Abstract:This paper explores the optimization of Tungsten-Inert-Gas (TIG) welding process parameters for creating a hybrid structure of Aluminium 6061 and Stainless Steel 304 using a copper filler rod (ER-Cu). The Welding of these two materials has industrial relevance owing to its weight reduction capabilities and environmental benefits. However, Aluminium and Stainless-Steel have different melting points and thermal properties. Aluminium has twice coefficient of thermal expansion and six times coefficient of thermal conductance as compared to Stainless-Steel. This difference often results in residual stresses and brittle intermetallic compounds in the weld region. We have chosen the Welding Current, Welding Speed, and Gas Flow Rate as input parameters, and Ultimate Tensile Strength (UTS) and Micro-hardness as response parameters. We have employed the Response Surface Methodology (RSM) using a Box-Behnken design to evaluate the influence of input parameters on UTS and Micro-hardness. Furthermore, an Analysis of Variance (ANOVA) is conducted to determine the input parameters' significance on the response parameters. Our surface plots demonstrate that UTS improves with increased Welding Current and reduced Welding Speed. Simultaneously, Micro-hardness increases with elevated Welding Speed and decreased current, up to a specific limit. The peak value of UTS (79 MPa) was observed with a Current range of 85-90 A, Speed range of 95-100 mm/min, and Gas Flow Rate of 14.5-15 l/min. On the other hand, maximum Micro-hardness (260HV) was obtained with a Current range of 80-85 A, Speed range of 105-110 mm/min, and Gas Flow Rate of 14.5-15 l/min. This research contributes to improving the manufacturing process of hybrid structures, specifically by optimizing the advantages of both Aluminium and Stainless Steel while addressing the challenges that arise during their combination. The study's conclusions have major consequences for sectors looking to take advantage on the mutually beneficial characteristics of different metals in welding applications.

Experimental Investigation of Mechanical Properties and Characterization of Mild Steel Weldment Fabricated Using Pulse/Robotic Pulse Metal Inert Gas Welding Processes

Experimental evaluation of longitudinal tensile properties of ferritic stainless-steel weldment joined by metal inert gas, pulse metal inert gas, and tungsten inert gas welding

Process Parameter Optimization and Metallurgical Characterization in Double Pulse MIG Welding of SS 304 H

Microstructural characteristics and tensile properties of ER70S-6 manufactured by Robotic CMT wire-and-arc additive manufacturing

Mechanical and micro-structural studies of pulsed and constant current TIG weldments of super duplex stainless steels and Austenitic stainless steels

Evaluating the TIG welding process mechanically and microstructurally in relation to welding parameters

On the Heat-Affected Zone Role for Mechanical Properties of Structural-Steel MIG and CMT–MIG Weldments

Effect of Different Welding Modes on Morphology and Property of SS316L Stainless Steel Deposition by Robotic Metal-Inert Gas Welding

PARAMETRIC OPTIMIZATION OF MIG WELDING FOR STAINLESS STEEL (SS-304) AND LOW CARBON STEEL USING TAGUCHI DESIGN METHOD

Experimental Investigation and Parametric Optimization of the Tungsten Inert Gas Welding Process Parameters of Dissimilar Metals

Mechanical and microstructural characterization of AISI SAE 4130 steel welded joints made by robotic gas metal arc welding process: influence of electrode work angle in 'T' welded joints

Influence of controlled and conventional short circuit waveforms on mechanical and microstructural effects in the gas metal arc welding processes

Investigating parametric effects during TIG welding of dissimilar metals

A study on multi-objective optimization of pulsed TIG welding parameters and their effect on joint properties of high manganese steels using Taguchi based GRA approach

Experimental Investigation On The Microstructure And Mechanical Properties Of Dss2205 And Ss304L Dissimilar Weldments

Microstructural and mechanical properties of GMAW welded 572 GR 50 steel

Microstructural and mechanical properties analysis of SS 316L structure fabricated using CMT-wire arc additive manufacturing

An innovative pulsed current arc welding technology for armor steel: Processes, microstructure, and mechanical properties

Influence of Post-Weld Heat Treatment on Microstructural and Mechanical Properties of Dual-Phase Steel Gas Metal Arc-Welded Joints

Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process