Vaccination with DNA containing tat coding sequences and unmethylated CpG motifs protects cynomolgus monkeys upon infection with simian/human immunodeficiency virus (SHIV89.6P).

A. Cafaro,F. Titti,C. Fracasso,M. Maggiorella,S. Baroncelli,A. Caputo,D. Goletti,A. Borsetti,M. Pace,E. Fanales‐Belasio,B. Ridolfi,D. Negri,L. Sernicola,R. Belli,F. Corrias

DOI: https://doi.org/10.1016/S0264-410X(01)00002-0

IF: 4.169

2001-04-06

Vaccine

Abstract:

What problem does this paper attempt to address?

Comparative study on gas-sensing properties of amorphous MoS2 nanoparticles and crystalline MoS2 nanoflowers

Ying Wen,Donglin Li,Dingfeng Jin,Hongxiao Jin

DOI: https://doi.org/10.1016/j.mssp.2023.108077

IF: 4.1

2024-03-01

Materials Science in Semiconductor Processing

Abstract:High-performance gas sensors for the field of gas sensing have drawn a lot of attention to molybdenum sulfide materials, but there is little research on the influence of crystallization state of MoS2 on gas sensitivity performance. In this study, amorphous MoS2 and crystalline MoS2 were prepared by the hydrothermal method. Then, the gas-sensing characteristics of the as-synthesized amorphous MoS2 and crystalline MoS2 toward NO2 gas were thoroughly investigated and compared. According to the results, with an excellent response value of 1.99 toward 5 ppm NO2 at room temperature, the crystalline MoS2 gas sensor outperformed the amorphous one, while that of the amorphous MoS2 under the same condition was 1.25. However, Four times faster recovery periods were observed in the amorphous MoS2 sample compared to the crystalline MoS2 sample. At the same time, the recovery level of amorphous MoS2 is high and can be fully restored. We discovered that the primary cause of the strong recovery performance of amorphous MoS2 is the presence of localized states that facilitate the easy transition of electrons from the conduction band to the valence band, allowing for effective recombination with the holes. Additionally, the surface of the material absorbs a significant amount of oxygen, which will occupy more of the NO2 adsorption site and hasten the desorption of NO2. This work may aid in the development of gas sensors based on amorphous molybdenum sulfide.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Qi Sun,Kaidi Diao,Tulai Sun,Maozhong Li,Xudong Cui,He Tian,Bin Xiang

DOI: https://doi.org/10.1039/c6ra21672b

IF: 4.036

2016-01-01

RSC Advances

Abstract:Semiconductor tin oxide (SnO2) is acknowledged to be one of the semiconductor oxides with most potential for utilization as nitrogen dioxide (NO2)-sensor materials. However, the challenge to improve the gas sensitivity still remains, and this limits the full realization of the SnO2 sensor potential. In this paper, enhanced gas sensitivity obtained by the formation of a SnO2/niobium pentoxide (Nb2O5) hybrid structure is reported. As the NO2 concentration is lower to 3 ppm, the measured resistance in the SnO2/Nb2O5-based sensor is still 2.5 times larger than that in a pristine SnO2-based sensor. With an increase in the NO2 concentration, the response time of the SnO2/Nb2O5-based sensor decreases sharply whereas the pristine SnO2-based sensor response time increases. The enhanced performance is attributed to the presence of more oxygen vacancies and a higher specific surface area in the hybrid structure induced by the introduction of Nb2O5. These results provide some general guidelines for the selection of compositions to enhance the sensor performance.
Design of Hetero-Nanostructures on MoS2 Nanosheets To Boost NO2 Room-Temperature Sensing

Yutong Han,Da Huang,Yujie Ma,Guili He,Jun Hu,Jing Zhang,Nantao Hu,Yanjie Su,Zhihua Zhou,Yafei Zhang,Zhi Yang

