Abstract:Titanium carbides attract attention from both academic and industry fields because of their intriguing mechanical properties and proven potential as appealing candidates in the variety of fields such as nanomechanics, nanoelectronics, energy storage and oil/water separation devices. A recent study revealed that the presence of Ti8C5 not only improves the impact strength of composites as coatings, but also possesses significant strengthening performance as an interlayer material in composites by forming strong bonding between different matrices, which sheds light on the design of impact protection composite materials. To further investigate the impact resistance and strengthening mechanism of Ti8C5, a pilot Molecular Dynamics (MD) study utilizing comb3 potential is carried out on a Ti8C5 nanosheet by subjecting it to hypervelocity impacts. The deformation behaviour of Ti8C5 and the related impact resist mechanisms are assessed in this research. At a low impact velocity ~0.5 km/s, the main resonance frequency of Ti8C5 is 11.9 GHz and its low Q factor (111.9) indicates a decent energy damping capability, which would eliminate the received energy in an interfacial reflection process and weaken the shock waves for Ti8C5 strengthened composites. As the impact velocity increases above the threshold of 1.8 km/s, Ti8C5 demonstrates brittle behaviour, which is signified by its insignificant out-of-plane deformation prior to crack initiation. When tracking atomic Von Mises stress distribution, the elastic wave propagation velocity of Ti8C5 is calculated to be 5.34 and 5.90 km/s for X and Y directions, respectively. These figures are inferior compared with graphene and copper, which indicate slower energy delocalization rates and thus less energy dissipation via deformation is expected prior to bond break. However, because of its relatively small mass density comparing with copper, Ti8C5 presents superior specific penetration. This study provides a fundamental understanding of the deformation and penetration mechanisms of titanium carbide nanosheets under impact, which is crucial in order to facilitate emerging impact protection applications for titanium carbide-related composites.

Atomic erosion behavior and influence mechanism during erosion impact of TiC coatings with different crystal faces in oil production environment: A molecular dynamics simulation

Atomistic Investigation of Titanium Carbide Ti8C5 under Impact Loading

Probing the Atomic Erosion Wear Characteristics of TiC-Coated Fe in Oil and Gas Drilling Environments

Atomistic Investigation of the Titanium Carbide MXenes under Impact Loading.

Study on the Erosion Resistance of Different TiN Crystal Planes by Molecular Dynamics

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Atomistic simulation of tribology behaviors of Ti-based FeCoNiTi high entropy alloy coating during nanoscratching

Solid particle erosion behavior and failure mechanism of TiZrN coatings for Ti-6Al-4V alloy

Influence of Carbon Contents on the Structure and Tribocorrosion Properties of Tisicn Coatings on Ti6al4v

Simulation of TiN/Ti Multilayer Coating under the Impact of Multiple Particles Based on Cohesive Element

Impact-sliding wear properties of PVD CrN and WC/C coatings

Evolution of microstructure and wear mechanism in laser clad Al0.5CoCrFeNiSi0.5Tix coatings in response to the Ti addition

Microstructural characteristics and wear-resistant mechanisms of WC-TiC-co coatings with varying TiC contents

Preparation and characterization of wear resistant TiO layer on Ti alloy

Influence of Cr on the Surface Properties of the Micro-Textured WC+Co Alloy Coating

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Improved adhesion and erosion wear performance of CrSiN/Cr multi-layer coatings on Ti alloy by inserting ductile Cr layers

Wear and Failure Analysis of Ti-6Al-4V Titanium Alloy with a Protective Coating during High-Speed Erosion

Microstructure and Erosion Behavior of Arc Spraying NiTi/Cr_3C_2 Coat Added with Nano TiC Particles

Influence of the substrate hardness on the cavitation erosion resistance of TiN coating

Why can tiAicrsiYN-based adaptive coatings deliver exceptional performance under extreme frictional conditions?