Abstract:The PHC (pre-stressed high-strength concrete) pile foundation, serving as an innovative supporting structure for solar power stations, is subjected to complex loading conditions in engineering scenarios. In this study, field tests of the full-scale PHC Pile foundation were conducted in sand layer, loess layer, and double-layer sites to investigate its operational behavior under different load conditions. The study assessed the inclination of the column top, ground displacement, and torsion to analyze the stress and deformation characteristics of PHC pile foundations. The deformation of PHC short pile foundations exhibited distinct phases. Torsional load reduced the column crack load by 30%. The pile cap effectively controlled plastic deformation, minimizing foundation deformation, while torsional load increased lateral deformation. Under cyclic load, the PHC pile behaved with an approximate elasticity characteristic within the test load range. The deformation increased by approximately 10%. Furthermore, three-dimensional numerical simulations analyzed the effects of foundation dimension, bending-moment-to-lateral-load ratio, torque-to-lateral-load ratio, and pile cap size on internal forces and deformation. Simulations indicated that increasing the pile cap length was more advantageous for reducing deformation and internal forces. The bending-moment-to-lateral-load ratio was significant in design, while the torque-to-lateral-load ratio had a negligible impact. A comprehensive design program is proposed based on field tests and numerical simulations, considering deformation and bearing capacity. The study confirms the reliability of the PHC pile foundation as a support structure for heliostats, aiming to offer valuable insights for practical applications.

Theoretical and experimental study on overall stability for the thin-walled double cantilever photovoltaic stent under uniform pressure

Structural formation and stability performance investigations of large partial double layer reticulated shell structures

Static Bending and Free Vibration of Organic Solar Cell Resting on Winkler-Pasternak Elastic Foundation Through the Modified Strain Gradient Theory

ON STABILITY OF I-SECTION STEEL CANTILEVERS

STABILITY OF DOUBLY SYMMETRIC I-SECTIONAL CANTILEVERS WITH DIFFERENT BOUNDARY CONDITIONS AT TIP

Test on mechanical and electrical behavior of composite of flexible thin-film solar cells and PVDF membrane

Experimental and numerical study on stability behavior of reticulated shell composed of plate members

Bending Strength Evaluation and Power Generation Performance Optimization of a Curved Photovoltaic-Thermoelectric Hybrid Device

Study of the post buckling behaviours for the phase to phase composite spacer

Isogeometric Analysis of Bending, Vibration, and Buckling Behaviors of Multilayered Microplates Based on the Non-Classical Refined Shear Deformation Theory

Study on the bearing resistance of axially compressed L-shaped stainless steel core plate wall based on the stability loss

Experimental Research On Static Strength of C-shaped Steel Structure in Photovoltaic Agricultural Greenhouse

Numerical and theoretical analysis of staggered cruciform stubs

Experimental and analytical investigation of stiffened steel tubes for wind turbine towers under compression-bending load

EXPERIMENTAL STUDY ON THE STRENGTH OF COMPLEX THIN-WALLED STRUCTURES UNDER INTERNAL PRESSURE

Structural design and simulation analysis of fixed adjustable photovoltaic support

Experimental study on Tapered Concrete-Filled Double Skin Steel Tubular columns under torsion

Experimental and numerical investigations on the mechanical response of full-scale PHC pile foundations for solar power generation

Experimental and Numerical Study on the Ultimate Strength of Stiffened Plates Subjected to Combined Biaxial Compression and Lateral Loads

Study on Stability Round Stronger Axis of the Column with Composite Section of Double Limbs under Axial Compression

Stability Analysis of Sun Valley Steel Structure for the Expo Axis Project