DOI: https://doi.org/10.1021/acsami.8b05811

2018-07-05

Abstract:Molybdenum disulfide (MoS2), as a promising gas-sensing material, has gained intense interest because of its large surface-to-volume ratio, air stability, and various active sites for functionalization. However, MoS2-based gas sensors still suffer from low sensitivity, slow response, and weak recovery at room temperature, especially for NO2. Fabrication of heterostructures may be an effective way to modulate the intrinsic electronic properties of MoS2 nanosheets (NSs), thereby achieving high sensitivity and excellent recovery properties. In this work, we design a novel p-n hetero-nanostructure on MoS2 NSs using interface engineering via a simple wet chemical method. After surface modification with zinc oxide nanoparticles (ZnO NPs), the MoS2/ZnO hetero-nanostructure is endowed with an excellent response (5 ppm nitrogen dioxide, 3050%), which is 11 times greater than that of pure MoS2 NSs. To the best of our knowledge, such a response value is much higher than the response values reported for MoS2 gas sensors. Moreover, the fabricated hetero-nanostructure also improves recoverability to more than 90%, which is rare for room-temperature gas sensors. Our optimal sensor also possesses the characteristics of an ultrafast response time of 40 s, a reliable long-term stability within 10 weeks, an excellent selectivity, and a low detection concentration of 50 ppb. The enhanced sensing performances of the MoS2/ZnO hetero-nanostructure can be ascribed to unique 2D/0D hetero-nanostructures, synergistic effects, and p-n heterojunctions between ZnO NPs and MoS2 NSs. Such achievements of MoS2/ZnO hetero-nanostructure sensors imply that it is possible to use this novel nanostructure in ultrasensitive sensor applications.
Modulation of Gas Adsorption and Magnetic Properties of Monolayer-MoS2 by Antisite Defect and Strain

M. P. K. Sahoo,Jie Wang,Yajun Zhang,Takahiro Shimada,Takayuki Kitamura

DOI: https://doi.org/10.1021/acs.jpcc.6b03284

2016-01-01

Abstract:The flexible nature and high surface-to-volume ratio make monolayer-MoS2 a novel paradigm for tunable nanoelectronic devices. However, for further improvement in the performance of these devices, a new design strategy is essential to modulate the properties of an inert MoS2 basal plane. Here, we demonstrate from first-principles that the gas adsorption and magnetic properties of MoS2 can be modulated through Mo-S antisite doping and strain. The Mo-S defect with localized d-orbital electron density significantly promotes the catalytic activity which leads to highly enhanced adsorption of NO, NO2, NH3, CO, and CO2 gas molecules. On application of a biaxial tensile strain, the adsorption of NH3 is further enhanced for the antisite-doped MoS2. In addition, strain induced switching of magnetic states is also realized in antisite-doped MoS2 with and without adsorbed gas species. The superior strain modulation of antisite-doped MoS2 is explained by quantum confinement effect and strain-induced accumulation/depletion of charge density at the defect site. These results suggest MoS2 can be a promising avenue to design nanoscale spintronic devices and gas sensors.
SnO 2 Nanosheets for NIR-Enhanced NO 2 Sensing and Adsorption/Desorption

Xi Li,Wanyin Ge,Pengtao Wang,Hu Zhao,Ye Tian,Xuanmeng He,Zhifu Liu

DOI: https://doi.org/10.1021/acsanm.3c01059

IF: 6.14

2023-04-05

ACS Applied Nano Materials

Abstract:Very recently, metal–organic framework (MOF)-based derived oxides demonstrated excellent sensing performance to NO2. However, the study on the enhancement of gas-sensing characteristics by near-infrared (NIR) light for MOF-based derived oxides is still limited. In this work, we introduced the synthesis of MOF-derived SnO2 nanosheets by solvothermal and annealing processes. The structural composition and microstructure of SnO2 nanosheets were studied by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer–Emmett–Teller. The derived SnO2 nanosheet-based gas sensor has an extremely low theoretical detection limit to NO2 (45 ppb), ultrahigh response (1500 to 100 ppm), outstanding stability, and ideal selectivity. Furthermore, NIR illumination shortens the SnO2 sensor’s NO2 adsorption/desorption process. Moreover, we also proposed that NIR-excited photoelectrons were instrumental in optimizing the NO2 gas-sensing performance of SnO2 sensors. Therefore, MOF-based SnO2 sensors are attractive for high response and rapid detection of NO2 at low operating temperatures and are expected to be widely used in the preparation of NIR-enhanced NO2 gas monitoring sensors.

materials science, multidisciplinary,nanoscience & nanotechnology
Functionalized Molybdenum Disulfide (MoS2) Monolayer as Efficient Nanosensor Towards Toxic Nitrogen Containing Gases

