Effect of ergonomic aspects on single‐ and multiproduct assembly‐line balancing problems

Mena Puthiyaveedu Giridhar,Vinay V. Panicker

DOI: https://doi.org/10.1002/hfm.21046

2024-06-16

Human Factors and Ergonomics in Manufacturing & Service Industries

Abstract:Human Factors and Ergonomics in Manufacturing &Service Industries, EarlyView.

ergonomics,engineering, manufacturing

What problem does this paper attempt to address?

Multi-objective collaborative assembly line design problem with the optimisation of ergonomics and economics

Mohammed-Amine Abdous,Xavier Delorme,Daria Battini,Sandrine Berger-Douce

DOI: https://doi.org/10.1080/00207543.2022.2153185

IF: 9.018

2022-12-30

International Journal of Production Research

Abstract:Manufacturing systems are socio-technical systems, with explicit interactions between humans and technologies in shared workspaces. These shared workspaces could also be called hybrid collaborative manufacturing systems, which involve workers as well as technological equipment and combine the benefits of human workers and new Industry 4.0 technologies, such systems are particularly useful in a context requiring flexibility and adaptability. Furthermore, the new Industry 5.0 approach has the objective to shift toward more human-centric and resilient manufacturing systems. The key problems to solve in the design of collaborative manufacturing systems are the combinatorial assembly line balancing problem and the equipment selection problem. An efficient and sustainable line requires a cost-effective choice of equipment while improving the ergonomics and the safety of workers. Both decisions of balancing workload and the assignment of equipment impact the ergonomics of a collaborative system and present conflicting criteria. To this end, we propose a multi-objective approach, the objectives are the optimisation of the investment costs and the ergonomics with a fatigue and recovery criterion. We propose to linearise the fatigue and recovery to formulate a new Mixed Integer Linear Programming formulation. We developed an exact multi-objective solving algorithm based on the ε -constraint to obtain the trade-off between these objectives. We conducted numerical experiments with different instances from the literature with promising results for instances with up to 45 operations. Finally, we discuss insightful managerial conclusions and future research perspectives.

engineering, manufacturing, industrial,operations research & management science
Computer‐Aided Ergonomic Analysis for Assembly Unit of an Agricultural Device

Mehmet Yosunlukaya,D. Gonen,A. Oral

DOI: https://doi.org/10.1002/hfm.20681

2016-09-01

Abstract:In many applications, those who work on assembly processes are required to work in nonergonomic stances. Incorrect positions may cause strain and persistent problems. In addition, strain in workers’ bodies also has a negative effect on labor productivity. Ergonomics should be applied to avoid this kind of negative impact on workers’ health as well as productivity. Ergonomics introduces the basic principles of system productivity and human‐machine‐environment relationship. With a series of computer‐aided ergonomics analysis (CAEA), necessary precautions can be taken in advance by determining the undesirable stances. Through CAEA, productivity for machinery and comfort for people can be ensured by creating an efficient working environment without causing health problems for workers who work in production. In this study, in an agricultural equipment producing company, current working positions of a worker carrying out tasks during the assembly of wheel hay rakes, have been evaluated via the CATIA Ergonomic Analysis Module. On the basis of the results, the design of the assembly unit was ergonomically improved. As a result of the improvement in the working environment, unfavorable stance positions were avoided and production time was decreased by 60%.

Engineering,Computer Science,Agricultural and Food Sciences
Ergonomic Design of an Adaptive Automation Assembly System

