Abstract:It is necessary to correctly research and synthesize efficient and inexpensive catalysts to achieve reversible oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which is also a prerequisite for zinc–air batteries (ZABs). However, it is still a huge challenge to manufacture electrocatalysts with durable and high electrocatalytic performance from biomass. Here, a convenient method of delignification was used to transform natural balsa wood into a layered porous carbon material, FeCo alloy supported on a N, S-doped wood-based carbon aerogel () as the cathode in rechargeable flow ZAB. The obtained with the porous lamellar architecture exhibits superior bifunctional electrocatalysis, including excellent electrochemical activities and superior stabilities. For ORR, relative to the reversible hydrogen electrode, the onset potential of is 0.97 V, and the half-wave potential is 0.85 V, which is consistent with the potential of commercial Pt/C. For OER, obtained an overpotential of 450 mV, which is very similar to the overpotential of the benchmark RuO2. The superior performance could be owing to the alloy carrier interaction between the FeCo alloy and the wood-based carbon aerogel co-doped with N and S. Moreover, the bifunctional air cathode in a flow ZAB assembled with the catalyst at a current density of 10 mA cm–2; the power density is 140 mW cm–2, and the specific capacitance is 760 mA h gZn–1, with a remarkable long-term stability of 400 h better than ZAB of benchmark Pt/C + RuO2. This research lays the foundation for transforming abundant biomass resources into high environmental protection materials for energy-related applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10925.Comparison of longitudinal cross-sectional observation SEM images of natural wood and ; images of the materials synthesized in every step during the synthesis of ; SEM image of NS-CA synthesized without FeCo loading; XRD pattern of the wood carbon aerogel after pyrolysis; Raman spectra of various samples; configurations of N dopants of and N-CA; CV curves in Ar and O2-saturated 0.1 M KOH solution; polarization curves of , , Pt/C, and RuO2; polarization curves of , , NS-CA, Pt/C, and RuO2; polarization curves of , , , Pt/C, and RuO2; cyclic voltammograms of , N-CA, and CA at different scan rates; comparison of Egap values for our catalysts with those in the literature; summary of the catalytic performances of the reported electrocatalysts; TEM images of after long-time testing ORR and OER; XPS spectrum of Fe 2p and Co 2p for after long-time ORR and OER testing; comparison of transition-metal content before and after the long-term cycle test; EIS of the cathode; cyclic stability of the ZAB built with the catalyst at 10 mA cm–2; and voltage gap of the 1st cycle and the 1200th cycle of the zinc–air battery during charge–discharge (PDF)This article has not yet been cited by other publications.

Biomass-based carbon aerogels with interconnected pores and controllable Zn–N sites for CO 2 electroreduction

Biomass-based carbon aerogels prepared by ZnCl 2 -assisted pyrolysis of cellulosic aerogels for selective electrocatalytic CO 2 reduction

Three-dimension in-situ nitrogen doping porous cellulosic biomass-based carbon aerogel for electrocatalytic CO 2 reduction

Promoting Industrial-level CO 2 Electroreduction Kinetics via Accelerating Proton Feeding on a Metal-free Aerogel Electrocatalyst

Promoting Industrial-Level CO2 Electroreduction Kinetics Via Accelerating Proton Feeding on a Metal-Free Aerogel Electrocatalyst

Hierarchical Cross‐Linked Carbon Aerogels with Transition Metal‐Nitrogen Sites for Highly Efficient Industrial‐Level CO 2 Electroreduction

Cobalt-nitrogen-carbon Sites on Carbon Aerogels for Enhanced Electrocatalytic CO2 Activity

Hierarchical Cross‐Linked Carbon Aerogels with Transition Metal‐Nitrogen Sites for Highly Efficient Industrial‐Level CO2 Electroreduction

Fabrication of N and S co-doped lignin-based porous carbon aerogels loaded with FeCo alloys and their application to oxygen evolution and reduction reactions in Zn-air batteries

Optimizing Particle Morphology: Atomic Iron–nitrogen Centers with Graphitic‐n for Highly Efficient CO2 Electroreduction

Ni Hollow Fiber Encapsulated Bi@Zeolite for Efficient CO 2 Electroreduction

Monolithic Nitrogen-Doped Carbon Electrode with Hierarchical Porous Structure for Efficient Electrochemical CO2 Reduction

Chemical vapor deposition strategy for inserting atomic FeN 4 sites into 3D porous honeycomb carbon aerogels as oxygen reduction reaction catalysts in high-performance Zn-air batteries

CO2-Induced Fibrous Zn Catalyst Promotes Electrochemical Reduction of CO2 to CO

Hierachical Aerogel-Supported Cu-Sn-Ox Solid Solutions for Highly Selective CO2 Electroreduction and Zn-CO2 Batteries

Microporous Fe–N4 Cataysts Derived from Biomass Aerogel for a High-Performance Zn–air Battery

Fe nanoparticles embedded in N-doped porous carbon for enhanced electrocatalytic CO2 reduction and Zn-CO2 battery

Metal-Organic Frameworks-Derived FeS-Co9S8/NCA Porous Aerogel Electrocatalyst as a High-Performance Cathode for Zinc-Air Batteries

Wood-Derived Bimetallic and Heteroatomic Hierarchically Porous Carbon Aerogel for Rechargeable Flow Zn–Air Batteries

Improved oxygen reduction activity on biomass derived carbon catalysts via microbial fermentation pre-treatment and oxygen etching

In situ growth of Ag aerogels mediating effective electrocatalytic CO2 reduction and Zn-CO2 batteries