Abstract:This study deals with the Nb–niobium silicide-based composites developed by the hot-pressing of Nb–Si–Ti ternary powder mixtures with a fixed Ti addition (6at.%) and Si content ranging from hypereutectic (11at.%) to near-eutectic compositions (18at.%). The effects of Si content, Ti addition and strain rates on the sample microstructural characterization, flexural strength, fracture toughness, quasi-static compressive deformation and failure processes were investigated. It was revealed that the volume fraction of silicides increased with increasing Si content, and most of the Ti atoms dissolved into the niobium silicides to form (Nb,Ti)5Si3 solid solutions instead of binary titanium silicides. The experimental evidence showed that a moderate improvement in the flexural strength, fracture toughness and compressive yield stress of the composites was achieved by the addition of Ti. Higher Si additions produced a much more remarkable enhancement in the compressive yield stress and bulk hardness, whereas both the flexural strength and fracture toughness decreased with increasing Si content owing to the existence of residual porosities in the samples. The composites showed remarkable superiority to the arc-melted Nb–Si alloys and monolithic niobium silicides in fracture toughness (8.3–13.0MPam vs. 4.5MPam), where the toughening effect was attributed mainly to crack bridging and crack deflection by the remaining ductile Nb phase. Moreover, quasi-static uniaxial compression tests at strain rates between 10–5 and 10–3s−1 indicated that the deformation behavior and failure processes were significantly affected by Si content and strain rates. The strain-rate-hardening behavior for all the strain rates was observed in the composite materials and the strain-rate sensitivity decreased with increasing Si content. At a lower strain rate, the composite materials with a hypoeutectic Si composition failed with a pseudoplastic response and at an angle of ∼45° off the compressive loading direction. However, in the case of higher strain rate and Si content, the brittle failure in the samples occurred through vertical splitting and spalling of fragments.

Prediction of New Structure, Phase Transition, Mechanical, and Thermodynamic Properties of Nb3Si

Scanning the latent phases and superconductivity in the Nb-Pb system at high pressure

Characterization of A New Nb-Silicide (-Nb11si4) in Nb-Si Binary Systems

Mechanical and Thermodynamic Properties of the Monoclinic and Orthorhombic Phases of Sic2n4 under High Pressure from First Principles

The structural, mechanical and electronic properties of NbXSi (X=Fe, Co, Ni, Ru, Rh, Pd, Os, Ir and Pt) compounds from first-principles calculations

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

Analyses of Eutectoid Phase Transformations in Nb–Silicide In Situ Composites

Theoretical prediction of structural, elastic and thermodynamic properties of transition metal monosilicides CrSi, TiSi and ZrSi under high pressure

First-principles investigation of physical properties of transition metal-based ternary TM 5 Si 3 C (TM = Nb, Mo, Ta, W) silicides of nowotny phase

First-Principles Investigation of Elastic and Thermodynamic Properties of Sicn under Pressure

Phase transformation and mechanical stability of niobium aluminide (Nb3Al) induced by high pressures

Insight into structural, electronic, elastic and thermal properties of A15-type Nb3X (X = Si, Ge, Sn and Pb) compounds

First principles study of the structure and properties of Nb-Sn alloys under high pressure

Prediction of the Rb-Si compounds under high pressure

Microstructural and mechanical characterization of Nb-based in situ composites from Nb–Si–Ti ternary system

Theoretical predictions of the electronic, optical and thermodynamic properties of the C40-type TMSi2 (TM = V, Nb and Ta) disilicides

Experimental and theoretical confirmation of an orthorhombic phase transition in niobium at high pressure and temperature

Noval Si-C Compounds with High Thermal Conductivity under TPa in Planetary Interior

Phase equilibria of the Nb–Si-Gd ternary system at 1273 K

Predictions of structural stability, elastic anisotropy, and thermodynamic properties of TM 5 Si 3 C (TM = Cr, Mo, and W)

Structural, electronic properties and boron stability of (001) surface of Nb5Si3 intermetallic by first-principles calculations