Abstract:Author(s): Alvarado, Judith Elizabeth | Advisor(s): Meng, Ying Shirley | Abstract: The current commercial lithium ion battery utilizes “host-guest” electrodes that allow for the intercalation of lithium between the crystal lattice of the anode and cathode materials. The lithium ions are transported through the electrolyte medium during the charge/discharge process, Given their success, lithium ion batteries have now penetrated the electric vehicle market and large scale grid storage, which require batteries with much higher energy densities. To meet this demand, alternative anode and cathode chemistries are required. Consequently, this will put high strain on the electrolyte which will decompose at both low and high potentials to form a passivation layer known as the solid electrolyte interphase (SEI). Herein, the fundamental reduction mechanism of fluoroethylene carbonate (FEC) is investigated as an additive for conventional electrolytes to improve the SEI formation on various silicon anodes using a series of advanced spectroscopic and microscopic techniques. For the first time, the direct visualization of the SEI generated on the silicon nanoparticle is investigated by scanning electron microscopy and its chemical composition by electron energy loss spectroscopy. The SEI is further investigated on lithium metal anode. Highly concentrated bisalt ether electrolytes form a SEI that is dominated by salt decomposition rather than solvent decomposition, which enables high lithium metal cycling efficiencies. At high potentials the electrolyte oxidizes on the cathode to form the cathode electrolyte interphase (CEI). With the discovery of 5V cathode materials, a new electrolyte is required. Therefore, sulfone based electrolytes are studied as potential high voltage electrolyte. Combined with lithium bis(fluorosulfonyl) imide, this solvent-salt synergy addresses the traditional performance issues that develop at the interface of high voltage cathodes. The factors that affect the cycling performance of cathode materials for lithium ion batteries are also seen in sodium ion batteries. Atomic layer deposition (ALD) is widely used to improve the cycling performance, coulombic efficiency of batteries, and to maintain electrode integrity for LIBs. Therefore, this approach is used to understand the effect of Al2O3 ALD coating on P2-Na2/3Ni1/3Mn2/3O2 cathodes, which lowers the cathode impedance and improves particle morphology after cycling. Improving the electrode-electrolyte interface is critical to the development of next generation high density energy storage systems.

Understanding Fluoroethylene Carbonate and Vinylene Carbonate Based Electrolytes for Si Anodes in Lithium Ion Batteries with NMR Spectroscopy

Identifying the Structural Basis for the Increased Stability of the Solid Electrolyte Interphase Formed on Silicon with the Additive Fluoroethylene Carbonate

Solid–Electrolyte Interface Formation on Si Nanowires in Li-Ion Batteries: The Impact of Electrolyte Additives

Understanding the Roles of Electrolyte Additives on the Surface Modification Mechanism of Silicon-Based Anodes in Lithium-Ion Batteries

Identification of the Solid Electrolyte Interface on the Si/C Composite Anode with FEC as the Additive

Effect Of Fluoroethylene Carbonate On Solid Electrolyte Interphase Formation Of The Sio/C Anode Observed By In Situ Atomic Force Microscopy

SEI Formation and Interfacial Stability of a Si Electrode in a LiTDI-Salt Based Electrolyte with FEC and VC Additives for Li-Ion Batteries

SEI-component formation on sub 5 nm sized silicon nanoparticles in Li-ion batteries: the role of electrode preparation, FEC addition and binders

Improved Performance of the Silicon Anode for Li-Ion Batteries: Understanding the Surface Modification Mechanism of Fluoroethylene Carbonate As an Effective Electrolyte Additive

Molecular-Cling-Effect of Fluoroethylene Carbonate Characterized via Ethoxy(pentafluoro)cyclotriphosphazene on SiOx/C Anode Materials - A New Perspective for Formerly Sub-Sufficient SEI Forming Additive Compounds

Unraveling Morphology and Chemistry Dynamics in Fluoroethylene Carbonate Generated Silicon Anode Solid Electrolyte Interphase Across Delithiated and Lithiated States: Relative Cycling Stability Enabled by an Elastomeric Polymer Matrix

Composition and Structure of the solid electrolyte interphase on Na-Ion Anodes Revealed by Exo- and Endogenous Dynamic Nuclear Polarization─NMR Spectroscopy

Investigating and Optimizing Interfacial Properties of Electrode Materials for Lithium-ion and Sodium-ion Batteries

Nano-FTIR Spectroscopy of the Solid Electrolyte Interphase Layer on a Thin-Film Silicon Li-Ion Anode

AFM Investigation of Solid Electrolyte Interphase on HOPG Anode in Sodium Ion Battery

Understanding Solid Electrolyte Interphase (SEI) Species at the Electrode-Electrolyte Interface in Liquid Lithium Metal Batteries Via in-Situ Fourier Transform Infrared (FTIR) Spectroscopy

Enhanced overall electrochemical performance of silicon/carbon anode for lithium-ion batteries using fluoroethylene carbonate as an electrolyte additive

Engineering Solid Electrolyte Interphase Composition by Assessing Decomposition Pathways of Fluorinated Organic Solvents in Lithium Metal Batteries

An Inorganic‐Rich Solid Electrolyte Interphase for Advanced Lithium‐Metal Batteries in Carbonate Electrolytes

Modeling Electrochemical Decomposition of Fluoroethylene Carbonate on Silicon Anode Surfaces in Lithium Ion Batteries

Influence of Carbonate Solvents on Solid Electrolyte Interphase Composition over Si Electrodes Monitored by In Situ and Ex Situ Spectroscopies