Wadha Alfalasi,Tanveer Hussain,Nacir Tit

DOI: https://doi.org/10.1039/d4en00072b

2024-03-14

Environmental Science Nano

Abstract:Gas-sensing properties of toxic nitrogen-containing gases (e.g., NO and NO2) on selected transition metals (TMs) functionalized molybdenum disulfide (MoS2) monolayer were investigated using a combination of density-functional theory (DFT) and non-equilibrium Green's functions (NEGF) formalisms. Pristine MoS2 adsorbed NO, and NO2 with relatively weak adsorption energies of - 0.11 and – 0.19 eV, respectively. To enhance the adsorption mechanism, five doping states were considered, such as (i) Sulfur vacancy "VS", (ii) Mn, (iii) Fe, (iv) Co, and (v) Ni dopants substituting the S-site in MoS2. We found that S-vacancy, Mn-, Fe-, Co-, and Ni-doped MoS2 resulted into significantly strong adsorption energies of -2.59 (-2.76), -2.16 (-1.17), -2.87 (-1.85), -3.06 (-1.61), and -1.97 (-0.90) eV for NO (NO2), respectively. The results of the electronic structure calculations showed that the adsorption of the NO, and NO2 drastically changed the magnetic states of the substrate, for instance from paramagnetic to ferromagnetic (FM) semiconducting states (e.g., VS and Ni-doping) and from FM to either antiferromagnetic (AFM) or paramagnetic semiconducting states (e.g., Mn- or Ni-doping, respectively). The results of current-voltage (IV) characteristics showed that Co- and Ni-doping yielded the optimal sensor response and was attributed to the changes between two extreme magnetic states; for instance, from FM to paramagnetic semiconducting states and vis versa (e.g., Co-, and Ni-doping, respectively). Our refined study of selectivity using seven gases (i.e., CO, CO2, N2, O2, H2, NO, and NO2) demonstrated that MoS2:Co and MoS2:Ni are potential materials for disposable gas sensors for the capture and the detection of toxic NO and NO2.

environmental sciences,chemistry, multidisciplinary,nanoscience & nanotechnology
Effect of fluorine doping on the NO2-sensing properties of MoS2nanoflowers

Yixuan Huang,Donglin Li,Wenxiang Chai,Dingfeng Jin,Hongxiao Jin

DOI: https://doi.org/10.1088/1361-6528/acfaa7

IF: 3.5

2023-10-04

Nanotechnology

Abstract:The somewhat slow recovery kinetics of NO2sensing at low temperatures are still challenging to overcome. To enhance the gas sensing property, fluorine is doped to MoS2nanoflowers by facile hydrothermal method. Extensive characterization data demonstrate that F was effectively incorporated into the MoS2nanoflowers, and that the microstructure of the MoS2nanoflowers did not change upon F doping. The two MoS2doped with varying concentrations of fluorine were tested for their sensing property to NO2gas. Both of them show good repeatability and stability. A smaller recovery time was seen in the F-MoS2-1 sample with a little amount of F loading, which was three times quicker than that of pure MoS2. The key reason for the quicker recovery time of this material was found to be the fluorine ions that had been adsorbed on the surface of F-MoS2-1 would take up some of the NO2adsorption site. Additionally, the sample F-MoS2-2 with a higher F doping level demonstrated increased sensitivity. The F-MoS2-2 sensor's high sensitivity was mostly due to the lattice fluorine filled to the sulfur vacancy, which generated impurity levels and reduced the energy required for its electronic transition. This study might contribute to the development of new molybdenum sulfide based gas sensor.
N dopants triggered new active sites and fast charge transfer in MoS2 nanosheets for full Response-Recovery NO2 detection at room temperature

Ruozhen Wu,Juanyuan Hao,Shengliang Zheng,Quan Sun,Tingting Wang,Di Zhang,Hui Zhang,You Wang,Xin Zhou

DOI: https://doi.org/10.1016/j.apsusc.2021.151162

IF: 6.7

2022-01-01

Applied Surface Science

Abstract:The slow response and incomplete recovery are primary bottlenecks for the sensing performance of 2D transition-metal dichalcogenides (TMDs) at room temperature, which hinders their development for state-of-the-art gas sensors. Herein, we engineered N doped p-type MoS2 against its native n-type propensity to enable a rapid room-temperature response/recovery detection of NO2. Compared to pristine n-type MoS2 showing typical slow response and no recovery (1544 s/-), the prepared N-doped MoS2 sensor exhibits a fast response/recovery (22/109 s) toward 10 ppm NO2 at room temperature. In addition, the N dopants endow MoS2 with a sensing response of 28% to 10 ppm NO2, ppb-level of detection limit (125 ppb), excellent selectivity, good repeatability, and humidity resistance. We underline the fast response/recovery mechanism of N-doped MoS2 to be the N dopants triggered synergistic effect of new active sites and fast charge transfer based on density functional theory calculation and Hall-Effect measurement. We hope this result may shed a new light on the development of TMDs-based sensing materials aiming at improving their room-temperature response/recovery performance.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Synthesis and insights into the gas sensing mechanisms of N-doped MoS 2 hierarchical structures with superior gas sensing properties at room temperature

Mingli Yin,Kexin Wang,Chunxiao Gao,Rongrong Yang,Yan Huang,Lingmin Yu

DOI: https://doi.org/10.1016/j.materresbull.2024.112943

IF: 5.6

2024-06-11

Materials Research Bulletin

Abstract:An N-doped MoS 2 hierarchical structure with outstanding gas sensing performance has been successfully synthesized by a simple in situ atomic substitution technology for the detection of NO 2 . N doping significantly changes the electronic properties of the MoS 2 samples, reduces the charge transfer resistance and band gap. The responses of the 1.0 at% N-doped MoS 2 (N-MoS 2 -0.1) sensor to 50 and 100 ppm NO 2 at 25 °C are as high as 1603% and 1987%, respectively, which are respective 5.7 and 4.6 times that of the MoS 2 sensor. The sensor also possesses ppt-level theoretical detection limit (270 ppt), high selectivity, long-term stability. The possible gas sensing mechanisms have been discussed in detail. This study provides a feasible solution for the synthesis of N-doped 2D materials and demonstrates the enormous development potential in the field of room temperature gas sensors.

materials science, multidisciplinary
The sequential stimulation of uracil-rich and guanine-rich RNA species during cortisone induction of hepatic enzymes.

F. Yu,P. Feigelson

DOI: https://doi.org/10.1016/0006-291X(69)90374-X

1969-05-22

Abstract:
Preparation of MoS2 Nanospheres using a Hydrothermal Method and Their Application as Ammonia Gas Sensors Based on Delay Line Surface Acoustic Wave Devices

Chan-Yu Chung,Ying-Chung Chen,Feng-Renn Juang,Kuo-Sheng Kao,En-I Lee

DOI: https://doi.org/10.3390/ma16134703

IF: 3.4

2023-06-29

Materials

Abstract:An ammonia sensor based on a delay-line surface acoustic wave (SAW) device is developed in this study by coating the delay line area of the device with a nano-structured molybdenum disulfide (MoS2) sensitive material. A SAW device of 122 MHz was designed and fabricated with a pair of interdigital transducers (IDTs) defined on a 128° y-cut LiNbO3 substrate using photolithography technologies, and the aluminum IDT electrodes were deposited by a DC magnetron sputtering system. By adjusting the pH values of precursor solutions, molybdenum disulfide (MoS2) nanospheres were prepared with various structures using a hydrothermal method. Finally, an NH3 gas sensor with high sensitivity of 4878 Hz/ppm, operating at room temperature, was successfully obtained. The excellent sensitivity performance may be due to the efficient adsorption of NH3 gas molecules on the surfaces of the nanoflower-like MoS2, which has a larger specific surface area and provides more active sites, and results in a larger change in the resonant frequency of the device due to the mass loading effect.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Strategy and Future Prospects to Develop Room-Temperature-Recoverable NO2 Gas Sensor Based on Two-Dimensional Molybdenum Disulfide

Abhay V. Agrawal,Naveen Kumar,Mukesh Kumar

DOI: https://doi.org/10.1007/s40820-020-00558-3

2021-01-01

Abstract:Abstract Nitrogen dioxide (NO 2 ), a hazardous gas with acidic nature, is continuously being liberated in the atmosphere due to human activity. The NO 2 sensors based on traditional materials have limitations of high-temperature requirements, slow recovery, and performance degradation under harsh environmental conditions. These limitations of traditional materials are forcing the scientific community to discover future alternative NO 2 sensitive materials. Molybdenum disulfide (MoS 2 ) has emerged as a potential candidate for developing next-generation NO 2 gas sensors. MoS 2 has a large surface area for NO 2 molecules adsorption with controllable morphologies, facile integration with other materials and compatibility with internet of things (IoT) devices. The aim of this review is to provide a detailed overview of the fabrication of MoS 2 chemiresistance sensors in terms of devices (resistor and transistor), layer thickness, morphology control, defect tailoring, heterostructure, metal nanoparticle doping, and through light illumination. Moreover, the experimental and theoretical aspects used in designing MoS 2 -based NO 2 sensors are also discussed extensively. Finally, the review concludes the challenges and future perspectives to further enhance the gas-sensing performance of MoS 2 . Understanding and addressing these issues are expected to yield the development of highly reliable and industry standard chemiresistance NO 2 gas sensors for environmental monitoring.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Enhanced gas sensing performance and all-electrical room temperature operation enabled by a WSe2/MoS2 heterojunction

Sushovan Dhara,Himani Jawa,Sayantan Ghosh,Abin Varghese,Saurabh Lodha

DOI: https://doi.org/10.48550/arXiv.2009.11350

2020-09-23

Applied Physics

Abstract:Gas sensors built using two-dimensional (2D) MoS2 have conventionally relied on a change in field-effect-transistor (FET) channel resistance or a change in Schottky contact/pn homojunction barrier. This report demonstrates, for the first time, an NO2 gas sensor that leverages a gate tunable type II WSe2 (p)/MoS2 (n) heterojunction to realize a 4x enhancement in sensitivity, 8x lower limit of detection and improved dynamic response when compared to an MoS2 FET sensor on the same flake. Comprehensive sensing measurements over a range of analyte concentrations, gate biases and MoS2 flake thicknesses indicate a novel two-fold electrical response to NO2 exposure underlying the enhanced sensitivity of the heterojunction- (i) a series resistance change that leads to an exponential change in thermionic current at high bias, and, (ii) a carrier concentration change that leads to a linear change in interlayer recombination current near zero bias. The heterojunction diode also exhibits fast and tunable recovery under negative gate biasing. All-electrical (gate controlled) sensing and recovery operation at room temperature makes this a simple, low-overhead sensor. The ability to sense tri-nitro toluene (TNT) molecules down to a concentration of 80PPB highlights its potential as a comprehensive chemical sensing platform.
Facile Fabrication of MoS 2 Nanoflowers/SnO 2 Colloidal Quantum Dots Nanocomposite for Enhanced NO 2 Sensing at Room Temperature

Jingting Luo,Chong Li,Qutong Yang,Lanxin Yan,Baohui Zhang,Ran Tao,Sana Rauf,Honglang Li,Chen Fu

DOI: https://doi.org/10.1109/jsen.2022.3151068

IF: 4.3

2022-04-01

IEEE Sensors Journal

Abstract:With the continuous industrialization, as one of the most common air pollutants found in fossil fuels and automobile exhausts, nitride oxide (NO2) monitor is very essential for ensuring good air quality and our body health. 2D materials attract more attention for its special surface and electron structures. MoS2 shows small gas sensing response for its less surface dangling bonds. Here, we introduce a facile method to modify MoS2 with SnO2 as a NO2 receptor via mechanical composite. The MoS2 nanoflowers prepared with a hydrothermal method depicted a high surface/volume ratio and the SnO2 fabricated using a solvothermal method. Mixing ratio and annealing temperature was systematic researched for screening optimal parameters for gas sensor fabrication. The response was enhanced 1.5 time after modification with fast response and recovery time. The p-n heterostructure also provide good selectivity towards NO2 for gas sensing. This work provides a facile alternative for fast and stable response NO2 gas sensor at room temperature.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Highly sensitive NO2 response and abnormal P-N sensing transition with ultrathin Mo-doped SnS2 nanosheets

Jianhong Zhou,Ke Xue,Yaoda Liu,Tingting Liang,Pengfei Zhang,Xu Zhang,Wentao Zhang,Zhengfei Dai

DOI: https://doi.org/10.1016/j.cej.2020.127572

IF: 15.1

2021-09-01

Chemical Engineering Journal

Abstract:Sensing of Nitrogen dioxide (NO2) is of great importance for its pernicious and destructive impacts to both human health and nature environment. However, it still remains challenging to achieve the NO2 detection with fast response, high sensitivity and good selectivity. In this work, two-dimensional (2D) ultrathin n-type SnS2 nanosheets with Mo doping have been synthesized via a simple single-step solvothermal method and exploited for NO2 sensing application. Phase and structural analyses confirm the homogeneous cation alloying of Mo (1% ~ 10%) in the SnS2. It is indicated that the Mo doping can elegantly tune the electronic structure of SnS2 and promote the sensing process with negative adsorption energy. Especially for 3%Mo-SnS2 nanosheet, the NO2 sensing response at 150 ℃ has been enhanced around 23 times relative to the un-doped SnS2 sample, together with fast sensing kinetics and good NO2 selectivity. Interestingly, the n-type SnS2-based sensor shows an abnormal response characteristic for the first time with resistance decrease at low NO2 concentration, behaving like a p-type semiconductor. The P-N sensing transition can be regulated by varying the operation temperature and NO2 concentration. Mechanisms for the enhanced sensing and abnormal phenomena are well explained based on density function theory calculations. Such P-N sensing switch in a single sensor here opens up interesting possibilities for the highly sensitive and selective detection of NO2 with 2D metal dichalcogenides.

engineering, chemical, environmental
Performance Enhancement of Gas Sensing by Modification of Molybdenum Selenide Nanosheets with Metal Nanoparticles

Hanxiao Li,Yu Bai,Jiale Xue,Ruojun Xu,Min Zhang,GuoXiang Chen,shuai liu,Yinggang liu

DOI: https://doi.org/10.1088/1361-6528/ac53d7

IF: 3.5

2022-02-10

Nanotechnology

Abstract:Abstract In this paper, nanostructured Molybdenum Selenide (MoSe2) with composited phases are synthesized by hydrothermal method, and the products are modified by metal anoparticles to improve the gas sensing performance. Microstructure characterization shows that few layered 1T/2H-MoSe2 nanosheets have been successfully prepared. Both the morphology and composition of nanosheets could be tuned by the reaction parameters. It is shown the MoSe2-based nanomaterials have excellent selectivity to Nitrogen dioxide (NO2) according to gas sensing properties measurement. The sensitivity of 1T/2H-MoSe2 nanosheets modified by Cu nanoparticles is 17.73 (50 ppm NO2) at the optimal operating temperature, which is the highest compared with other samples. The sensors also exhibit rapid response/recovery time and high stability. The sensing mechanism of MoSe2 nanosheets toward NO2 is investigated based on the first-principles calculation. The results suggest the modification by metal nanoparticles could significantly improve the adsorption energy and the charge transfer between gas molecule and MoSe2. This work demonstrates a promising guidance for the design of new NO2 gas sensing materials and devices.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Highly sensitive and recoverable room-temperature NO<sub>2</sub> gas detection realized by 2D/0D MoS<sub>2</sub>/ZnS heterostructures with synergistic effects

Chao Liu,Xinwei Chen,Hanyu Luo,Bolong Li,Jia Shi,Chao Fan,Jianhua Yang,Min Zeng,Zhihua Zhou,Nantao Hu,Yanjie Su,Zhi Yang

DOI: https://doi.org/10.1016/j.snb.2021.130608

2021-01-01

Abstract:Two-dimensional (2D) transition metal dichalcogenides (TMDs) have received emerging attention due to their rich active sites, layered structure, and suitable electronic structure for gas sensing at room temperature (25 degrees C). However, the sensitivity, recoverability, stability and selectivity of TMDs-based gas sensors have remained a grand challenge. Herein, a novel 2D/0D molybdenum disulfide (MoS2)/zinc sulfide (ZnS) based gas sensor was rationally designed via a two-step solution process, enabling high-performance detection of nitrogen dioxide (NO2) gas at room temperature. Specifically, the MoS2/ZnS heterostructures manifest a greatly enhanced response performance (S = 7.2) to 5 ppm NO2 in comparison with the bare MoS2 nanosheets. The gas sensor can be completely recovered after re-exposing to the air for 4.6 min at room temperature without using any external auxiliary treatments. Our optimized gas sensor not only exhibits an ultra-low theoretical limit of detection (14 ppb), but also shows an ultrahigh selectivity and outstanding stability. We further showed that the greatly enhanced gas sensing performance of 2D/0D MoS2/ZnS can be ascribed to the unique structure as well as the synergistic effects between MoS2 nanosheets and ZnS nanoparticles from the geometrical, charge transfer, equivalent resistance, and chemical aspects. This work provides a promising approach to the fabrication of high-performance gas sensing materials for environmental monitoring at room temperature.
Highly responsive gas sensors based on grain boundary–rich polycrystalline few-layer MoS2 films for NO2 detection

Yue Ji,Shengyuan Li,Zhiyan Jia,Yi Wang,Jinyi Li

DOI: https://doi.org/10.1088/1402-4896/ad8a04

2024-10-23

Physica Scripta

Abstract:This study addresses the issues of insufficient sensitivity and poor reversibility for NO2 detection by successfully fabricating a sensor based on uniform and high-quality few-layer MoS2 polycrystalline material using chemical vapor deposition. This approach aims to improve the response of the sensor by exploiting the abundance of grain boundary (GB) defects in polycrystalline MoS2 membranes. Comprehensive surface morphology analysis of the few-layer MoS2 polycrystalline films was conducted using microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy to characterize their chemical composition and properties. Subsequently, evaluation of 1–100-ppm NO2 was conducted at room temperature (25°C). The results show excellent performance of the sensor, with a response range of 11–82.24. Notably, under ultraviolet excitation at room temperature, this sensor exhibits a response time of only 41 s to 50 ppm of NO2 with complete recovery and improved sensitivity, maintaining reliable stability over eight weeks. Furthermore, the findings reveal that the sensor demonstrates high selectivity toward NO2 gas with limit of detection and limit of qualification values of 10 and 34 ppb, respectively. Owing to the abundant adsorption sites provided by GB defects in polycrystalline thin films, the response performance of the sensor is effectively enhanced. This study provides valuable insights into the future design and development of high-performance NO2 gas sensors.

physics, multidisciplinary
Effect of a Ni-Substituted Cu-MOF Precursor toward Efficient NO 2 Gas Detection: A Comprehensive Comparative Gas-Sensing Study of MOF-Derived and Traditionally Synthesized CuO/NiO-Based Nanocomposites

Shital J. Sahoo,Adyasha Das,Banalata Maji,Uttam K. Goutam,Priyabrat Dash

DOI: https://doi.org/10.1021/acsaelm.4c00029

IF: 4.494

2024-03-28

ACS Applied Electronic Materials

Abstract:With the progression of research on gas sensors, numerous studies are being carried out on the tuning of metal–organic framework (MOF)-derived semiconductor metal oxides (SMOs) for gas-sensing studies in lieu of traditionally synthesized SMOs to attain the desired result at lower temperatures and enhance the sensor response. Still, no comparative gas-sensing study between traditionally synthesized SMOs and MOF-derived SMOs has been conducted to understand the reasons behind such a higher activity. To gain insights into the enhanced activity and find the reasons behind the improved sensor response, a comparative gas-sensing study was carried out using octahedral Cu-MOF as a template to fabricate an MOF-derived CuO/NiO (CuO/NiOM) heterostructure and traditionally synthesized CuO/NiO (CuO/NiOD) heterostructure via the combustion route. More importantly, our study revealed that the substitution of Ni2+ ions into the MOF template did not destroy the porous hierarchical framework of Cu-MOF either during the calcination process or when the Ni2+ ions were added into the precursor medium. A higher surface area (35 m2/g) and porosity obtained during the process would have provided sufficient permeability channels for the sorption of NO2 molecules, leading to the formation of the maximum concentration of active sites. Our results revealed that MOF-template-derived CuO/NiOM showed a comparatively higher response of S% = 13.9%, with response and recovery times of 18 and 29 s, respectively, at a temperature of 110 °C compared to traditionally synthesized CuO/NiOD. Further, to attain efficient room-temperature activity with a higher sensor response and lower response and recovery times, a p–n heterojunction was formed at their interface by modifying n-type thermally reduced graphene oxide (rGO) with CuO/NiOM. The rGO-CuO/NiOM gas sensor showed a p-type behavior with a comparatively higher response of 23.9% toward 60 ppm of NO2 at room temperature, with the lowest response and recovery times of 10 and 15 s, respectively. In addition, the sensor also possessed ultralow detection ability up to 5 ppm of NO2 with fast response and recovery.

