Abstract:The Large Hadron Collider (LHC) will operate with 7 TeV/c protons with a luminosity of 10(34) cm(-2) s(-1). This requires two beams, each with 2808 bunches. The nominal intensity per bunch is 1.15 x 10(11) protons and the total energy stored in each beam is 362 MJ. In previous papers, the mechanisms causing equipment damage in case of a failure of the machine protection system was discussed, assuming that the entire beam is deflected onto a copper target. Another failure scenario is the deflection of beam, or part of it, into carbon material. Carbon collimators and beam absorbers are installed in many locations around the LHC close to the beam, since carbon is the material that is most suitable to absorb the beam energy without being damaged. In case of a failure, it is very likely that such absorbers are hit first, for example, when the beam is accidentally deflected. Some type of failures needs to be anticipated, such as accidental firing of injection and extraction kicker magnets leading to a wrong deflection of a few bunches. Protection of LHC equipment relies oil the capture of wrongly deflected bunches with beam absorbers that are positioned Close to the beam. For maximum robustness, the absorbers jaws are made Out of carbon materials. It has been demonstrated experimentally and theoretically that carbon survives the impact of a few bunches expected for such failures. However, beam absorbers are not designed for ilia or failures in the protection system, such as the beam dump kicker deflecting the entire beam by a wrong angle. Since beam absorbers are closest to the beam, it is likely that they are hit first in my case of accidental beam loss. In the present paper we present numerical simulations using carbon as target material in order to estimate the damage caused to carbon absorbers in case of major beam impact.

Advanced simulation techniques for Radiation Protection studies at the Large Hadron Collider

Radiation transport calculations for the European Spallation Source accelerator environment

Collimation simulations for the FCC-ee

Radiation protection at CERN

A Lightweight Algorithm to Model Radiation Damage Effects in Monte Carlo Events for High-Luminosity Large Hadron Collider Experiments

Monte Carlo Simulation and Experimental Validation for Radiation Protection with Multiple Complex Source Terms and Deep Penetration for a Radioactive Liquid Waste Cementation Facility

Machine Protection and Interlock Systems for Circular Machines - Example for LHC

A lightweight algorithm to model radiation damage effects in Monte Carlo events for High-Luminosity LHC experiments

Power deposition studies for standard and crystal-assisted heavy ion collimation inthe CERN Large Hadron Collider

Radiation Field Simulation of C-ADS Injector II

Upgrades Of the SPS, Transfer Line and LHC Injection Protection Devices For the HL-LHC Era

New simulation software technologies at the LHCb Experiment at CERN

Radiation Risks and Mitigation in Electronic Systems

Monte Carlo Calculation of Induced Radioactivity for a 15-MV Electron Accelerator Head Structure

Simulations of Full Impact of the Large Hadron Collider Beam with a Solid Graphite Target

The hadronic models for cosmic ray physics: the FLUKA code solutions

Impact of Detector Simulation in Particle Physics Collider Experiments

INTERACTION OF THE CERN LARGE HADRON COLLIDER (LHC) BEAM WITH SOLID METALLIC TARGETS

Simulation of induced radioactivity for Heavy Ion Medical Machine

An overview: multiscale simulation in understanding the radiation damage accumulation of reactor materials

Study on the Design and Experimental Verification of Multilayer Radiation Shield Against Mixed Neutrons and Γ-Rays