Abstract:The intercalation/deintercalation of Na+ in the hard carbon (HC) has been widely investigated for the construction of high performances sodium-ion batteries (SIBs). In this work, a variety of sulfur-doped HCs were obtained by simple pyrolysis of the sublimated sulfur and the camphor tree (S-Cmph) derived material. When used as anode for SIBs, the S-Cmph-700 (pyrolyzed at 700°C) delivered a capacity of 616.7 mAh/g with an ICE of 66.61 %, high than that of the untreated material pyrolyzed at 1500°C (50.11 %) (Cmph-1500). Furthermore, excellent rate performance with specific capacities of 372.3, 323, 282.6, 252.6, 221, 181.2 mAh/g at 40, 80, 200, 400, 800 and 2000 mA g−1 can be achieved, respectively. When the current density returned at 40 mA g−1, the anode recovered a specific capacity of 356.8 mAh/g. In addition, the as-acquired anode material exhibited good cycling performance with a reversible capacity of 145.6 mAh/g over 500 cycles at 2000 mA g−1. The improved electrochemical performances of Cmph-HC anode can be attributed to the benefit of the S-doping, leading to the increase of the interlayer spacing of the anode material, which facilitates the intercalation/deintercalation of Na+ ions in the interlayer spacing of the HC material, and provided more active sites in the Cmph-HC anode for the Na+ ions storage. In addition, sulfur can reversibly react with Na+, limiting the irreversible consumption of Na+ and increase the intercalation rate of Na+ inside the anode material. This work presents a low cost, simple and effective way to synthesize a high performances anode material for the commercialization of SIBs.

A Novel Design Strategy Of A Practical Carbon Anode Material From A Single Lignin-Based Surfactant Source For Sodium-Ion Batteries

Litchi-structural Core–shell Si@C for High-Performance Lithium–ion Battery Anodes

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Lignin‐Derived Functional Carbon Framework for Homogeneous Sodium Deposition

Synthesis strategies and obstacles of lignocellulose-derived hard carbon anodes for sodium-ion batteries

Sustainable Fabrication of a Practical Hard Carbon Anode for a Sodium-Ion Battery with Unprecedented Long Cycle Life

High-yield Humic Acid-Based Hard Carbons As Promising Anode Materials for Sodium-Ion Batteries

Rational design of carbon skeleton interfaces for highly reversible sodium metal battery anodes

A Soft Carbon Materials with Engineered Composition and Microstructure for Sodium Battery Anodes

Hydrothermal Synthesis of Lignin-Based Carbon Microspheres as Anode Material for Lithium-Ion Batteries

Lignin-Based Mesoporous Hollow Carbon @ MnO2 Nanosphere Composite as an Anodic Material for Lithium-Ion Batteries

Sustainable, Inexpensive, Naturally Multi-Functionalized Biomass Carbon for Both Li Metal Anode and Sulfur Cathode

Controllable Synthesis of Hollow Si Anode for Long‐Cycle‐Life Lithium‐Ion Batteries

Design advanced carbon materials from lignin-based interpenetrating polymer networks for high performance sodium-ion batteries

Crystallization-induced formation of two-dimensional carbon nanosheets derived from sodium lignosulfonate for fast lithium storage

Lignin-Based Mesoporous Hollow Carbon<i>@</i>MnO<sub>2</sub> Nanosphere Composite as an Anodic Material for Lithium-Ion Batteries

A Lignosulfonate Binder for Hard Carbon Anodes in Sodium-Ion Batteries: A Comparative Study

Promising Nano-Silicon Anodes Prepared Using the "Disperse-Anchor" Strategy and Functional Carbon Nanotube Interlayers for Flexible Lithium-Ion Batteries

Sulfur-doping biomass based hard carbon as high performance anode material for sodium-ion batteries

Spongy-like N, S-codoped ultrathin layered carbon assembly for realizing high performance sodium-ion batteries