Abstract:Aqueous zinc ion batteries (A-ZIBs) have been used as new alternative batteries for grid-scale electrochemical energy storage because of their low cost and environmental protection. Finding a suitable and economical cathode material, which is needed to achieve high energy density and long cycle stability, is one of the most important and arduous challenges at the present stage. Potassium manganese hexacyanoferrate (KMHCF) is a kind of Prussian blue analogue. It has the advantages of a large 3D frame structure that can accommodate the insertion/extraction of zinc ions, and is nontoxic, safe, and easy to prepare. However, regularly synthesized KMHCF has higher water and crystal defects, which reduce the possibility of zinc ions' insertion/extraction, and subsequently the discharge capacity and cycling stability. In this work, a KMHCF material with less water and low defects was obtained by adding polyvinylpyrrolidone during the synthesis process to control the reaction process. The KMHCF serves as the cathode of A-ZIBs and exhibits an excellent electrochemical performance providing a specific capacity of 140 mA h g–1 for the initial cycle at a current density of 100 mA g–1 (1 C). In particular, it can maintain a reversible capacity of 85 mA h g–1, even after 400 cycles at 1 C. Moreover, unlike the traditional zinc storage mechanism of A-ZIBs, we found that the KMHCF electrode undergoes a phase transition process when the KMHCF electrode was activated by a small current density, which is attributed to part of the Mn on the lattice site being replaced by Zn, thus forming a new stable phase to participate in the subsequent electrochemical reaction.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04129?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04129</a>.XRD patterns of KMHCF-80 and KMHCF-PVP-25; BET patterns of various KMHCF; cycling performance of KMHCF-PVP-80 electrode materials at 2 and 3 C; SEM and Nyquist patterns of various KMHCF electrodes after different cycles; charge and discharge curves and cycling performance at 1 C (first charge) of the KMHCF-PVP-80 electrode; CV curve of the KMHCF-PVP-80 electrode after the second cycle at a scan rate of 0.04 mV s–1; XRD comparison of the KMHCF-PVP-80 electrode after 230 cycles at 1 C; Raman patterns of the KMHCF-PVP-80 electrode sheets after different charge and discharge cycles; and elemental mapping images of KMHCF-PVP-80 electrodes after 230 cycles at 1 C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04129/suppl_file/am1c04129_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Heat‐Resistant Carbon‐Coated Potassium Magnesium Hexacyanoferrate Nanoplates for High‐Performance Potassium‐Ion Batteries

Cubic Manganese Potassium Hexacyanoferrate Regulated by Controlling of the Water and Defects as a High-Capacity and Stable Cathode Material for Rechargeable Aqueous Zinc-Ion Batteries

Nitrogen-Rich Hard Carbon As A Highly Durable Anode for High-Power Potassium-Ion Batteries

Defect-free potassium manganese hexacyanoferrate cathode material for high-performance potassium-ion batteries

Regulating the thermostability of metal hexacyanoferrates for highly-efficient alkali metal ion storage

Ultra-fast and high-stable near-pseudocapacitance intercalation cathode for aqueous potassium-ion storage

Surface Lattice Modulation Stabilizes K2Mn[Fe(CN)6] Cathode for High‐Energy K‐Ion Batteries

In Situ Fe‐Substituted Hexacyanoferrate for High‐Performance Aqueous Potassium Ion Batteries

Robust carbon nanotube-interwoven KFeSO4F microspheres as reliable potassium cathodes

3D Ordered Macroporous Metal-organic-frameworks (MOFs) Single Crystals Derived Nitrogen-doped Hierarchical Porous Carbon for High Performance Potassium-ion Batteries.

Potassium‐Rich Iron Hexacyanoferrate/Carbon Cloth Electrode for Flexible and Wearable Potassium‐Ion Batteries

Conductive Co-Based Metal Organic Framework Nanostructures for Excellent Potassium- and Lithium-Ion Storage: Kinetics and Mechanism Studies

Molecular structure regulation of FCCs enabling N/S co-doped hollow amorphous carbon with enlarged interlayer spacing and rich defects for superior potassium storage

Anchoring Π‐D Conjugated Metal‐Organic Frameworks with Dual‐Active Centers on Carbon Nanotubes for Advanced Potassium‐Ion Batteries

Two‐electron redox chemistry enables potassium‐free copper hexacyanoferrate as high‐capacity cathode for aqueous Mg‐ion battery

Synergistic coupling of amorphous carbon and graphitic domains toward high-rate and long-life K+ storage

Phosphorus/nitrogen co-doped hollow carbon fibers enabling high-rate potassium storage

Ultrafine manganese hexacyanoferrate with low defects regulated by potassium polyacrylate for high-performance aqueous Zn-ion batteries

Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density

Layered double hydroxides as high-performance anode material for potassium ion battery

Carbon Coated MoS2 Hierarchical Microspheres Enabling Fast and Durable Potassium Ion Storage