Abstract:Structural materials in fast reactors with harsh radiation environments due to high energy neutrons—compared to thermal reactors—potentially suffer from a higher degree of radiation damage. This radiation damage can change the thermophysical and mechanical properties of materials and, as a result, alter their performance and effective lifetime, in some cases leading to their disintegration. These phenomena can jeopardize the safety of fast reactors and thus need to be investigated. In this study, the effect of radiation damage on the vessels of molten salt fast reactors (MSFR) was evaluated based on two fundamental radiation damage parameters: displacement per atom (dpa) and primary knock-on atom (pka). Following the previous part of this article (Parts 1 and 2), an iMAGINE reactor core design (University of Liverpool, UK—chloride-based salt fuel system) and an EVOL reactor core design (CNRS, Grenoble, France, fluoride-based salt fuel system) with stainless steel and nickel-based alloy material vessels, respectively, were considered as case studies. The SPECTER and SPECTRA-PKA codes and a PTRAC card of MCNPX, integrated with a module which has been developed in MATLAB, named PTRIM and SRIM-2013 (using binary collision approximation), were employed individually to calculate and compare dpa and PKA (this master module containing all three tools has been appended to the iMAGINE-3BIC package for future use during reactor operations). Additionally, SRIM-2013 was applied in a 3D simulation of a radiation damage map on a small sample of vessels based on the calculated PKA. Our results showed a higher degree of radiation damage in the iMAGINE vessel compared to the EVOL one, which could be expected due to the harder neutron flux spectrum of the iMAGINE core compared to EVOL. In addition, the nickel alloy vessel showed better radiation damage resistance against high energy neutrons compared to the stainless steel one, although more investigations are required on thermal neutrons and alloy corrosion mechanisms to determine the best material for use in MSFR vessels.

Radiation effect assessment on spent fuel transport CASK by aircraft sabotage attack

Sensitivity of the neutron multiplication factor to water ingress into a spent fuel cask

Impact Analysis of a Commercial Airplane Over a Nuclear Spent Fuel Dry Storage Cask

Study on the Impact Limiter Design in Spent Fuel Transfer Cask in Nuclear Power Plants

Radiobiological Impact Evaluation Within Monte-Carlo Shielding Calculations of CANDU Spent Fuel

Modelling of radiation field around spent fuel container

Effect of material properties of impact limiter steel on drop accident of spent nuclear fuel transport cask

Thermal Analysis on NAC-STC Spent Fuel Transport Cask under Different Transport Conditions

Assessing the release, transport, and retention of radioactive aerosols from hypothetical breaches in spent fuel storage canisters

Study on the most severe condition for structural assessment of nuclear fuel transport package under impact loading

Design and dynamic analysis of transport cask for SMR fresh fuel assembly

Study on the Structural Evaluation and Optimization of Spent Nuclear Fuel Cask

An Integral Numerical Analysis of Impact of a Commercial Aircraft on Nuclear Containment

Comparative assessment of impact analysis methods applied to large commercial aircraft crash on reinforced concrete containment

Elaboration of Theoretical Methods for Assessment of Isolated and Combined Physical Damage Effects of Technogenic Accident While Transporting Radiological Materials by Multimodal Transport

Monte-Carlo Simulations of Radiation-Induced Activation in a Fast-Neutron and Gamma- Based Cargo Inspection System

On the Use of a Chloride or Fluoride Salt Fuel System in Advanced Molten Salt Reactors, Part 3; Radiation Damage

EFFICIENCY OF VARIOUS MATERIALS APPLICATION FOR RADIATION SHIELDING AT TRANSPORTATION AND STORAGE OF SPENT NUCLEAR FUEL BY DRY METHOD

Sub-modeling numerical analysis on the radionuclide release from a transport cask submerged in the deep sea

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Preliminary evaluation of aircraft impact on a near term nuclear power plant