Abstract:Coarse aggregate is the main component of asphalt mixtures, and differences in its morphology directly impact road performance. The utilization of standard aggregates can benefit the standard design and performance improvement. In this study, 3D printing technology was adopted to prepare artificial aggregates with specific shapes for the purpose of making the properties of artificial aggregates to be similar to the properties of natural aggregates. Through a series of material experiments, the optimal cement-based material ratio for the preparation of high-strength artificial aggregates and corresponding manufacturing procedures have been determined. The performance of the artificial aggregates has been verified by comparing the physical and mechanical properties with those of natural aggregates. Results indicate that using 3D printing technology to generate the standard coarse aggregate is feasible, but its high cost in implementation cannot be ignored. The 3D shape of the artificial aggregate prepared by the grouting molding process has a good consistency with the natural aggregate, and the relative deviation of the overall macro-scale volume index of the artificial aggregate is within 4%. The average Los Angeles abrasion loss of artificial cement-based aggregate is 15.2%, which is higher than that of diabase aggregate, but significantly lower than that of granite aggregate and limestone aggregate. In a nutshell, 3D printed aggregates prepared using the optimized cement-based material ratio and corresponding manufacturing procedures have superior physical and mechanical performance, which provides technical support for the test standardization and engineering application of asphalt pavements.

A Review on the Application of 3D Printing Technology in Pavement Maintenance

Feasibility Analysis on the Application of 3D Printing Technology on Municipal Roads

A literature review: asphalt pavement repair technologies and materials

A Laboratory Prototype of Automatic Pavement Crack Sealing Based on a Modified 3D Printer

A comprehensive review of sustainable materials and toolpath optimization in 3D concrete printing

A Critical Review of the Use of 3-D Printing in the Construction Industry

3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials: A Review

Analysis of New Materials Application in Municipal Road Construction

Overview of the development of 3D-printing concrete: A review

Application Research on Intelligent Paving Construction Technology of Asphalt Pavement Based on 3D Mechanical Control

Space-filling and Print Path Generation Methods for Large-Area 3D Concrete Printing Pavements

Clustering of Asphalt Pavement Maintenance Sections Based on 3D Ground-Penetrating Radar and Principal Component Techniques

Preparation of Artificial Pavement Coarse Aggregate Using 3D Printing Technology

Application of Millimeter 3D Automatic Paving System in Highway Engineering Construction

A Review of the Current Progress and Application of 3D Printed Concrete

Review of Advances in 3D Printing Technology of Cementitious Materials: Key Printing Parameters and Properties Characterization

State-of-the-art of Mechanical Properties of 3D Printed Concrete

Research and Application Review of the Digital Construction Technology of 3 D Printing for Construction

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

The State-of-the-Art Review on Applications of Intrusive Sensing, Image Processing Techniques, and Machine Learning Methods in Pavement Monitoring and Analysis