Abstract:Carbon aerogels with excellent compressibility and resilience are attracting considerable attention in broad application prospects for their reversible resilience and resistance to damage from external stress. It is of great interest to explore green and low-cost carbon aerogels from sustainable resources but remains challenging because of the brittleness of carbon blocks. Herein, inspired by the anisotropic architectures in nature, we propose a bottom-up approach for fabricating an anisotropic carbon aerogel with a 3D lamellar structure from cellulose nanofibers. The aligned and continuous lamellar texture with desirable thickness (142 nm) can effectively transfer stress throughout the 3D network and resist the destruction at high compression, and thus, the carbon aerogel exhibits shape recovery from high compression strain and excellent fatigue resistance. The carbon aerogel can withstand extremely high compression strain (95%) for at least 50 cycles or 50,000 cycles at 50% strain with 84% height retention. Moreover, the excellent mechanical performance, stable 3D lamellar architecture, and high conductivity endow the carbon aerogel with rapid current response and high sensitivity in a wide pressure range (0.002–7 kPa). This study introduces the carbon aerogel as an excellent choice for fabricating the 3D tactile sensor to capture various signals of human motions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02051?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02051</a>.<a class="ref internalNav" href="#sec2">Experimental Section</a>; height of the CNF; FT-IR spectrum of the CNF; lamellar surfaces of CNF0.45%, CNF1.8%, CNF0.45%–C, and CNF1.8%–C; SEM images of aerogels before annealing; digital photographs of the as-prepared aerogels and carbon aerogels; XRD and Raman patterns of CNFX%–C; microstructures of CNF aerogels (CNF0.9%) before and after annealing; digital photographs of the as-prepared aerogels and carbon aerogels before and after compression; compressibility of CNFX%–C; SEM images of CNFX%–C after 10,000 cycles at 50% strain; lamellar thicknesses of CNFX%–C; R/R0 of CNF0.9%–C and its linear sensitivity; and comparison of pressure detection limit of CNF0.9%–C (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_001.pdf">PDF</a>)Compression at 90% strain for one cycle (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_002.mp4">MP4</a>)Finite element analysis of thin lamella (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_003.mp4">MP4</a>)Finite element analysis of thick lamella (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_004.mp4">MP4</a>)Finite element analysis of compression from the x direction (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_005.mp4">MP4</a>)Finite element analysis of compression from the y direction (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_006.mp4">MP4</a>)Finite element analysis of compression from the z direction (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_007.mp4">MP4</a>)This article has not yet been cited by other publications.

Cellulose Fiber-Derived Carbon Fiber Networks for Durable Piezoresistive Pressure Sensing

Multifunctional Flexible Pressure Sensor Based on a Cellulose Fiber-Derived Hierarchical Carbon Aerogel

3D Printing Lignin Carbonized Nanotube and Cellulose Nano Fiber Aerogel for Wearable Pressure Sensors

A High-Performance Flexible Piezoresistive Sensor Based on a Nanocellulose/Carbon-Nanotube/Polyvinyl-Alcohol Composite With a Wrinkled Microstructure

A resilient and lightweight cellulose/graphene oxide/polymer-derived multifunctional carbon aerogel generated from Pickering emulsion toward a wearable pressure sensor

Superelastic carbon aerogels with anisotropic and hierarchically-enhanced cellular structure for wearable piezoresistive sensors

Covalently Interconnected Thermoplastic Polymeric Nanofiber/Carbon Nanotube Composite Nanofibrous Aerogels for Piezoresistive Sensors

High-sensitivity piezoresistive sensors based on cellulose handsheets using origami-inspired corrugated structures

Microstructured CNTs/Cellulose Aerogel for a Highly Sensitive Pressure Sensor

Rationally Designed Cellulose Hydrogel for Ultrasensitive Pressure Sensor

Hydrophobic modification of cellulose nanofibers by gallic acid and the application in pressure sensing

Flexible piezoresistive pressure sensors based on nanocellulose aerogels for human motion monitoring: A review

Development of a flexible and highly sensitive pressure sensor based on an aramid nanofiber-reinforced bacterial cellulose nanocomposite membrane

Facilely constructed two-sided microstructure interfaces between electrodes and cellulose paper active layer: eco-friendly, low-cost and high-performance piezoresistive sensor

Superelastic Cellulose Sub‐Micron Fibers/Carbon Black Aerogel for Highly Sensitive Pressure Sensing

Anisotropic Carbon Aerogel from Cellulose Nanofibers Featuring Highly Effective Compression Stress Transfer and Pressure Sensing

Constructing a continuous reduced graphene oxide network in porous plant fiber sponge for highly compressible and sensitive piezoresistive sensors

Breathable and Large Curved Area Perceptible Flexible Piezoresistive Sensors Fabricated with Conductive Nanofiber Assemblies

Mechanically Robust and Elastic Graphene/Aramid Nanofiber/Polyaniline Nanotube Aerogels for Pressure Sensors

A Flexible and Highly Sensitive Pressure Sense Electrode Based on Cotton Pulp for Wearable Electronics

Surface Engineering of a 3D Topological Network for Ultrasensitive Piezoresistive Pressure Sensors