materials science, multidisciplinary,engineering, electrical & electronic
2H-SnS2 assembled with petaloid 1T@2H-MoS2 nanosheet heterostructures for room temperature NO2 gas sensing

Shraddha Hambir,Shashikant Shinde,H M Pathan,Som Datta Kaushik,Chandra Sekhar Rout,Shweta Jagtap

DOI: https://doi.org/10.1039/d4ra03194f

2024-08-01

Abstract:In this study, we explored the gas-sensing capabilities of MoS2 petaloid nanosheets in the metallic 1T phase with the commonly investigated semiconducting 2H phase. By synthesizing SnS2 nanoparticles and MoS2 petaloid nanosheets through a hydrothermal method, we achieve notable sensing performance for NO2 gas at room temperature (27 °C). This investigation represents a novel study, and to the best of our knowledge no, prior similar investigations have been reported in the literature for 1T@2HMoS2/SnS2 heterostructures for room temperature NO2 gas sensing. The formed heterostructure between SnS2 nanoparticles and petaloid MoS2 nanosheets exhibits synergistic effects, offering highly active sites for NO2 gas adsorption, consequently enhancing sensor response. Our sensor demonstrated a remarkable sensing response (R a/R g = 7.49) towards 1 ppm of NO2, rapid response time of 54 s, baseline recovery in 345 s, good selectivity and long-term stability, underscoring its potential for practical gas-sensing applications.

Vaccination with DNA containing tat coding sequences and unmethylated CpG motifs protects cynomolgus monkeys upon infection with simian/human immunodeficiency virus (SHIV89.6P).

Comparative study on gas-sensing properties of amorphous MoS2 nanoparticles and crystalline MoS2 nanoflowers

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Design of Hetero-Nanostructures on MoS2 Nanosheets To Boost NO2 Room-Temperature Sensing

Modulation of Gas Adsorption and Magnetic Properties of Monolayer-MoS2 by Antisite Defect and Strain

SnO 2 Nanosheets for NIR-Enhanced NO 2 Sensing and Adsorption/Desorption

Functionalized Molybdenum Disulfide (MoS2) Monolayer as Efficient Nanosensor Towards Toxic Nitrogen Containing Gases

Effect of fluorine doping on the NO2-sensing properties of MoS2nanoflowers

N dopants triggered new active sites and fast charge transfer in MoS2 nanosheets for full Response-Recovery NO2 detection at room temperature

Synthesis and insights into the gas sensing mechanisms of N-doped MoS 2 hierarchical structures with superior gas sensing properties at room temperature

The sequential stimulation of uracil-rich and guanine-rich RNA species during cortisone induction of hepatic enzymes.

Preparation of MoS2 Nanospheres using a Hydrothermal Method and Their Application as Ammonia Gas Sensors Based on Delay Line Surface Acoustic Wave Devices

Strategy and Future Prospects to Develop Room-Temperature-Recoverable NO2 Gas Sensor Based on Two-Dimensional Molybdenum Disulfide

Enhanced gas sensing performance and all-electrical room temperature operation enabled by a WSe2/MoS2 heterojunction

Facile Fabrication of MoS 2 Nanoflowers/SnO 2 Colloidal Quantum Dots Nanocomposite for Enhanced NO 2 Sensing at Room Temperature

Highly sensitive NO2 response and abnormal P-N sensing transition with ultrathin Mo-doped SnS2 nanosheets

Performance Enhancement of Gas Sensing by Modification of Molybdenum Selenide Nanosheets with Metal Nanoparticles

Highly sensitive and recoverable room-temperature NO<sub>2</sub> gas detection realized by 2D/0D MoS<sub>2</sub>/ZnS heterostructures with synergistic effects

Highly responsive gas sensors based on grain boundary–rich polycrystalline few-layer MoS2 films for NO2 detection

Effect of a Ni-Substituted Cu-MOF Precursor toward Efficient NO 2 Gas Detection: A Comprehensive Comparative Gas-Sensing Study of MOF-Derived and Traditionally Synthesized CuO/NiO-Based Nanocomposites

2H-SnS2 assembled with petaloid 1T@2H-MoS2 nanosheet heterostructures for room temperature NO2 gas sensing