Abstract:Sub-1 nm pores can lead to an anomalous increase in the supercapacitive performance [1], but it still faces great challenges from its relatively low sub-1 nm pore content, complicated preparation process, low yield and high cost. Here we successfully prepared a sub-1 nm pore-rich carbon from biomass wastes using a facile method by pre-treating walnut shell powder at 380 ℃ in air for different times to delicately tailor carbon defects, followed by KOH activation at 700 ℃. The as-prepared optimal material delivers the highest sub-1 nm pore content (Vsub-1 nm = 0.57 cm3 g-1, Vsub-1 nm/Vt = 58.4 %) among all reported porous carbons. A supercapacitor made from the material accomplishes an ultrahigh specific capacitance of 298.7F g-1 at 1 A g-1 in a two-electrode device, excellent rate capability (78.8 % retention from 1 to 10 A g-1) and long-cyclic life (94 % retention after 10,000 cycles at 10 A g-1) in KOH. Even in Et4NBF4 electrolyte that is often used in commercial supercapacitors, a high energy density of 82.8 Wh kg-1 at 7 kW kg-1 and excellent cycling performance (90 % retention after 10,000 cycles at 5 A g-1) can be achieved, ranking the best among all reported carbon-based electrical double layer capacitors tested in the same electrolyte. More importantly, it drives a light-emitting-diode (LED) to operate for as long as 20 min, vividly demonstrating the great potential of sub-1 nm pore-rich carbon-based high performance supercapacitors in practical applications.

Sub-nanopores-containing N,O-codoped porous carbon from molecular-scale networked polymer hydrogel for solid-state supercapacitor

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

Highly N/O co-doped ultramicroporous carbons derived from nonporous metal-organic framework for high performance supercapacitors

A micropore-dominant N,P,S-codoped porous carbon originating from hydrogel for high-performance supercapacitors mediated by phytic acid

Trapping Precursor-Level Functionalities in Hierarchically Porous Carbons Prepared by a Pre-Stabilization Route for Superior Supercapacitors

Porous Carbon Globules with Moss-Like Surfaces from Semi-Biomass Interpenetrating Polymer Network for Efficient Charge Storage

Fabricating N, P-Codoped Hierarchical Porous Carbons from Lignin via Assembled Templating and Activation Strategy for High-Performance Supercapacitors

Facile and low-cost fabrication of interconnected hierarchically porous carbon for high-performance supercapacitors

Influence of Subnanoporous Carbon with a Customizable Pore Structure on Aqueous Supercapacitors

Facile method to produce sub-1 nm pore-rich carbon from biomass wastes for high performance supercapacitors

Scalable One-Step Synthesis of N,S Co-Doped Graphene-Enhanced Hierarchical Porous Carbon Foam for High-Performance Solid-State Supercapacitors

Organic Crosslinked Polymer-Derived N/O-Doped Porous Carbons for High-Performance Supercapacitor

Fabrication of Porous Carbon Nanofibers from Polymer Blends Using Template Method for Electrode-Active Materials in Supercapacitor

Thiocyanogen-modulated N, S Co-doped lignin hierarchical porous carbons for high-performance aqueous supercapacitors

Optimized Mesopores Enabling Enhanced Rate Performance in Novel Ultrahigh Surface Area Meso-/Microporous Carbon for Supercapacitors

Ultrafast pore-tailoring of dense microporous carbon for high volumetric performance supercapacitors in organic electrolyte

Fabrication of N/O self-doped hierarchical porous carbons derived from modified coal tar pitch for high-performance supercapacitors

Design and structure optimization of 3D porous graphitic carbon nanosheets for high-performance supercapacitor

Fabrication of nitrogen and phosphorus-codoped porous carbon for high volumetric performance supercapacitors

Rational design of dense microporous carbon derived from coal tar pitch towards high mass loading supercapacitors

An in-situ Blowing-etching strategy for preparation of Macro-meso-micro hierarchical porous carbon and its supercapacitive property