Abstract:An integrated curing simulation methodology considering resin flow and compaction. Computational methods provide effective tools for the prediction of the curing behavior of composites, especially for large‐scale complex composite structures. The flow‐compaction analysis during curing receives insufficient attention in current studies. In this work, an integrated framework considering the heat transfer, the cross‐linking reaction, the flow and compaction, and the stress–strain module is established. A comprehensive resin flow termination criterion is proposed. L‐shaped composites with a stacking layer of [45/90/−45/0]s were fabricated, and the good agreement between the experimentally measured and the numerically predicted contour data validated the current model. Compared with Hubert's model, the prediction accuracy of the thickness and fiber volume content increases by 4.24% and 3.92%, respectively. Correlation analysis between the fiber volume ratio predicted by numerical methods and experimental results (94% for this method, −41% for Hubert's model) demonstrates the well‐capture of nonuniform fiber distribution in curved composites for the current strategy. The overall framework provides an accurate and promising tool for the prediction of the curing behavior of complex composite components. Highlights An integrated numerical methodology is proposed considering the resin flow and compaction. The viscosity‐temperature coupled feature of resin is considered in the permeability coefficients. A comprehensive resin flow termination criterion is proposed for an accurate prediction. The resin content, thickness, and spring‐in angle of L‐shaped laminates are characterized. The good correlation between the experimental and numerical results validates this method. Compared with the model proposed by Hubert, the prediction accuracy improves.

Modeling the thermophysical characteristics of polymer composites in the curing process

Numerical Simulation on Solvent Diffusion during Polymeric Coating Curing Processes

A piecewise kinetic model consistent with curing cycle of epoxy/amine composite

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

Simulation and Modeling of Polymeric Composite Temperature Change During Manufactory Process

Characterization and Finite Element Modeling for Thermoset Resin of Carbon Fiber Prepregs During Curing

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture

A cooperative relaxation model with two physical parameters for investigating the temperature and cure dependence of relaxation mechanisms in resins

Characterization and modeling of the polymerization-dependent moisture absorption behavior of an epoxy-carbon fiber-reinforced composite material

Building of Cure Kinetic Model in Modified Bismeleimide Resin During Curing Process

Research Progress in Numerical Simulation of Fiber Reinforced Thermosetting Resin Matrix Composites Molding Process

Modeling of curing and post-curing kinetics for a thermoset adhesive

Numerical modeling for curing of unidirectional carbon fiber reinforced polymer based on micromechanics in Laplace domain

Study the curing process of composite by numerical model

Development of a Cure Model for Unsaturated Polyester Resin Systems Based on Processing Conditions

The behavior of thermosetting compounds in injection molding cavities

Viscosity‐coupled curing simulation model for L‐shaped composites considering flow and compaction

Study on the Curing of Vinyl Ester Resin Composites

A Numerical Model to Predict the Relaxation Phenomena in Thermoset Polymers and Their Effects on Residual Stress during Curing—Part I: A Theoretical Formulation and Numerical Evaluation of Relaxation Phenomena

Computational modeling of micro curing residual stress evolution and out-of-plane tensile damage behavior in fiber-reinforced composites

Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling