Abstract:A high-sensitivity interferometric optical microfiber sensor based on liquid cladding is proposed to detect liquid samples temperatures in special environments. The sensor is manufactured by arc discharge and flame-brushing technology and is encapsulated in a capillary tube and covered with deionized water. The sensor is more susceptible to the influence of the external environment due to the strong evanescent field on the tapered fiber surface. High-sensitivity measurement near room temperature is important, which can be used for effective diagnosis and treatment of local temperature of biological tissues in the field of biosensing. Compared with the silica material, the sensor based on liquid encapsulation has a larger thermo-optical coefficient, and the difference between the thermo-optic coefficient of water and the optical fiber is greater. The results show that with increasing ambient temperature, the wavelength of the transmission spectrum shifts towards shorter wavelengths. The device without liquid packaging has a temperature sensitivity of −57 pm/°C, and the liquid-encapsulated microfiber can reach −415 pm/°C ranging from 30-50 °C, which is 7<sup>+</sup> times higher than the former. In addition to improving the temperature sensitivity of the sensor, the water cladding can protect the microfiber from damage. This sensor can be used as a basic sensing unit in remote and intelligent optical fiber sensor networks with great application potential in marine environment monitoring, biomedicine diagnosis and chemical reaction research.

High-performance fiber sensor via Mach-Zehnder interferometer based on immersing exposed-core microstructure fiber in oriented liquid crystals

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement

Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

An Inline Ultrasensitive Temperature Sensor Based on Liquid-Filled Photonic Crystal Fiber Mach-Zehnder Modal Interferometer

High-sensitivity and Large-Range Fiber Optic Temperature Sensor Based on PDMS-coated Mach-Zehnder Interferometer Combined with FBG.

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

High sensitivity micro-fiber Mach-Zehnder interferometric temperature sensors with a high index ring layer

High-temperature Sensor Based on Suspended-Core Microstructured Optical Fiber

In-Line Interferometric Temperature Sensor Based on Dual-Core Fiber

High-Sensitivity Mach–Zehnder Interferometric Temperature Fiber Sensor Based on a Waist-Enlarged Fusion Bitaper

High temperature microstructured fiber sensor based on a partial-reflection-enabled intrinsic Fabry-Perot interferometer.

Tip-Packaged High-Temperature Fiber-Optic Sensor Based on Parallel Fabry–Perot Interferometers and the Vernier Effect

Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity

A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

An Anti-Jamming High-Temperature Sensor Based on Optical Fiber In-Line Mach–Zehnder Interferometer Structure

Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer

Highly sensitive liquid level and temperature sensors based on all-fiber intermodal interferometers

High temperature ( up to 950 ° C ) sensor based on 2 micro taper in-line fiber Mach-Zehnder 3 interferometer ( Invited ) 4