Abstract:In both chinese villages and towns buildings, the use of Hollow bucket walls are widely observed, but the effectiveness of filling them with insulation material has not been clarified. In this study, the effects of different insulation materials on the energy consumption of hollow bucket walls have been analyzed. The heat flowmeter method has been used to measure the heat transfer coefficients of the walls, which has been compared with theoretically calculated values. Meanwhile, the building Energy Consumption of different insulation enclosures was numerically modeled. The results showed that the heat transfer coefficient of the Dahlen brick cavity wall without infill material was the largest at 1.86 W/(m 2 ·K). The number of heat transfers in the silt terra cotta air hopper wall in the enclosure with infill material was 0.89 W/(m 2 ·K). The heat transfer coefficient of the expanded perlite cavity wall was 0.88 W/(m 2 ·K). The heat transfer coefficient of the rice husk air hopper wall was 0.8 W/(m 2 ·K). It can be seen that the walls of rice husks have the lowest heat transfer coefficient and the best thermal insulation. The measured heat transfer coefficients of the air hopper walls are greater than the theoretically calculated heat transfer coefficients by comparative analysis. The average bias error is only 3 %. In addition, numerical simulations of the envelope with different insulation materials showed that the internal surface temperature of the rice husk-filled wall was 21.89 °C among the walls tested. The internal surface conduction heat transfer rate was 58.53 W. The total heat loss energy for regional infiltration was 1.056 MJ. All three values are the lowest. However, the total heat gain energy for regional infiltration is up to 0.231 MJ, which confirms the experimental results. These results can be used to develop design specifications for hollow hopper walls with good insulation properties and demonstrate how waste materials such as rice husks and straws can be reused in rural areas.

Investigating the characteristics and thermal performance of plaster composites enhanced with paddy husk for sustainable Residential construction

Experimental research on a feasible rice husk/geopolymer foam building insulation material

Studying the possibility of obtaining heat-insulating building materials based on lime carbonization hardening and rice husk

Performance Study of Lightweight Insulating Mortar Reinforced with Straw Fiber

Investigation of Thermal Conductivity and Sound Absorption Properties of Rice Straw Fiber/Polylactic Acid Biocomposite Material

Rice Husk-Based Insulators: Manufacturing Process and Thermal Potential Assessment

Research on Thermal Insulation Properties of Plant Fiber Composite Building Material: A Review

Moisture buffer, fire resistance and insulation potential of novel bio-clay plaster

Lightweight Biobased Polyurethane Composites Derived from Liquefied Polyol Reinforced by Biomass Sources with High Mechanical Property and Enhanced Fire-Resistance Performance

Experimental performance assessment of a novel insulation plaster as an energy-efficient retrofit solution for external walls: A key building material towards low/zero carbon buildings

Evaluation of Thermal and Acoustic Properties of Oil Palm Empty Fruit Bunch/Sugarcane Bagasse Fibres Based Hybrid Composites for Wall Buildings Thermal Insulation

Paraffin/beeswax/plaster as thermal energy storage composite: Characterization and application in buildings

Development of Clay-Composite Plasters Integrating Industrial Waste

Mechanical and Thermo-Physical Performances of Gypsum-Based PCM Composite Materials Reinforced with Carbon Fiber

Effect of phase change microcapsules on the properties of whisker-reinforced phosphogypsum-based composites

Fabrication and Analysis of Thermal Insulation Ceiling Panel from Corn Husk Fiber

Thermal characterization of a new bio-composite building material based on plaster and waste chicken feathers

Energy consumption of hollow bucket walls filled with different insulation materials

Development of a new lightweight gypsum composite: Effect of mixed treatment of barley straws with hot water and bio-based phase change material on the thermo-mechanical properties

Effect of Fiber Content on Sound Absorption, Thermal Conductivity, and Compression Strength of Straw Fiber-filled Rigid Polyurethane Foams

Transforming waste disposals into building materials to investigate energy savings and carbon emission mitigation potential