Abstract:Overhead lines are generally used for electrical energy transmission. Also, XLPE underground cable lines are generally used in the city center and the crowded areas to provide electrical safety, so high voltage underground cable lines are used together with overhead line in the transmission lines, and these lines are called as the mixed lines. The distance protection relays are used to determine the impedance based fault location according to the current and voltage magnitudes in the transmission lines. However, the fault location cannot be correctly detected in mixed transmission lines due to different characteristic impedance per unit length because the characteristic impedance of high voltage cable line is significantly different from overhead line. Thus, determinations of the fault section and location with the distance protection relays are difficult in the mixed transmission lines. In this study, 154 kV overhead transmission line and underground cable line are examined as the mixed transmission line for the distance protection relays. Phase to ground faults are created in the mixed transmission line, and overhead line section and underground cable section are simulated by using PSCAD. The short circuit fault images are generated in the distance protection relay for the overhead transmission line and underground cable transmission line faults. The images include the RX impedance diagram of the fault, and the RX impedance diagram have been detected by applying image processing steps. The regression methods are used for prediction of the fault location, and the results of image processing are used as the input parameters for the training process of the regression methods. The results of regression methods are compared to select the most suitable method at the end of this study for forecasting of the fault location in transmission lines.

Fault location scheme for combined overhead line with underground power cable

Intelligence Scheme for Fault Location in a Combined Overhead Transmission Line & Underground Cable

High Impedance Fault Detection and Location in Combined Overhead Line and Underground Cable Distribution Networks Equipped with Data Loggers

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

A Fault Location Algorithm for Multi-Section Combined Transmission Lines Considering Unsynchronized Sampling

Novel Fault Locating Method Based on Synchronized Voltage Phasor

Fault location of cable hybrid transmission lines based on energy attenuation characteristics of traveling waves

PMU-Based Fault Location Using Voltage Measurements in Large Transmission Networks

Transmission Line Fault Location Based on Improved Algorithm of Electromagnetic Time Reversal

Fault Location Estimation by Using Machine Learning Methods in Mixed Transmission Lines

A Hybrid Technique for Fault Classification and Location in a Jointed Overhead-Underground Distribution Line

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

Comparative Fault Location Estimation by Using Image Processing in Mixed Transmission Lines

A Novel Single-Ended Fault Location Method for Locating Double-Phase to Earth Faults

Fault classification using Artificial Neural Network in combined underground cable and overhead line

Fault Location Method for Three-Core Cable Using Amplitude Ratio of Shield-Grounding Wire Currents

Time-Domain Transmission Line Fault Location Method With Full Consideration of Distributed Parameters and Line Asymmetry

Fault Section Identification of the Power Cables in Urban Distribution Networks by Amplitude Differences Between the Zero-sequence Currents and Those Flowing in Cable Sheaths and Armors

Fuzzy Inference System Approach for Locating Series, Shunt, and Simultaneous Series-Shunt Faults in Double Circuit Transmission Lines

Fault Location Based on Synchronous Data of Both Ends in Non-effectively Grounded System