Co-activation Pore Engineering of Polyphthalocyanine-Derived Carbon Nanosheets for Supercapacitors in Organic Electrolytes
Lu Liu,Jin Niu,Zhengping Zhang,Feng Wang
DOI: https://doi.org/10.1021/acsaem.1c01138
IF: 6.4
2021-07-29
ACS Applied Energy Materials
Abstract:As the primary electrode active materials for supercapacitors, porous carbons are widely prepared by carbonization-activation methods. Nevertheless, a simple activation procedure by using a single activator is hard to satisfy requirements of electrode materials in organic electrolytes, which can provide a larger voltage window but also demand larger-size micropores to accumulate/release charges than aqueous electrolytes. Herein, a rational co-activation method toward porous carbon nanosheets is developed for high-performance organic electrolyte-based supercapacitors by directly pyrolyzing zinc polyphthalocyanines-graft-potassium hydroxide (ZnPPc-g-KOH). The Zn2+ and K+ participate in pore formation, which facilitates the fabricating of porous carbon nanosheets with a large surface area of 2701 m2 g–1 and a narrow micropore-size distribution at around 1.50 nm. The resulting polyphthalocyanines-derived carbons deliver a high specific capacitance of 200 F g–1 at 10 A g–1 and a long cycling lifetime (over 98% of the initial capacitance after 10000 cycles) in 1.0 M TEABF4/AN, along with high energy and power properties (44.5/35.0 Wh kg–1 at 3.1/28.6 kW kg–1, respectively) in the symmetric supercapacitor. This polyphthalocyanines-derived carbon opens up a route to develop carbon-based active materials with well-built porous structures for electrochemical energy storage and conversion.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01138.Physical characterization (NMR, XRD, UV, FT-IR, SEM, TEM, and BET analysis) and electrochemical test (GCD, CV, and EIS) of samples as well as the methods of samples preparation, device assembly, chemical test, and performance calculation (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,energy & fuels