Abstract:The poly(ethylene terephthalate) (PET)/isotactic polypropylene (iPP) in situ microfibrillar blends have been prepared through a “slit die extrusion–hot stretch–quenching” process, in which PET assumes microfibrils with 0.5–15μm in diameter depending on the hot stretching ratios (HSR, the area of the transverse section of the die to the area of the transverse section of the extrudate). The injection molded specimens of virgin iPP and the PET/iPP blends were prepared by conventional injection molding (CIM) and by shear controlled orientation injection molding (SCORIM), respectively. The effect of shear stress and PET phase with different shape on superstructures and their distribution of injection molded microfibrillar samples were investigated by means of small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS). The shear (or elongational) flow during CIM and SCORIM can induce oriented lamellae (i.e. kebabs induced by shish). The shish-kebab structure appears not only in the skin and intermediated layers of CIM samples, but also in the whole region of SCORIM samples. For the neat iPP samples, a more “stretched” shish-kebab structure with higher orientation degree can be obtained in the interior region (intermediate and core layers) by the SCORIM method; moreover, the SCORIM can result in the growth of β-form crystal both in intermediate layer and in core layer, which only appears in intermediate layer of the neat iPP samples obtained by CIM. For the PET/iPP blends, interestingly, the addition of microfibrils as well as their aspect ratios can affect the orientation degree of kebabs only in the intermediate layers, and the addition of microfibrils with a low aspect ratio can bring out a considerable increase in the orientation degree of kebabs along the flow direction. However, for the SCORIM, the addition of microfibrils seems to be a minor effect on the orientation degree of kebabs, and it tends to hamper the formation of a more “stretched” shish-kebab structure and suppresses the growth of β-form crystal distinctly. Furthermore, It appears from experiment that γ-form crystals can grow successfully in this oriented iPP melt with the synergistic effect of shear and pressure only when the growth of β crystals can be restrained by some factors, such as the PET dispersed phase and thermal conditions (cooling rate).

In Situ Fibrillation of Polyamide 6 in Isotactic Polypropylene Occurring in the Laminating‐multiplying Die

The Formation of a Highly Oriented Structure and Improvement of Properties in PP/PA6 Polymer Blends during Extrusion-Stretching

Influence of Preparation Methods on the Structures and Properties for the Blends Between Polyamide 6co6t and Polyamide 6: Melt‐mixing and In‐situ Blending

Additive Manufacturing of Polyamide 66: Effect of Process Parameters on Crystallinity and Mechanical Properties

Interfacial Enhancement and Composite Manufacturing of Continuous Carbon-Fiber-Reinforced PA6T Composites via PrePA6T Ultrafine Powder

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

In situ microfibrillar morphology and properties of polypropylene/polyamide/carbon black composites prepared through multistage stretching extrusion

A Scanning Electron Microscopy Study On The Morphologies Of Isotactic Polypropylene Induced By Its Own Fibers

The Distribution and Morphological Evolution of Dispersed Phase in Laminating-Multiplying Elements During Extrusion

Structure, Morphology and Properties of a Novel Molecular Composite by In‐Situ Blending of Anionic Polyamide 6 with a Polyamide Copolymer Containing Rigid Segments

In‐Situ Microfibrillar PET/iPP Blend Via a Slit Die Extrusion, Hot Stretching and Quenching Process: Influences of PET Concentration on Morphology and Crystallization of Ipp at a Fixed Hot Stretching Ratio

Structure and property changes of polyamide 6 during the gel-spinning process

Crystalline Morphology of Isotactic Polypropylene (ipp) in Injection Molded Poly(Ethylene Terephthalate) (pet)/ipp Microfibrillar Blends

The Preparation of Monomer Casting Polyamide 6/Thermotropic Liquid Crystalline Polymer Composite Materials with Satisfactory Miscibility

Preparation of a new filament based on polyamide-6 for three-dimensional printing

Improved interfacial shear strength in carbon fiber enhanced semi-aromatic polyamide 6T composite via in-situ polymerization on fiber surface

A New Method to Prepare Low Melting Point Polyamide‐6 and Study Crystallization Behavior of Polyamide‐6/calcium Chloride Complex by Rheological Method

Crystal morphology and tensile properties of LLDPE containing PP fibers as obtained via dynamic packing injection molding

THE STRUCTURE AND PROPERTIES OF AN in Situ BLEND COMPOSED OF POLYAMIDE 6 AND A NON-CRYSTALLIZABLE SEMI-AROMATIC POLYAMIDE COPOLYMER

Effect of polyethylene glycol on the crystallization, rheology and foamability of poly(lactic acid) containing in situ generated polyamide 6 nanofibrils

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends