Abstract:Rechargeable lithium-ion batteries (LIBs) have been increasingly popular in recent years in response to the growing need for large-scale energy storage applications and systems. However, due to the scarcity of lithium resources and their unequal distribution in the earth's crust, the present energy crisis has encouraged research into producing greener and more sustainable alternatives. Due to the relatively high abundance of sodium compared to lithium, sodium-ion batteries (SIBs) raise hope as an alternative and more sustainable chemistry.[1] Unfortunately, it is typically found that anode materials for LIBs are not suited for SIBs. Graphite, which is frequently used as an anode material in commercial LIBs, is incapable of achieving efficient Na + insertion/extraction due to a lack of interlayer spacing (Na + has a radius 39% bigger than Li + ) and high energy involved in the formation of Na-C bonds..[2] So, to develop mechanically flexible electrode materials that combine high electrochemical performance with low-cost is still a challenge for its applications in a world subjected to severe shortage of resources and various environmental issues. The problem can be solved by selecting "green" and economically viable precursors and synthesis procedures. Carbon nanofibers derived from renewable biomass materials exhibit great potential as electrode materials with obvious cost and environmental benefits. Lignin, a heterogeneous and amorphous polymer found in many plants, and it is estimated that annual natural lignin production is 5-36×10 8 tons, of which more than 70 million tons are commercialized mainly from the paper industry as a by-product, is a possible choice as the precursor for carbon nanofibers due to its low cost and bio-renewable nature. In this work, mechanically flexible and 3D interconnected lignin/polylactic acid (PLA) carbon nanofibers with different amounts of lignin were prepared by electrospinning, then stabilized and carbonized. The obtained carbon nanofibers were characterized by scanning electron microscopy and transmission electron microscopy to investigate their morphology. To determine the carbon yield thermogravimetric analysis has been performed. Surface area, pore radius and volume values were obtained by performing BET analysis from N 2 sorption isotherms. The obtained carbon nanofibers were tested as anode materiasl in 1 mol/L NaCF 3 SO 3 in diethylene glycol dimethyl ether (DEGDME) electrolyte. Results show that lignin derived carbon nanofibers deliver a high reversible capacity of 330 mAhg -1 at the current density of 100 mAg -1 in the first cycle. Additionally, these carbon nanofibers showed excellent cycling and high-rate performance and maintained a capacity of up to 200 mAhg -1 for over 200 cycles. It is therefore, demonstrated that lignin derived carbon nanofibers prepared under appropriate conditions are promising anode material candidates for sodium-ion batteries. References: [1] L. Yue, H. Zhao, Z. Wu, J. Liang, S. Lu, G. Chen, S. Gao, B. Zhong, X. Guo, X. Sun, Recent advances in electrospun one-dimensional carbon nanofiber structures/heterostructures as anode materials for sodium ion batteries, Journal of Materials Chemistry A, 8 (2020) 11493-11510. [2] M. Zhu, X. Kong, H. Yang, T. Zhu, S. Liang, A. Pan, One-dimensional coaxial Sb and carbon fibers with enhanced electrochemical performance for sodium-ion batteries, Applied Surface Science, 428 (2018) 448-454.

Lignin-Derived Mesoporous Carbon for Sodium-Ion Batteries: Block Copolymer Soft Templating and Carbon Microstructure Analysis

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

Sustainable Lignin-Based 3D Porous Carbon Nanofibers As a Na-Ion Battery Anode

From Dispersed Microspheres to Interconnected Nanospheres: Carbon-Sandwiched Mono Layered Mos2 As High-Performance Anode of Li-Ion Batteries

Sodium‐Ion Batteries: Hard–Soft Carbon Composite Anodes with Synergistic Sodium Storage Performance (adv. Funct. Mater. 24/2019)

Nitrogen-doped Hierarchically Porous Carbon Networks: Synthesis and Applications in Lithium-Ion Battery, Sodium-Ion Battery and Zinc-Air Battery

Lignin-Based Mesoporous Hollow Carbon @ MnO2 Nanosphere Composite as an Anodic Material for Lithium-Ion Batteries

Engineering Block Copolymer-Derived Porous Carbon Nanofibers as Anodes for Sodium Ion Batteries

Electrospun Kraft Lignin/Cellulose Acetate-Derived Nanocarbon Network As an Anode for High-Performance Sodium-Ion Batteries.

Hierarchical Interconnected Expanded Graphitic Ribbons Embedded with Amorphous Carbon: An Advanced Carbon Nanostructure for Superior Lithium and Sodium Storage.

Lignin-Based Mesoporous Hollow Carbon<i>@</i>MnO<sub>2</sub> Nanosphere Composite as an Anodic Material for Lithium-Ion Batteries

Optimizing Synthesis Temperature for Lignin-Derived Hard Carbon Anode for High Cycling Capacity in Sodium-Ion Batteries

Ion-Catalyzed Synthesis of Microporous Hard Carbon Embedded with Expanded Nanographite for Enhanced Lithium/Sodium Storage

Mesoporous Carbon with Large Pores As Anode for Na-ion Batteries

A Lignosulfonate Binder for Hard Carbon Anodes in Sodium-Ion Batteries: A Comparative Study

Facile Synthesis of Three-Dimensional Porous Interconnected Carbon Matrix Embedded with Sb Nanoparticles As Superior Anode for Na-ion Batteries

Biomass Alginate Derived Oxygen-Enriched Carbonaceous Materials with Partially Graphitic Nanolayers for High Performance Anodes in Lithium-Ion Batteries

Versatile Synthesis of Hollow‐structured Mesoporous Carbons by Enhanced Surface Interaction for High‐performance Lithium‐ion Batteries

A Novel Design Strategy Of A Practical Carbon Anode Material From A Single Lignin-Based Surfactant Source For Sodium-Ion Batteries

Nitrogen-Doped Carbon for Sodium-Ion Battery Anode by Self-Etching and Graphitization of Bimetallic MOF-Based Composite