaic device

Enhancement of Natural Dye-Sensitized Solar Cell Efficiency Through TiO2 Hombikat UV100 and TiO2 P25 Photoanode Optimization

TiO 2 nanoparticle seeds transformed into nanotubes for effective dye-sensitized solar cell application

Natural sensitizer extracted from Mussaenda erythrophylla for dye-sensitized solar cell

Solar-To-Electric Performance Enhancement by Titanium Oxide Nanoparticles Coated with Porous Yttrium Oxide for Dye-Sensitized Solar Cells

Influence of various solvents in extraction of natural pigments from Annona Atemoya and Physalis Peruviana as photosensitizers for dye-sensitized solar cells

How to optimize the interface between photosensitizers and TiO2 nanocrystals with molecular engineering to enhance performances of dye-sensitized solar cells?

Potential of Betanin Natural Dye for Solar Cells Application

Natural dye-sensitive solar cells (N-DSSCs) are fabricated using TiO2/1 wt% SrTiO3 as photoanodes