Abstract:Measurement and Control, Ahead of Print. In this paper, controller tuning methods based on stability region centroid methods reported in the literature are used to design PI-PD controllers for unstable, integrating and resonant systems with time delay. By analyzing the stability boundary locus (SBL) for the PD controller, which is utilized in the inner loop of this structure, the controller parameters are obtained using three methods which are the Weighted Geometric Center (WGC), Centroid of Convex Stability Region (CCSR), and Stability Triangle Approach (STA). These techniques were applied analytically, step by step. For the closed loop transfer function obtained in the inner loop of the controlled system, these three methods were utilized to design the PI controller in the outer loop, individually. Unit step responses of the controlled system, using PI-PD gains determined by each method, have been obtained. Furthermore, a disturbance of a certain time and amplitude was added to the systems to test the disturbance rejection behavior and the robustness performance of the methods. Perturbed responses were obtained through changing the model parameters at a certain rate. Time domain performance metrics were analyzed to compare the responses. The simulations were evaluated using settling time, rise time, and percentage overshoot as the assessment criteria. As a result of this study, the effectiveness of three methods, namely WGC, CCSR, and STA, in controller design for unstable, integrating, and resonant time-delay systems has been demonstrated. In addition, a comparison of time domain performance metrics is presented for the nominal and perturbed systems. Based on these comparisons, it is concluded that the methods outperform each other only in some time response performance measures. The presented results showed the advantages of these methods over each other in terms of some performance criteria. The contribution of this study to the literature is the comparative analysis of these three analytical methods.

Performance analysis of IMC-PID controller on PCT-14 air pressure control system

Performance monitoring and assessment for PID controller

Performance assessment of PID controller based on two-layer structure

Performance assessment of PID controller with time-variant disturbance dynamics

A simulating study of pneumatic position servo system with PID control

Utrahigh Pressure Control Method Based on Fuzzy PID

On PID Controllers Based on Simulated Annealing Algorithm

The Research of PID and Bang-Bang Controllers Based on the Dspace

Expert-PID Synchronization Control of Thrust Hydraulic System

Collaborative Simulation and Integrated CMAC and PID Optimization and Control of an Aerial Work Platform

Research on PID Tuning Method of Magnetically Suspended Rotor System Based on IMC

A Comparative Analysis of SIMC-PID with Other Conventional Techniques for Automobile Vehicle Air Conditioning System Control

Research on Control Method of PMSM Based on CMAC Neural Network

Application of IMC-PID Controller in Hydraulic Automatic Position Control System of Mill

Performance Optimization of PID Controller Based on Parameters Estimation Using Meta-Heuristic Techniques: A Comparative Study

LQG Benchmark Based Performance Assessment of IMC-PID Temperature Control System

PID control system analysis and design

Design and Performance Analysis of Fuzzy-Pid Controller

Intelligent PID control of an industrial electro-hydraulic system

A comparative study on PI-PD controller design using stability region centroid methods for unstable, integrating and resonant systems with time delay

PID control system analysis, design, and technology