Abstract:This paper presents recent research into the effects of etching treatments on the interface strength between nickel titanium (NiTi) fibers and a bismuth tin (BiSn) matrix composing a self-healing metal-metal composite. Self-healing metallic composites have the potential to create a paradigm shift in the design of engineered structures by changing what is considered a “failure,” resulting in lighter weight and safer structures with reduced maintenance requirements. Some of the most advanced self-healing metal-metal composites are composed of NiTi shape memory alloy fibers reinforcing an off-eutectic metal matrix. When activated these materials can recover from macroscopic deformations and matrix fracture, returning to their original geometry and then soldering cracks closed. This process restores nearly 100% of original strength without using any consumable adhesives. As a result, this healing process has the potential to be repeated indefinitely. The strength of the interface between the fibers and matrix is critical to creating high-quality composites because it governs the ability to transfer loads between the matrix and fibers, through the structure. Unfortunately, NiTi forms an inert native titanium oxide (TiO2) surface layer when exposed to air that is notoriously hard to bond to. To overcome this weak bonding most initial work in self-healing using NiTi fibers employed structural anchors within specimens for the NiTi to react against. This approach was functional for demonstrating basic components of self-healing abilities but negated distributed load transfer between the fibers and matrix of the composite structure, creating concentrated load-paths and resulting in a poor composite structure. Chemical etching in an inert environment has been performed to remove the inert TiO2 surface layer from NiTi, but the resulting interface strength has not previously been quantified. This paper presents an experimental investigation of the strength of the interface between NiTi and BiSn with both the native oxide layer present (control) and after undergoing a chemical etching process in an inert environment to remove the TiO2 layer and coating the NiTi while in the inert environment to prevent re-formation of the TiO2 layer. Testing was performed using single fibers of NiTi cast into and extending out of a BiSn block. The fiber/wire was mechanically pulled out of the BiSn block while measuring the force applied and recording video of the process. The experimental evaluation of these interface strengths in this research will enable the efficient design of composite materials to ensure proper load transfer between composite fibers and matrix to maximize strength and support self-healing capabilities.

Gravity and Semisolid Casting of Self-Healing Aluminum Matrix Composites

Investigation into the Performance of NiTi Shape Memory Alloy Wire Reinforced Sn-Bi Self-Healing Metal Matrix Composite

Nacre-mimetic Composite with Intrinsic Self-Healing and Shape-Programming Capability

Investigation Into Etching Effects on the Interface Strength Between Nickel Titanium and Bismuth Tin for the Creation of Metal Matrix Self Healing Composites

A novel self-healing composite made of thermally reversible polymer and shape memory alloy reinforcement

Integrated self-monitoring and self-healing continuous carbon fiber reinforced thermoplastic structures using dual-material three-dimensional printing technology

Mechanical Properties as a Function of Casting Process of Aluminum–Silicon Alloy Matrix Composites

The Influence of the Casting Methods and Variables on the Microstructural Properties of A356–SiC Nanocomposite

Nanotechnology-Enabled Rapid Investment Casting of Aluminum Alloy 7075

Advances in Selective Laser Melting of Nitinol Shape Memory Alloy Part Production

Enhancing Aluminum-Based Composite Manufacturing: Harnessing Si3N4 Reinforcement via Stir Casting Technique

Wear-triggered Self-Healing Behavior on the Surface of Nanocrystalline Nickel Aluminum Bronze/ti 3 SiC 2 Composites

Physical, Corrosion and Microstructural Analysis of A356/SiC Nanocomposites Fabricated through Stir Casting Process

Study on self-healing mechanism of magnetic nano-powders functionalized fiber reinforced thermoplastic composites

Self-healing concrete: Fabrication, advancement, and effectiveness for long-term integrity of concrete infrastructures

Fatigue and Fracture of Small Cracks in Superelastic Nitinol

Optimizing the Gating System for Rapid Investment Casting of Shape Memory Alloys: Computational Numerical Analysis for Defect Minimization in a Simple-Cubic Cell Structure

Castability of Cu-Al-Mn shape memory alloy in a rapid investment casting process: computational and experimental analysis

Hybrid Filler Actions on Functional Performance Evaluation of Magnesium Alloy (AZ61) Hybrid Nanocomposites

Fabrication of as-cast Al matrix composite reinforced by Al2O3/Al3Ni hybrid particles via in-situ reaction and evaluation of its mechanical properties

Autonomous healing of fatigue cracks via cold welding