Abstract:As one of the most influential factors leading to gear vibrations, transmission errors of the engaging gears must be controlled to achieve a desirable dynamic performance for a power transmission system. It is well known that tooth modification is an effective way to reduce the fluctuations of the transmission error of a gear pair. The challenge is determining how to establish a quantitative relationship between the tooth modification parameters and the transmission error fluctuations of a gear pair. The present study aims to reveal the sensitivity of the tooth modification parameters on the transmission error fluctuations of a helical planetary gear train in a wind turbine gearbox. For this purpose, a sophisticated parametric three-dimensional contact model that included the micro-geometries of the tooth modification is developed in the ROMAX® environment. Based on this model, a loaded tooth contact analysis is carried out to compute the meshing characteristics, such as the contact pressure and transmission error of each gear pair in the planetary gear train. With the obtained meshing characteristics, the tooth modification amounts of the engaging gears were determined using empirical formulas. These modification amounts are designated as the mean values of the samples generated by the central composite method. After repeating the loaded tooth contact analysis process for each generated sample, a quadratic polynomial function is derived using the response surface method to describe the quantitative relationship between the tooth modification parameters and the dynamic transmission error fluctuations. A large number of random samples are generated using a Monte Carlo method, and the corresponding dynamic transmission error fluctuations are determined with the aforementioned quadratic polynomial function. Based on these samples, a reliability sensitivity analysis is carried out to demonstrate the effects of the tooth modification parameters on the dynamic transmission error fluctuations of the helical planetary gear train.

Modélisation et analyse de l'erreur statique de transmission d'un engrenage. Influence des déformations des roues et interactions entre les couples de dents en prise

Stochastic dynamics of a finite-size spiking neural network

Dynamic modeling and fault feature extraction of a wind turbine gearbox under random excitation

Effect of an original gear mesh modelling on the modal behaviour of gear transmission

A MATHEMATICAL MODEL FOR ANALYZING THE INFLUENCE OF SHAPE DEVIATIONS AND MOUNTING ERRORS ON GEAR DYNAMIC BEHAVIOUR

Modelling of an Industrial Robot Joint Transmission in Presence of Gear Defect

Modelling of elastoplastic, multi-scale and multi-contact problems: application to worm gears

Modeling and Detection of Localized Tooth Defects in Geared Systems

Analysis of machining errors' effects on gear pair meshing using contact finite element method

Experimental and Numerical Analysis of Helical Gear of Raw Mill in Hamma Bouzian Cement

On the interest of a semi-empirical model for the tooth friction coefficient in gear transmissions

General Meshing Modeling and Dynamic Characteristics Analysis of Helical Gear Pair with Tooth Surface Deviation

New Approach to Study the Dynamic Performance of Worm Gear Drive Model

Reliability sensitivity analysis of tooth modification on dynamic transmission error of helical planetary gears

A quantum-theoretical approach to the phenomenon of directed mutations in bacteria

THE DYNAMIC MODELLING OF A SPUR GEAR IN MESH INCLUDING FRICTION AND A CRACK

Design, modeling and dynamic simulation of three double stage gearboxes with different module, mesh stiffness fluctuation and different level tooth breakage

Dynamic models for power transmission monitoring in non-stationary conditions based on IAS signals

Statistical Analysis for Transmission Error of Gear System with Mechanical and Thermal Deformation Uncertainties

Modelling method, simulation and experimental verification of hypoid gear involved tooth surface deviation under manufacturing process

Variability of Critical Rotational Speeds of Gearbox by Misalignement and Manufacturing Errors