Abstract:Efficient separation of harmful contaminants (e.g., per- and polyfluoroalkyl substances, PFASs) from valuable components (water and nutrients) is essential to the resource recovery from domestic wastewater for agricultural purposes. Such selective recovery requires precise separation at the angstrom scale. Although nanofiltration (NF) has the potential to achieve solute–solute separation, the state-of-the-art polyamide (PA) membranes are typically constrained by limited precision of solute–solute selectivity and their well-documented permeability–selectivity trade-off. Herein, we present a novel capillary-assisted interfacial polymerization (CAIP) approach to generate metal–organic framework (MOF)-PA nanocomposite membranes with reduced surface charges and more uniform pore sizes that favor solute selectivity by enhanced size exclusion. By uniquely regulating the PA–MOF interactions using the capillary force, CAIP results in effective exposure of MOF nanochannels on the membrane surface and a PA matrix with a high cross-linking gradient in the vertical direction, both of which contribute to an exceptional water permeance of ∼18.7 LMH/bar and an unprecedentedly high selectivity between nutrient ions and PFASs. Our CAIP approach breaks new ground for utilizing nanoparticles with nanochannels in fabricating the next-generation, fit-for-purpose NF membranes for improved solute–solute separations.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.est.2c01728.Materials and chemicals; synthesis of MOF NPs; membrane fabrication methods; PFAS concentration quantification; determination of the adsorbed amounts of PFASs; calculation of membrane average pore size and pore size distribution; calculation of the cross-linking degree of PA structure; determination of membrane surface energy parameters and free energy; comparison between the TIP and CAIP membranes; determination of the capillary rise; schematics showing the organic linkers of the MOF NPs and the formation processes and structures of the TFN membranes; properties of the synthesized MOF NPs; adsorption amounts of PFASs on the NPs and membranes; FTIR spectra of the NF membranes; time sequence of the wetting (capillary) process of a MOF NP-deposited PES membrane; rejection of PNIs and PFASs by CAIP-MOF membranes; surface roughness of PES membranes with different MOF loadings; results of MD simulations; membrane anti-fouling property; chemical constituents of the synthetic AnMBR effluent; physicochemical properties of PFASs and inorganic ions; characteristics and performances of the CAIP-MOF membranes; performances of the TIP-MOF and ILIP-MOF membranes; surface tension components of standard liquids and foulants; and measured contact angles of standard liquids (PDF)This article has not yet been cited by other publications.

MXene (Ti3T2CX)-reinforced thin-film polyamide nanofiltration membrane for short-chain perfluorinated compounds removal

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Fabrication of MXene-based membranes and their application in per- and polyfluorinated substances removal: Comparison with commercial membranes, challenges, and future improvements

Efficient removal of perfluorinated compounds with the polyamide nanofiltration membrane and membrane fouling resistance analysis

Hyaluronic acid-modified nanofiltration membrane for ultrahigh water permeance and efficient rejection of PFASs

Efficient removal of per- and polyfluoroalkyl substances by a metal-organic framework membrane with high selectivity and stability

Novel thin-film nanocomposite membranes with crosslinked polyvinyl alcohol interlayer for Perfluorinated Compounds (PFCs) removal

A novel ZIF-L/PEI thin film nanocomposite membrane for removing perfluoroalkyl substances (PFASs) from water: Enhanced retention and high flux

Capillary-Assisted Fabrication of Thin-Film Nanocomposite Membranes for Improved Solute–Solute Separation

Fabrication of Novel Poly(M-Phenylene Isophthalamide) Hollow Fiber Nanofiltration Membrane for Effective Removal of Trace Amount Perfluorooctane Sulfonate from Water

High Efficient Thin-Film Composite Membrane: Ultrathin Hydrophilic Polyamide Film on Macroporous Superhydrophobic Polytetrafluoroethylene Substrate

MXene nanosheet stacks with tunable nanochannels for efficient molecular separation

Hydrophilic membranes for effective removal of PFAS from water: Anti-fouling, durability, and reusability

Removing emerging perfluoroalkyl ether acids and fluorotelomer sulfonates from water by nanofiltration membranes: Insights into performance and underlying mechanisms

Electrosorption approach removing PFOA from wastewater using a MXene-polyaniline film

The Preparation of High-Performance and Stable MXene Nanofiltration Membranes with MXene Embedded in the Organic Phase

Microfiltration Membrane Pore Functionalization with Primary and Quaternary Amines for PFAS Remediation: Capture, Regeneration, and Reuse

MXene-regulation polyamide membrane featuring with bubble-like nodule for efficient dye/salt separation and antifouling performance

High-flux polyamide thin film nanofiltration membrane incorporated with metal-induced ordered microporous polymers

Polyamide thin-film nanocomposite membrane containing star-shaped ZIF-8 with enhanced water permeance and PPCPs removal