Abstract:The Ti-43.5Al-4Nb-1Mo-0.1B (TNM) alloy is prone to emerge surface cracks and other defects during processing and service, which will deteriorate the mechanical properties and fatigue life of the materials. In this work, a novel electroshock treatment (EST) for the surface crack repair and strengthening process has been proposed. Combined with near-in-situ experiments and theoretical analysis, the influence law and healing mechanism of different current densities and EST modes on the healing of surface cracks in the alloy were investigated. The scanning electron microscopy (SEM) near-in-situ observation reveals that the main factors influencing the healing of surface cracks relate to the time of energization, the current density, and the cracking angle. Meanwhile, the crack tip and locally bulging deflected positions are more likely to be healed in a short time under continuous EST mode and medium current density (75 A/mm 2 ). The surface crack width at the calibration position decreases from 0.47 μm and 2.23 μm to 0 μm and 0.03 μm, respectively. The electron back scattered diffraction (EBSD) results show that the dislocation density increases around the surface crack healing area, and the dislocation density at the crack tip and away from the healing region is decreased and uniformly distributed after EST, which can further suppress the generation and propagation of the crack, resulting in a 20.1 % increase in tensile strength and a 40.3 % increase in fracture strain. Considering the coupling influence of the thermal and non-thermal effects of EST, a two-stage progressive atomic diffusion of thermal compressive stresses and crack bonding interfaces has been proposed to describe the evolution process of surface crack healing during EST.

Wear-triggered Self-Healing Behavior on the Surface of Nanocrystalline Nickel Aluminum Bronze/ti 3 SiC 2 Composites

Development of Yttrium Titanate/Nickel Nanocomposites with Self Crack-Healing Ability and Potential Application as Thermal Barrier Coating Material

Wear-triggered self-repairing behavior of bionic textured AISI 4140 steel filled with multi-solid lubricants

Tribological behaviors of nanotwinned Al alloys

High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma Spraying

Revealing the wear mechanism of NiTi alloy coatings with biomimetic sandwich structures by laser cladding

Fretting Wear Properties of Plasma-Sprayed Ti3SiC2 Coatings with Oxidative Crack-Healing Feature

Investigation into the Performance of NiTi Shape Memory Alloy Wire Reinforced Sn-Bi Self-Healing Metal Matrix Composite

Enhancing fretting wear behavior of Ti64 alloy: The impact of surface textures and CrN-MoS 2 -Ag composite coating

Reactive wear protection through strong and deformable oxide nanocomposite surfaces

Near-in-situ investigation of surface crack healing and strengthening mechanism of Ti-43.5Al-4Nb-1Mo-0.1B alloy by novel electroshock treatment

Preparation of Self-Lubricating NiTi Alloy and Its Self-Adaptive Behavior

Effect of Different Levels of Free Water in Oil on the Fretting Wear of Nickel-Aluminum Bronze Based Composites

Autonomous healing of fatigue cracks via cold welding

Tribological properties of self-healing NiCrAlY/Cr3C2-Ti3AlC2 coating at high temperatures

Study of Nanoscale Wear of SiC/Al Nanocomposites Using Molecular Dynamics Simulations

Friction and Wear Resistance of Nanostructured TiNi Shape Memory Alloy

Dual-feedback Healing Mechanism Redefining Anti-Oxidation Coatings in Fiber Reinforced Composites

Study on nanoscale friction and wear mechanism of nickel-based single crystal superalloy by molecular dynamics simulations

Bioinspired self-healing nickel coating

Promoting crack self-healing of nanocomposite coating by double slip systemic semi-coherent interface dislocation