Marco Bortolini,Lucia Botti,Francesco Gabriele Galizia,Cristina Mora

DOI: https://doi.org/10.3390/machines11090898

IF: 2.899

2023-09-11

Machines

Abstract:Ergonomics is a key factor in the improvement of health and productivity in workplaces. Its use in improving the performance of a manufacturing process and its positive effects on productivity and human performance is drawing the attention of researchers and practitioners in the field of industrial engineering. This paper proposes an ergonomic design approach applied to an innovative prototype of an adaptive automation assembly system (A3S) equipped with Microsoft KinectTM for real-time adjustment. The system acquires the anthropometric measurements of the operator by means of the 3-D sensing device and changes its layout, arranging the mobile elements accordingly. The aim of this study was to adapt the assembly workstation to the operator dimensions, improving the ergonomics of the workstation and reducing the risks of negative effects on workers' health and safety. The case study of an assembly operation of a centrifugal electric pump is described to validate the proposed approach. The assembly operation was simulated at a traditional fixed workstation and at the A3S. The shoulder flexion angle during the assembly tasks at the A3S reduced between 18% and 47%. The ergonomic risk assessment confirmed the improvement of the ergonomic conditions and the ergonomic benefits of the A3S.

engineering, mechanical, electrical & electronic
From Manual Operation to Collaborative Robot Assembly: An Integrated Model of Productivity and Ergonomic Performance

Ya-Jun Zhang,Li Liu,Ningjian Huang,Robert Radwin,Jingshan Li

DOI: https://doi.org/10.1109/lra.2021.3052427

IF: 5.2

2021-04-01

IEEE Robotics and Automation Letters

Abstract:Manufacturing systems involve machines and people. Both productivity and ergonomic performance are of significant importance in manufacturing. However, there is no integrated model to analyze them simultaneously. To bridge this gap, a unified model is introduced to evaluate the productivity and ergonomic performance of both manual operations and collaborative robot assembly systems. Specifically, flow time is used to represent productivity measurement and strain index characterizes ergonomic performance. Models and solutions of both performance measures in manual operations and collaborative assembly processes are introduced. Then a unified model to integrate both metrics, throughput rate per unit of work effort time, is proposed. Finally, a cylinder head assembly example is introduced to illustrate the applicability of the model.

robotics
Model and heuristics for the multi-manned assembly line worker integration and balancing problem

Adalberto Sato Michels,Alysson M. Costa

DOI: https://doi.org/10.1080/00207543.2024.2347572

IF: 9.018

2024-05-11

International Journal of Production Research

Abstract:This paper examines the balancing of assembly lines with multi-manned stations and a heterogeneous workforce. Both topics received considerable attention in the literature, but not in an integrated fashion. Combining these two characteristics gives rise to a highly combinatorial Multi-manned Assembly Line Worker Integration and Balancing Problem. When considering multi-manned stations, the already coupled decisions on assigning tasks to heterogeneous workers and workers to stations must be further linked with task scheduling assessments. We propose a Mixed-Integer Linear Programming model and develop two heuristic solution procedures, which tackle the problem with a hierarchical decomposition approach. Computational tests on a large dataset indicate that the proposed method can obtain good primal bounds in short computational times. We demonstrate that these results can be applied to the monolithic model either as a warm start or in a proximity search procedure to obtain synergistic gains with statistically significant differences. From a managerial perspective, we show that multi-manned stations can reduce the assembly line's length even in the presence of a heterogeneous workforce, which is crucial for many industries manufacturing large-size products.

engineering, manufacturing, industrial,operations research & management science
Job rotation and human–robot collaboration for enhancing ergonomics in assembly lines by a genetic algorithm

Michela Dalle Mura,Gino Dini

DOI: https://doi.org/10.1007/s00170-021-08068-1

IF: 3.563

2021-10-06

The International Journal of Advanced Manufacturing Technology

Abstract:Abstract Currently, the largest percentage of the employed workforce in the manufacturing industry is involved in the assembly process, making ergonomics a key factor when dealing with assembly-related problems. During these processes, repetitive tasks and heavy component handling are frequent for workers, who may result overloaded from an energetic point of view, thus affecting several aspects not only relating to the human factor but also to potentially reduced productivity. Different organizational strategies and technological solutions could be adopted to overcome these drawbacks. For these purposes, the present paper proposes a genetic algorithm for solving the typical problem of assembly line balancing, taking into account job rotation and human–robot collaboration for enhancing ergonomics of workers. The objectives of the problem are related to both economic aspects and human factor: (i) the cost for implementing the assembly line is minimized, evaluated on the basis of the number of workers and differentiated by skill levels and on equipment installed on workstations, including collaborative robots, and (ii) the energy load variance among workers is also minimized, so as to smooth their energy expenditure in performing the assigned assembly operations, calculated according to their movements, physiological characteristics, job rotations and degree of collaboration with robots. The paper finally presents and discusses the application of the developed tool to an industrial assembly case.
Workers’ rest allowance and smoothing of the workload in assembly lines

Serena Finco,Daria Battini,Xavier Delorme,Alessandro Persona,Fabio Sgarbossa

DOI: https://doi.org/10.1080/00207543.2019.1616847

IF: 9.018

2019-05-20

International Journal of Production Research

Abstract:Ergonomic aspects have a crucial role in manual assembly systems. They impact on the workers' health, final product quality and productivity. For these reasons, there is the necessity to integrate them into the assembly line balancing phase as, whereas, only time and cost variables are considered. In this study, human energy expenditures are considered as ergonomic aspects and we integrate them, for the first time, into the assembly line balancing problem type 2 through the rest allowance evaluation. We consider as an objective function the minimization of the smoothness index. Firstly, a new optimal method based on mixed integer linear programming and a new linearization methodology are proposed. Then, a heuristic approach is introduced. To complete the study, a computational experimentation is presented to validate the mathematical model and to compare the methodologies proposed in terms of computational time, complexity and solution. Additionally, we provide a detailed analysis of the impact that rest allowance evaluation can have on productivity comparing the results obtained, taking into account the rest allowance integration before, during and after the assembly balancing process.

engineering, manufacturing, industrial,operations research & management science
Data-driven Analysis and Human-centric Assignment for Manual Assembly Production Lines

Goo-Young Kim,Jongpil Yun,Changha Lee,Junwoo Lim,Yongjin Kim,Sang Do Noh

DOI: https://doi.org/10.1016/j.cie.2024.109896

IF: 7.18

2024-01-12

Computers & Industrial Engineering

Abstract:Flow production-oriented assembly production lines have become crucial in various industries with the development of Industry 4.0, leading to mass customization and personalized production. In addition, Industry 5.0 has emerged, which emphasizes human-centric design. Manual assembly production line balancing, considering worker ergonomics, has also gained substantial attention. This study aims to solve the line balancing problem through combination optimization considering ergonomic risks based on many studies on human-centric production lines. A framework of the data-driven analysis and assignment for manual assembly production lines is proposed herein. The proposed framework defines and analyzes the process difficulty and the worker's process ability and assigns a skilled worker to a process through the presented heuristic algorithm. To demonstrate the applicability of the proposed framework, a case study was conducted on an experiment imitating a home appliance assembly line in the United States. This paper provides empirical evidence of a framework aimed at realizing human-centric business objectives through case study. Future studies on the data-driven analysis and assignment for manual assembly production lines are anticipated to exhibit a range of variations such as line balancing problems and evaluation methods.

computer science, interdisciplinary applications,engineering, industrial
Automated vision-based live ergonomics analysis in assembly operations

Jörg Krüger,The Duy Nguyen

DOI: https://doi.org/10.1016/j.cirp.2015.04.046

IF: 4.482

2015-01-01

CIRP Annals

Abstract:Manual analysis and optimisation of ergonomic parameters can be tedious when process and worker's body size variance is high. Automating this process would reduce workload and enable developing assistance systems for worker support. This paper presents a system which computes the positions of the parts of the body from input depth images and assesses ergonomics scores. The method is based on Particle Swarm Optimisation (PSO). By parallel processing on graphics hardware (GPU), the system is able to provide ergonomic feedback within a few seconds.

engineering, manufacturing, industrial
Including rest allowance in mixed-model assembly lines

Serena Finco,Martina Calzavara,Fabio Sgarbossa,Ilenia Zennaro

DOI: https://doi.org/10.1080/00207543.2020.1843731

IF: 9.018

2020-11-11

International Journal of Production Research

Abstract:Ergonomics has a significant impact on productivity and human safety in manual assembly lines. For this reason, several studies in recent years have proposed including ergonomics in assembly lines. However, most works are focused on simple assembly lines, while only a few studies exist for mixed-model assembly lines (MMALs). Thus, in this paper, we propose a new methodological approach to include physical fatigue and rest allowance (RA) as ergonomic parameters in MMAL problems. For the balancing problem, we propose a linear mathematical model that minimises the cycle time by including RA. For the sequencing decision, we develop a heuristic approach that assigns workers to workstations according to the workers' age and their related maximum physical capacity. Then, we propose a linear sequencing model that minimises the work-overload by also evaluating RA to assign each worker according to her or his features. Finally, to complete the study, we test the mathematical models in a real case application and provide a detailed discussion of the results to highlight the benefits we can achieve with this approach.

engineering, manufacturing, industrial,operations research & management science
Data-Driven Ergonomic Risk Assessment of Complex Hand-intensive Manufacturing Processes

Anand Krishnan,Xingjian Yang,Utsav Seth,Jonathan M. Jeyachandran,Jonathan Y. Ahn,Richard Gardner,Samuel F. Pedigo,Adriana,Blom-Schieber,Ashis G. Banerjee,Krithika Manohar

2024-03-06

Abstract:Hand-intensive manufacturing processes, such as composite layup and textile draping, require significant human dexterity to accommodate task complexity. These strenuous hand motions often lead to musculoskeletal disorders and rehabilitation surgeries. We develop a data-driven ergonomic risk assessment system with a special focus on hand and finger activity to better identify and address ergonomic issues related to hand-intensive manufacturing processes. The system comprises a multi-modal sensor testbed to collect and synchronize operator upper body pose, hand pose and applied forces; a Biometric Assessment of Complete Hand (BACH) formulation to measure high-fidelity hand and finger risks; and industry-standard risk scores associated with upper body posture, RULA, and hand activity, HAL. Our findings demonstrate that BACH captures injurious activity with a higher granularity in comparison to the existing metrics. Machine learning models are also used to automate RULA and HAL scoring, and generalize well to unseen participants. Our assessment system, therefore, provides ergonomic interpretability of the manufacturing processes studied, and could be used to mitigate risks through minor workplace optimization and posture corrections.

Human-Computer Interaction,Machine Learning
Ergonomic Design of Manual Assembly Workstation Using Digital Human Modeling

Puya Alipoor,Hadi Daneshmandi,Mohammad Fararuei,Zahra Zamanian

DOI: https://doi.org/10.5334/aogh.3256

IF: 3.64

2021-06-25

Annals of Global Health

Abstract:Background: Manual assembly workers are exposed to risk factors of musculoskeletal disorders. The most important risk factor among the workers is static and awkward posture. This study aimed to the ergonomic design of manual assembly workstation using Digital Human Modeling (DHM).Methods: This cross-sectional study was conducted among manual assembly workers. Data was gathered via 1) demographic/occupational questionnaire, 2) The Persian version of the Nordic General Questionnaire (P-NMQ), 3) Rapid Upper Limb Assessment (RULA) using Kinect sensor, 4) Hierarchical Task Analysis (HTA), 5) Idea Rating Sheet (IRS), 6) Anthropometric data of the participants, 7) CATIA software and RULA technique.Results: The results of the evaluations showed that in the design of most workstations of assemblers in Shiraz electronics industries, complete ergonomic principles were not observed, and the implementation of targeted ergonomic interventions in them is necessary.Conclusion: The prevalence of musculoskeletal symptoms is high among manual assembly workers. The RULA technique showed that the designed manual assembly workstation using DHM effectively could improve the subjects' awkward postures.

public, environmental & occupational health
Case studies of ergonomic interventions in automotive parts distribution operations

Sheryl S Ulin,W Monroe Keyserling

DOI: https://doi.org/10.1023/b:joor.0000047432.07837.64

Abstract:Ergonomic job analysis, intervention design, and intervention implementation are essential components of an ergonomics program designed to reduce worker exposure to risk factors associated with musculoskeletal disorders. As part of a 4-year study to reduce overexertion injuries in the service parts division of a major automaker, intervention case studies were identified that could be used at multiple facilities across the division. Interventions were developed and implemented. The three case studies include 1) self-elevating powered vehicle for transporting parts throughout the facility and for reaching to high bin locations; 2) lift and tilt pallet jacks for packing small parts into large bin-like containers; and 3) single-level telescoping conveyor used for delivering hand-held totes for subsequent sorting operations. Several analysis methods were used to assess worker exposure before and after intervention implementation (biomechanical analysis, posture analysis, worker interviews, and activity analysis). Following implementation, a decrease in exposure to risk factors for musculoskeletal disorders was documented. Worker interviews revealed acceptance and agreement that risk factors associated with the targeted tasks were reduced. Each case study includes a description of the implementation hurdles and can serve as both primary and secondary prevention of musculoskeletal disorders. Future work should document worker health and/or symptom changes as well as changes in risk factor exposure.
Ergonomic Simulation and Optimization During the Body Assembly

Yanjun Gao,Xianbo Wei,Beifang Ma,Yang Yu,Xingmin Wei,Fuquan Zhao

DOI: https://doi.org/10.1007/978-3-642-33738-3_41

2013-01-01

Abstract:The ergonomic simulation is significantly important to reduce the cost and shorten the product development cycle in the vehicle development. In this paper, the technological design and simulation validation are performed with regard to assembly process of subframe subsystem and body structure on a particular vehicle. During the simulation, the problems are found as follows: (1) There is interference between dolly front pillar and spreader bottom when the subframe subsystem is transported; (2) The blind area happens to an operator at the static operating posture. The assembly operation needs to be accomplished by means of human body. Furthermore, the operator’s neck and arms are subject to fatigue. When cyclic load is applied, fatigue usually appears on the operator’s body. The analysis results indicate that interference can be avoided by optimizing the spreader structure and relative position or adjusting the dolly front pillar by nearby operator when the dolly goes through the spreader. By modifying the location of installation points, an easy assembly can be completely achieved, and fatigue can be substantially eliminated as well.
Game theory-oriented approach for disassembly line worker assignment and balancing problem with multi-manned workstations

Yildiz Kose,Emre Cevikcan,Sinan Ertemel,Mirac Murat

DOI: https://doi.org/10.1016/j.cie.2023.109294

2023-05-12

Abstract:Multi-manned workstations, where a worker team synchronously executes different operations on the same product, have the potential to increase disassembly line performance. Despite focusing on main objectives such as workload imbalance and worker performance, existing disassembly line balancing studies have not addressed worker satisfaction. This study addresses the disassembly line worker assignment and balancing problem by considering not only multi-manned workstations with heterogeneous workers, but also workers' preference and performance. A novel multi-objective mixed integer linear programming model is formulated with the following objectives: minimizing the number of workers, the number of workstations, workload imbalance, maximizing worker satisfaction, and worker performance. Moreover, this study is proposing heuristics to utilize game theory-oriented approaches in the context of the addressed problem. Some comparative studies were carried out to compare the performance of the proposed heuristics. The effects of the factors were revealed by the statistical analysis conducted on the solutions for newly generated test problems. After the superiority of the proposed heuristics was indicated through comparative studies, they were applied to a washing machine disassembly system in the waste electrical and electronic equipment (WEEE) industry. The application indicated the performance improvement for the disassembly lead time (65%) and the space requirement (64%) compared to a classical disassembly system design.

computer science, interdisciplinary applications,engineering, industrial
Lean Manufacturing and Ergonomics Integration: Defining Productivity and Wellbeing Indicators in a Human–Robot Workstation

Ana Colim,Rita Morgado,Paula Carneiro,Nélson Costa,Carlos Faria,Nuno Sousa,Luís A. Rocha,Pedro Arezes

DOI: https://doi.org/10.3390/su13041931

IF: 3.9

2021-02-11

Sustainability

Abstract:Lean Manufacturing (LM), Ergonomics and Human Factors (E&HF), and Human–Robot Collaboration (HRC) are vibrant topics for researchers and companies. Among other emergent technologies, collaborative robotics is an innovative solution to reduce ergonomic concerns and improve manufacturing productivity. However, there is a lack of studies providing empirical evidence about the implementation of these technologies, with little or no consideration for E&HF. This study analyzes an industrial implementation of a collaborative robotic workstation for assembly tasks performed by workers with musculoskeletal complaints through a synergistic integration of E&HF and LM principles. We assessed the workstation before and after the implementation of robotic technology and measured different key performance indicators (e.g., production rate) through a time study and direct observation. We considered 40 postures adopted during the assembly tasks and applied three assessment methods: Rapid Upper Limb Assessment, Revised Strain Index, and Key Indicator Method. Furthermore, we conducted a questionnaire to collect more indicators of workers’ wellbeing. This multi-method approach demonstrated that the hybrid workstation achieved: (i) a reduction of production times; (ii) an improvement of ergonomic conditions; and (iii) an enhancement of workers’ wellbeing. This ergonomic lean study based on human-centered principles proved to be a valid and efficient method to implement and assess collaborative workstations, foreseeing the continuous improvement of the involved processes.

environmental sciences,environmental studies,green & sustainable science & technology
Ergonomic Embedded in Designing Welding Assembly Tool for Automotive Manufacturing Process

M.F. Hamizatun,S.A Haikal,N.M.Z. Nik Mohamed

DOI: https://doi.org/10.15282/jmmst.v7i2.9923

2023-11-30

Journal of Modern Manufacturing Systems and Technology

Abstract:Ergonomics focuses on understanding how workers interact with their work environment, tools, and equipment. The proper ergonomics consideration in tool design will impact worker safety and productivity. Ergonomics-embedded knowledge is critical in designing welding assembly tools for automotive manufacturing. The study aims to improve the ergonomic issues faced by the automotive assembly welders. The methodology involves studying the existing welding assembly process in automotive manufacturing regarding RULA scores and simulating the postures using CATIA analysis. Based on the simulation, critical ergonomics issues should be identified and analyzed. Finally, the welding process is improved by designing the hand support for the workers to assemble parts. The results revealed that the RULA scores have improved from 7 (high risk at the existing condition) to 3 (medium risk) for both worker's hands after the support of the assembly tool. In conclusion, ergonomic embedding in welding assembly tool design has improved the automotive assembly worker's well-being. The findings of this study contribute to the growing body of knowledge on integrating ergonomics into automotive manufacturing processes, providing valuable insights for industry practitioners and researchers alike.
Ergonomic Risk Identification for Spacesuit Movements Using Factorial Analysis

Linh Q Vu,K Han Kim,Sudhakar L Rajulu

Abstract:OCCUPATIONAL APPLICATIONSBiomechanical risk factors associated with spacesuit manual material handling tasks were evaluated using the singular value decomposition (SVD) technique. SVD analysis decomposed each lifting tasks into primitive motion patterns called eigenposture progression (EP) that contributed to the overall task. Biomechanical metrics, such as total joint displacement, were calculated for each EP. The first EP (a simultaneous knee, hip, and waist movement) had greater biomechanical demands than other EPs. Thus, tasks such as lifting from the floor were identified as "riskier" by having a greater composition of the first EP. The results of this work can be used to improve a task as well as spacesuit design by minimizing riskier movement patterns as shown in this case study. This methodology can be applied in civilian occupational settings to analyze open-ended tasks (e.g., complex product assembly and construction) for ergonomics assessments. Using this method, worker task strategies can be evaluated quantitatively, compared, and redesigned when necessary.
Bi-objective optimization-based multi-criteria decision-making framework for disassembly line balancing and employee assignment problem

