Abstract:Currently, fatigue-resistance topology optimization has received ever increasing attention, in which most of the literature considers this issue as a simple extension of stress-based topology optimization. However, previous approaches may not be applicable when considering general loads, as the conventional uniaxial rainflow counting method, commonly employed in prior studies, can result in significant errors. Furthermore, the inclusion of general loads introduces additional nonlinearity to fatigue-resistant topology optimization, posing challenges in identifying the optimal solution. To this end, a novel methodology for fatigue-resistance topology optimization considering general loads is proposed in this paper. The independent rainflow counting method is utilized during the process of structural damage estimation. The damage penalization model is subsequently adopted to reduce the nonlinearity by scaling the value of fatigue damage. To illustrate the necessity of an independent rainflow counting method, an example of a double L -shaped structure subjected to general loads is presented. The augmented Lagrangian (AL) approach is introduced to transform numerous damage constraint equations into the objective function, generating a sequence of box-constrained optimization sub-problems. After employing the typical SIMP technique, the relative sensitivities of the AL function regarding design variables are derived, which facilitates the efficient solution using the method of moving asymptotes (MMA). Through 2D and 3D numerical tests, the effectiveness of the proposed method is validated in comparison to the traditional method. Further investigation is conducted into the influences of general loads, damage penalization model, and manufacturing error robustness. In addition, the fatigue-resistance performance of a bearing support of a wind turbine is improved by the suggested approach, and its overall weight is decreased by 25.40%. The proposed method addresses the nonlinear and localized nature of fatigue-resistant topology optimization more efficiently. The results indicate that the proposed method can develop a lightweight design for structures under general loads.

A Sequential Multiaxial Cycle Counting Algorithm Based on the Modified Wang–Brown Method

Algorithms for multiaxial cycle counting method and fatigue life prediction based on the weight function critical plane under random loading

Modified Rainflow Counting Algorithm for Fatigue Life Calculation

An improved rainflow counting method for multiaxial stress states using the minimum circumscribed circle method to identify shear stress ranges

A New Method for Studying the Effect of Multiaxial Strain States on Low Cycle Non-Proportional Fatigue Prediction

Multiaxial cycle counting method based on path-dependent line integral

Low-Cycle Fatigue Life Prediction Under Multiaxial Non-Proportional Loads

Cycle Counting Methods of Variable Amplitude Loading for Fatigue Analysis

An Extension Research on the Theory of Critical Distances for Multiaxial Notch Fatigue Finite Life Prediction

High-cycle and low-cycle fatigue life prediction under random multiaxial loadings without cycle counting

Investigation of the Low-Cycle Fatigue Life under Multi-Axial Nonproportional Loading

Multiaxial high-cycle fatigue failure and life prediction based on critical plane method

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

A modified method of von Mises stress-based MWCM for fatigue-life prediction under fully-reversed axial-torsion proportional loads

A fatigue-resistance topology optimization formulation for continua subject to general loads using rainflow counting

A new fast four-point rainflow cycle counting algorithm by employing a new loop iteration mode for fatigue life estimation

One-stage extraction four-point algorithm for rainflow cycle counting in fatigue life estimation

Multiaxial Notch Fatigue Life Prediction Based on the Dominated Loading Modes under Variable Amplitude Loading

A Novel Energy-Critical Multiaxial Fatigue Life Prediction for Low Cycle Fatigue under Mixed-Mode Loading

ABAQUS-BASED MULTIAXIAL CREEP FATIGUE PREDICTION METHOD

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading