Study on Reduction of Sludge Water in Urban Water Treatment Plants

Chen Wei

Abstract:The reduction of sludge water in urban water treatment plants was studied with a focus of developing water-saving technologies. By analyzing sludge water quality and conducting sludge reduction tests in a demonstration water treatment plant, water-saving sludge discharge conditions of plant structures are brought up: the sludge discharge time of folded plate flocculator is 20 seconds each time for pipes No.1 and No.2, 40 seconds each time for pipes No.3 and No.4, and 60 seconds each time for pipes No.5 to No.8; in the horizontal-flow sedimentation tank, the sludge discharge cycle for the first 20 meters is 24 hours, and the sludge discharge is two-pass at a time; the sludge discharge cycle for the backward 70 meters is 48 hours, and the sludge discharge is one-pass at a time; the backwash cycle of the V-shaped filter is 48 h, and the backwash procedure is air washing for 3 minutes, air-water washing for 3 minutes, water washing for 5 minutes and surface sweep washing for 11 minutes. The operation shows that the water-saving sludge discharge conditions do not affect the status of water quality and allow the flocculator, the sedimentation tank and the filter to save water by 25%, 37.5% and 39.7% respectively. The total water consumption rate for sludge discharge is reduced from 3.07% to 1.9%. The water-saving sludge discharge conditions can reduce sludge water of nearly 430 000 m3/a and save production cost of 420 000 RMB annually. The environmental and economic benefits are all considerable.

Environmental Science,Engineering