Abstract:Fullerene derivatives, especially [6,6]-phenyl-C<sub>61</sub>-butyric acid methyl ester (PCBM), have been widely applied as electron transport layers of inverted planar heterojunction perovskite solar cells (PSCs). However, the solution-processed PCBM capping layer suffers from limited surface wetting which hinders the improvement in efficiency and scalability of PSCs. Herein, we develop a facile hybrid solvent strategy that enables very fast wetting of the PCBM capping layer atop of the perovskite surface, leading to an improved interfacial contact and electron transport. The significantly enhanced wettability of the PCBM solution fulfilled through blending isopropyl alcohol into the commonly used chlorobenzene (CB) is attributed to the reduced surface tension while retaining viscosity. As a result, the electron mobility and electric conductivity of the PCBM capping layer increase by around two times, and the PSC devices exhibit the highest power conversion efficiency (PCE) of 19.92%, which is improved by ∼18% relative to that of the control device (16.78%). Importantly, this strategy is also applicable for other alcohols (ethanol and methanol) and CB blends. Moreover, the fast wetting approach enables us to deposit the PCBM capping layer using a facile drop-casting method, affording comparable PCEs to those obtained by the conventional spin-coating method, which is not achievable by using the conventional single solvent. This fast wetting PCBM capping layer also contributes to efficiency improvement of large-area (1 cm<sup>2</sup>) devices. These advances hold great potential for other scalable deposition methods such as blade-coating and slot-die coating.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11164?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11164</a>.Videos of the 0.15IPA:CB hybrid solvent, pure CB, and pure IPA dropped onto perovskite films (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11164/suppl_file/am0c11164_si_001.zip">ZIP</a>)Contact angles of different solvents over time; surface tensions and viscosities; cross-sectional SEM images; UV–vis absorption spectra of PCBM films; electron mobility characterization; analysis of time-resolved PL spectra; statistic photovoltaic parameters; photovoltaic parameters in different scan directions; steady-state photocurrent output; EQE spectra; photovoltaic parameters of large-area devices; ambient stability of PSC device; and photovoltaic parameters of devices using other alcohol solvents and replacing PCBM with another fullerene derivative (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11164/suppl_file/am0c11164_si_002.pdf">PDF</a>)This article has not yet been cited by other publications.

Optimization of Ag/PCBM interface via solvent treatment for efficient perovskite solar cell

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Elucidating the Roles of TiCl4 and PCBM Fullerene Treatment on TiO2 Electron Transporting Layer for Highly Efficient Planar Perovskite Solar Cells

Fast Wetting of a Fullerene Capping Layer Improves the Efficiency and Scalability of Perovskite Solar Cells

Efficient and stable inverted perovskite solar cells enabled by homogenized PCBM with enhanced electron transport

Synergistic Interface Layer Optimization and Surface Passivation with Fluorocarbon Molecules toward Efficient and Stable Inverted Planar Perovskite Solar Cells

Antisolvents Treatment of Cs 0.15 FA 0.85 PbI 3 Boosting Efficiency for Perovskite Solar Cells

Synergic Interface Optimization with Green Solvent Engineering in Mixed Perovskite Solar Cells

Isomer‐Pure Bis‐PCBM‐Assisted Crystal Engineering of Perovskite Solar Cells Showing Excellent Efficiency and Stability

An Interface Co-modification Strategy for Improving the Efficiency and Stability of CsPbI 3 Perovskite Solar Cells

Zn0.8Cd0.2S@PCBM Hybrid As an Efficient Electron Transport Layer for Air‐Processed P‐i‐n Planar Perovskite Solar Cells: Improvement of Interfacial Electron Transfer and Device Stability

Mixed Solvents Assisted Post-Treatment Enables High-Efficiency Single-Junction Perovskite and 4T Perovskite/CIGS Tandem Solar Cells

Performance Improvement of Polymer Solar Cells by Using A Solvent-Treated Poly(3,4-Ethylenedioxythiophene):Poly(Styrenesulfonate) Buffer Layer

Improving the Stability and Efficiency of Perovskite Solar Cells by Controlling the Crystallization Active Layer with Binary Anti-solvent

Enhancing the Performance of Perovskite Solar Cell Via Optimizing the Solvent of Hole Transport Layer

The effect of alcohol solvent treatment on the performance of inverted polymer solar cells

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

Efficient and highly light stable planar perovskite solar cells with graphene quantum dots doped PCBM electron transport layer

Efficient Inverted Perovskite Photovoltaics Through Surface State Manipulation

Improvement of Photovoltaic Performance of Perovskite Solar Cells by Synergistic Modulation of SnO2 and Perovskite via Interfacial Modification

Optimization of Anti-Solvent Engineering Toward High Performance Perovskite Solar Cells