Abstract:Efficient separation of harmful contaminants (e.g., per- and polyfluoroalkyl substances, PFASs) from valuable components (water and nutrients) is essential to the resource recovery from domestic wastewater for agricultural purposes. Such selective recovery requires precise separation at the angstrom scale. Although nanofiltration (NF) has the potential to achieve solute–solute separation, the state-of-the-art polyamide (PA) membranes are typically constrained by limited precision of solute–solute selectivity and their well-documented permeability–selectivity trade-off. Herein, we present a novel capillary-assisted interfacial polymerization (CAIP) approach to generate metal–organic framework (MOF)-PA nanocomposite membranes with reduced surface charges and more uniform pore sizes that favor solute selectivity by enhanced size exclusion. By uniquely regulating the PA–MOF interactions using the capillary force, CAIP results in effective exposure of MOF nanochannels on the membrane surface and a PA matrix with a high cross-linking gradient in the vertical direction, both of which contribute to an exceptional water permeance of ∼18.7 LMH/bar and an unprecedentedly high selectivity between nutrient ions and PFASs. Our CAIP approach breaks new ground for utilizing nanoparticles with nanochannels in fabricating the next-generation, fit-for-purpose NF membranes for improved solute–solute separations.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.est.2c01728.Materials and chemicals; synthesis of MOF NPs; membrane fabrication methods; PFAS concentration quantification; determination of the adsorbed amounts of PFASs; calculation of membrane average pore size and pore size distribution; calculation of the cross-linking degree of PA structure; determination of membrane surface energy parameters and free energy; comparison between the TIP and CAIP membranes; determination of the capillary rise; schematics showing the organic linkers of the MOF NPs and the formation processes and structures of the TFN membranes; properties of the synthesized MOF NPs; adsorption amounts of PFASs on the NPs and membranes; FTIR spectra of the NF membranes; time sequence of the wetting (capillary) process of a MOF NP-deposited PES membrane; rejection of PNIs and PFASs by CAIP-MOF membranes; surface roughness of PES membranes with different MOF loadings; results of MD simulations; membrane anti-fouling property; chemical constituents of the synthetic AnMBR effluent; physicochemical properties of PFASs and inorganic ions; characteristics and performances of the CAIP-MOF membranes; performances of the TIP-MOF and ILIP-MOF membranes; surface tension components of standard liquids and foulants; and measured contact angles of standard liquids (PDF)This article has not yet been cited by other publications.

Enhancing Rejection of Short-chain Per- and Polyfluoroalkyl Substances by Tailoring the Surface Charge of Nanofiltration Membranes

Removing emerging perfluoroalkyl ether acids and fluorotelomer sulfonates from water by nanofiltration membranes: Insights into performance and underlying mechanisms

Membranes with Negatively-Charged Nanochannels Fabricated from Aqueous Sulfonated Polysulfone Nanoparticles for Enhancing the Rejection of Divalent Anions

Hydrophilic membranes for effective removal of PFAS from water: Anti-fouling, durability, and reusability

Hyaluronic acid-modified nanofiltration membrane for ultrahigh water permeance and efficient rejection of PFASs

A novel ZIF-L/PEI thin film nanocomposite membrane for removing perfluoroalkyl substances (PFASs) from water: Enhanced retention and high flux

Removal of per- and polyfluoroalkyl substances by nanofiltration: effect of molecular structure and coexisting natural organic matter

Evaluating the efficiency of nanofiltration and reverse osmosis membrane processes for the removal of per- and polyfluoroalkyl substances from water: A critical review

Efficient removal of per- and polyfluoroalkyl substances by a metal-organic framework membrane with high selectivity and stability

Evaluation of the Removal Efficiency of Per- and Polyfluoroalkyl Substances in Drinking Water using Nanofiltration Membranes, Active Carbon and Anion Exchange

Effects of functional groups of polyfluoroalkyl substances on their removal by nanofiltration

Rejection of perfluoroalkyl acids by nanofiltration and reverse osmosis in a high-recovery closed-circuit membrane filtration system

Effects of surfactants, ion valency and solution temperature on PFAS rejection in commercial reverse osmosis (RO) and nanofiltration (NF) processes

Evaluation of commercial nanofiltration and reverse osmosis membrane filtration to remove per‐and polyfluoroalkyl substances (PFAS): Effects of transmembrane pressures and water matrices

Capillary-Assisted Fabrication of Thin-Film Nanocomposite Membranes for Improved Solute–Solute Separation

Efficient removal of perfluorinated compounds with the polyamide nanofiltration membrane and membrane fouling resistance analysis

MXene (Ti3T2CX)-reinforced thin-film polyamide nanofiltration membrane for short-chain perfluorinated compounds removal

Commentary: Is the hip bone connected to the spine bone?

Removal of Perfluorooctane Sulfonates from Water by a Hybrid Coagulation–nanofiltration Process

Rejection of PFAS and priority co-contaminants in semiconductor fabrication wastewater by nanofiltration membranes

Rheumatoid arthritis: immune surveillance gone wild?