Xiang Zhang Haochen Li Rongbo Li Chunyi Kan Xia Dong Qian Xing Zefan Wang a School of Light industry Science and Engineering,Beijing Technology and Business University,Beijing,PR Chinab Petrochina Petrochem Res Inst,Synthet Resin Inst,Beijing,PR Chinac CAS Key Laboratory of Engineering Plastics,Beijing National Laboratory for Molecular Sciences,Institute of Chemistry,Chinese Academy of Sciences,Beijing,PR Chinad University of Chinese Academy of Sciences,Beijing,PR Chinae School of Chemistry and Environmental Engineering,Shenzhen University,Shenzhen,ChinaXiang Zhang is a graduate student in Beijing Technology and Business University. His field of research includes reinforced biodegradable polymers.Haochen Li is a graduate student in Beijing Technology and Business University. His field of research includes structure and property relationship study of biodegradable polymers.Rongbo Li is a senior engineer in Department of Polyolefin Science & Technology,PetroChina Petrochemical Research Institute. He received his Ph.D. degrees from University of Chinese Academy of Sciences in 2010. His research interests include polymers and polymer composites.Chunyi Kan is an undergraduate graduated from Beijing Technology and Business University. Her field of research includes modification of biodegradable polymers.Xia Dong is a professor in Institute of Chemistry,Chinese Academy of Sciences. She received her Ph.D. degrees from Dong Hua University in 2001. His field of research includes microstructure control and performance enhancement of polymeric materials.Qian Xing is an associate professor in Beijing Technology and Business University. She received her Ph.D. degrees from University of Chinese Academy of Sciences in 2013. Her field of research includes performance enhancement of biodegradable polymers and the relationship between polymer structure and properties.Zefan Wang is a professor in Shenzhen University. He received her Ph.D. degrees from University of Chinese Academy of Sciences in 2018. His field of research includes structure and property relationships of polymers.

Abstract:The widespread application of polylactide (PLA) has been limited by its slow crystallization rate and poor toughness. In the present work, a low molecular weight nucleator, TMC 301, and polyamide elastomer (PAE) were incorporated into PLA through melt blending to mediate both the crystallization capability and impact toughness. It was found that the introduction of TMC 301 decreased the crystallization temperature of PLA during the cooling process, while enhancing its cold crystallization capacity of PLA in the heating scan. Accordingly, the presence of TMC 301 shortened the half-crystallization time of PLA at 95°C in the ternary blends with minimal influence on the Avrami index. Moreover, the dispersion size of PAE decreased when the concentration of TMC 301 increased to 0.3 wt%, leading to a substantial increase in the tensile toughness and the impact strength of the PLA/PAE/TMC 301 blend. It is suggested that the size of the elastomer particles is a critical factor influencing the toughening efficiency of TMC301 in PLA/PAE blends. The nucleator TMC 301 and polyamide elastomer (PAE) were incorporated into PLA through melt blending to enhance both crystallization capability and toughness. The phase structure, crystallization behavior and the mechanical performances were studied.

Effect of polyethylene glycol on the crystallization, rheology and foamability of poly(lactic acid) containing in situ generated polyamide 6 nanofibrils

Effect of Melt Viscosity on the Cell Morphology and Properties of Poly(lactic Acid) Foams

Rheological behavior, crystallization properties, and foaming performance of chain-extended poly (lactic acid) by functionalized epoxy

Synergistic Effects of Polyethylene Glycol and Cellulose Nanofibers on the Isothermal and Non-isothermal Crystallization Behaviors of Polylactide

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Effect of Dendrimer‐like PAMAM Grafted Attapulgite on the Microstructure and Morphology of Nylon‐6

Effect of nucleating agent incorporation on the crystallization and mechanical properties of polylactide/polyamide elastomer blends

A New Method to Prepare Low Melting Point Polyamide‐6 and Study Crystallization Behavior of Polyamide‐6/calcium Chloride Complex by Rheological Method

Crystallization and Performance of Polyamide Blends Comprising Polyamide 4, Polyamide 6, and Their Copolymers

Effect of nanocrystalline cellulose on mechanical, thermal, and barrier properties of polylactic acid blown composite film

The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends

The synergistic effect of polytetrafluoroethylene in-situ fibrillation and dibenzoyl sebacate hydrazide on the crystallization and foaming behavior of poly (lactic acid)

The effect of poly(ethylene glycol) on the properties of poly (lactic acid)/silane-modified bacterial cellulose nanocomposites

In Situ Fibrillation of Polyamide 6 in Isotactic Polypropylene Occurring in the Laminating‐multiplying Die

Effect of Compatibilizer on Morphology and Properties of HDPE/Nylon 6 Blends

Effect of Poly(Ethylene Glycol) on the Properties and Foaming Behavior of Macroporous Poly(Lactic Acid)/Sodium Chloride Scaffold

Combined Effects of Cellulose Nanofiber Nucleation and Maleated Polylactic Acid Compatibilization on the Crystallization Kinetic and Mechanical Properties of Polylactic Acid Nanocomposite

Structure and property changes of polyamide 6 during the gel-spinning process

Functionalization of Polypropylene and Compatibilization of Polypropylene/Nylon 6 Blends with Copolymers Containing Alpha-Methyl Styrene Units

Enhanced Crystallization Kinetics of Symmetric Poly(l-Lactide)/poly(d-lactide) Stereocomplex in the Presence of Nanocrystalline Cellulose

Compatibilization Effect of MMA-co-GMA Copolymers on the Properties of Polyamide 6/poly(vinylidene Fluoride) Blends