Abstract:Fabrication and Characterization of Hybrid Composites. Single fiber polymer composites containing either natural or artificial fibers may not deliver the desired characteristics. The current study used the hand‐layup technique to make a hybrid composite by incorporating the natural fiber, Cordia‐dichotoma (CD) and artificial fiber, carbon fibers (CF) in a polyester matrix and compressing the mixture for the desired size. The current study investigates the influence of carbon fiber loading (0, 5, 10, and 15 wt%) on the mechanical, structural, and crystalline properties of CD/polyester composites keeping the total fiber loading at 20 wt%. Mechanical properties are investigated with a universal testing machine, and impact strength using Izod impact apparatus. Better mechanical properties (tensile strength‐457.38 MPa; flexural strength‐290.09 MPa and impact strength‐346.46 J/m) were obtained for the pure carbon fiber composite arranged in four layers (CF/CF/CF/CF), followed by hybrid composite (CF/CD/CD/CF) (tensile strength‐319.24 MPa; flexural strength‐253.03 MPa and impact strength‐291.34 J/m) whereas pure CD fiber (CD/CD/CD/CD) composite yielded the lowest values (tensile strength‐117.96 MPa; flexural strength‐164.99 MPa and impact strength‐118.11 J/m). Composites undergo hybridization, which improves their mechanical properties, lowers their cost, and makes them more environmentally friendly. The characteristics of the specimens were examined using Fourier Transform Infrared Spectroscopy (FTIR), X‐ray Diffraction Analysis (XRD), Atomic Force Microscope (AFM), and Scanning Electron Microscopy (SEM). According to findings, crystallinity index is increased from 77.94% for CD/CD/CD/CD composite and increased to 78.21% for CF/CD/CD/CF composite. Highest crystallinity index of 82.46% was obtained for CF/CF/CF/CF composite. These hybrid composites may be used for applications involving medium loads. Highlights In this study, Cordia‐dichotoma natural fibers are extracted and treated with alkali (NaOH) to reduce the biodegradability. To lower the cost and enhance mechanical and biodegradable properties Carbon and cordia‐dichotoma fibers have been hybridized. Mechanical Properties such as tensile, flexural and impact properties are evaluated for the prepared hybrid composites. Hybrid composites were analyzed using FTIR, AFM, XRD, and SEM to assess their suitability to various applications.

Abdominal muscle strength in patients with tetraplegia.

Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites

Mechanical, morphological and wear resistance of natural fiber / glass fiber-based polymer composites

Wear and Frictional Performance of Epoxy Composites Reinforced with Natural Waste Fibers and Fillers for Engineering Applications

Mechanical Interlocking Approaches to the Prediction of Mechanical and Tribological Behavior of Natural Fiber-Reinforced Polymer Hybrid Nanocomposites or Automotive Applications

Bo-derived waste neem to enriching reinforced hybrid composite for environmental remediation

Impact of different parameters in tribological properties of enset ventricosum/ terminalia arjuna fibers /SiO 2 filler incorporation

Evaluation of mechanical and erosive wear properties of hybrid nano composites basalt/E-glass fiber + MWCNTs/SiO 2

Inactivated Quadrivalent Split-Virus Seasonal Influenza Vaccine (Fluarix® Quadrivalent): A Review of Its Use in the Prevention of Disease Caused by Influenza A and B

Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material

The effect of various composite and operating parameters in wear properties of epoxy-based natural fiber composites

Improvement of low-velocity impact and tribo-mechanical properties of unsymmetrical hybrid composites through addition of nanoclay

Effect of CNT-Based Resin Modification on the Mechanical Properties of Polymer Composites

Effect of bio nanofiller in influencing the carbon and E-glass fabric reinforced composites

Mechanical, tribological and modal characteristics of eco-friendly coir/sugarcane fillers reinforced polymer composites

Influence of silica and alumina nanoparticles on the wear and mechanical behavior of Indian almond fiber reinforced natural composites

Biodegradability and mechanical behavior of novel hybrid green composites fabricated with cashew shell particle, sisal fiber and corn starch resin

Enhancement of mechanical and structural characteristics through the hybridization of carbon fiber with Cordia‐dichotoma/polyester composite

Optimization and Prediction of Wear Characteristics of Khas Khas Grass/Mesquite Bark Powder/Banana Fiber-Reinforced Epoxy Green Hybrid Composites Using Taguchi Technique

Effect of silane treatment on corn husk and tamarind fiber and betel nut filler on fatigue, thermal conductivity, and machining behavior of epoxy biocomposites

Physical, mechanical and dry sliding wear properties of non-woven viscose fabric epoxy-based polymer composites: An optimization study