Rice Husk-Based Insulators: Manufacturing Process and Thermal Potential Assessment

Luis Cigarruista Solís,Miguel Chen Austin,Euclides Deago,Guillermo López,Nacari Marin-Calvo

DOI: https://doi.org/10.3390/ma17112589

IF: 3.4

2024-05-28

Materials

Abstract:The development of bio-insultation materials has attracted increasing attention in building energy-saving fields. In tropical and hot–humid climates, building envelope insulation is important for an energy efficient and comfortable indoor environment. In this study, several experiments were carried out on a bio-insulation material, which was prepared by using rice husk as a raw material. Square rice husk-based insultation panels were developed, considering the ASTM C-177 dimensions, to perform thermal conductivity coefficient tests. The thermal conductivity coefficient obtained was 0.073 W/(m K), which is in the range of conventional thermal insulators. In a second phase of this study, two experimental enclosures (chambers) were constructed, one with rice husk-based insulation panels and the second one without this insulation. The measures of the temperatures and thermal flows through the chambers were obtained with an electronic module based on the ARDUINO platform. This module consisted of three DS18B20 temperature sensors and four Peltier plates. Daily temperature and heat flux data were collected for the two chambers during the dry season in Panama, specifically between April and May. In the experimental chamber that did not have rice husk panel insulation on the roof, a flow of up to 28.18 W/m2 was observed, while in the chamber that did have rice husk panels, the presence of a flow toward the interior was rarely observed. The rice husk-based insulation panels showed comparable performance with conventional insulators, as a sustainable solution that takes advantage of a local resource to improve thermal comfort and the reduction of the environmental impact.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

What problem does this paper attempt to address?

This paper mainly discusses the process of using rice husks as raw materials to manufacture insulation materials and their thermal potential evaluation. The research team focuses on building energy conservation and indoor environmental comfort under tropical and humid climates. They have produced rice husk-based insulation boards and conducted thermal conductivity tests according to ASTM C-177 standards, resulting in a thermal conductivity of 0.073 W/(m K), which is equivalent to traditional insulation materials. Subsequently, the researchers built two experimental chambers, one using rice husk insulation boards and the other without, to compare the insulation effects by monitoring the temperature and heat flux. The experiments showed that the heat flow into the chamber using rice husk boards was significantly reduced, proving that rice husk insulation boards have comparable performance to traditional materials and are a sustainable solution that can improve energy efficiency and indoor thermal comfort, and reduce environmental impact by utilizing local resources. The paper also emphasizes the importance of roof insulation in tropical regions and the potential of utilizing agricultural waste such as rice husks.