Nurcan Deniz,Feristah Ozcelik

DOI: https://doi.org/10.1108/k-06-2022-0857

IF: 2.352

2022-12-31

Kybernetes

Abstract:Purpose Although disassembly balancing lines has been studied for over two decades, there is a gap in the robotic disassembly. Moreover, combination of problem with heterogeneous employee assignment is also lacking. The hazard related with the tasks performed on disassembly lines on workers can be reduced by the use of robots or collaborative robots (cobots) instead of workers. This situation causes an increase in costs. The purpose of the study is to propose a novel version of the problem and to solve this bi-objective (minimizing cost and minimizing hazard simultaneously) problem. Design/methodology/approach The epsilon constraint method was used to solve the bi-objective model. Entropy-based Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and Preference Ranking Organization methods for Enrichment Evaluation (PROMETHEE) methods were used to support the decision-maker. In addition, a new criterion called automation rate was proposed. The effects of factors were investigated with full factor experiment design. Findings The effects of all factors were found statistically significant on the solution time. The combined effect of the number of tasks and number of workers was also found to be statistically significant. Originality/value In this study, for the first time in the literature, a disassembly line balancing and employee assignment model was proposed in the presence of heterogeneous workers, robots and cobots to simultaneously minimize the hazard to the worker and cost.

computer science, cybernetics
A holistic methodology for mitigating awkward postural risks: Evidence from South Indian small-scale industries

Vigneswaran Chidambaram,Madhan Mohan Gopalsamy,Brajesh Kumar Kanchan,Senthilkumar Mouleeswaran

DOI: https://doi.org/10.3233/WOR-230210

Work

Abstract:Background: Small-scale industries (SSI) are the global economy's backbone since most industrial workers are connected. Most of these workers are contractual and temporary without appropriate training. Also, the SSI does not have a standard workplace with an appropriate layout and infrastructure, as they manage with minimum resources. Therefore, the work hazards, i.e., musculoskeletal disorders and fatigue, often go unnoticed as holistic postural risk methodology is still scarce for identifying the awkward postures in SSI. Objective: The present study proposes a novel holistic methodology to track and mitigate awkward postural risks in human-physical activities in SSI. To determine the effectiveness of the proposed methodology, a case study is presented in the South Indian Pump industry, wherein a critical workstation with a complex ergonomic work environment is employed. Methods: An ergonomic evaluation was conducted empirically and numerically in the workplaces using Digital Human Models. In numerical evaluation, three virtual workspaces have been created to redesign the identified crucial workstation, focusing on ergonomics and workflow. Results: The results obtained from the case study are encouraging for to use of the novel methodology in SSI. The case study reports that the proposed design significantly reduced the REBA score and WISHA lifting index by 6 and 1.20, respectively, without significant investment. Conclusion: The proposed methodology could encourage research to identify awkward posture in SSI.

Effect of ergonomic aspects on single‐ and multiproduct assembly‐line balancing problems

Multi-objective collaborative assembly line design problem with the optimisation of ergonomics and economics

Computer‐Aided Ergonomic Analysis for Assembly Unit of an Agricultural Device

Ergonomic Design of an Adaptive Automation Assembly System

From Manual Operation to Collaborative Robot Assembly: An Integrated Model of Productivity and Ergonomic Performance

Model and heuristics for the multi-manned assembly line worker integration and balancing problem

Job rotation and human–robot collaboration for enhancing ergonomics in assembly lines by a genetic algorithm

Workers’ rest allowance and smoothing of the workload in assembly lines

Data-driven Analysis and Human-centric Assignment for Manual Assembly Production Lines

Automated vision-based live ergonomics analysis in assembly operations

Including rest allowance in mixed-model assembly lines

Data-Driven Ergonomic Risk Assessment of Complex Hand-intensive Manufacturing Processes

Ergonomic Design of Manual Assembly Workstation Using Digital Human Modeling

Case studies of ergonomic interventions in automotive parts distribution operations

Ergonomic Simulation and Optimization During the Body Assembly

Game theory-oriented approach for disassembly line worker assignment and balancing problem with multi-manned workstations

Lean Manufacturing and Ergonomics Integration: Defining Productivity and Wellbeing Indicators in a Human–Robot Workstation

Ergonomic Embedded in Designing Welding Assembly Tool for Automotive Manufacturing Process

Ergonomic Risk Identification for Spacesuit Movements Using Factorial Analysis

Bi-objective optimization-based multi-criteria decision-making framework for disassembly line balancing and employee assignment problem

A holistic methodology for mitigating awkward postural risks: Evidence from South Indian small-scale industries