Abstract:Background: The screw-in effect is a tendency of a nickel-titanium (NiTi) rotary endodontic file to be pulled into the canal, which can result in a sudden increase in stress leading to instrument fracture, and over-instrumentation beyond the apex. To reduce screw-in force, repeated up-and-down movements are recommended to distribute flexural stress during instrumentation, especially in curved and constricted canals. However, there is no consensus on the optimal number of repetitions. Therefore, this study aimed to examine how repeated up-and-down movements at the working length affect torque/force generation, surface defects, and canal shaping ability of JIZAI and TruNatomy instruments. Methods: An original automated root canal instrumentation device was used to prepare canals and to record torque/force changes. The mesial roots of human mandibular molars with approximately 30˚ of canal curvature were selected through geometric matching using micro-computed tomography. The samples were divided into three groups according to the number of up-and-down movements at the working length (1, 3, and 6 times; n = 24 each) and subdivided according to the instruments: JIZAI (#13/0.04 taper, #25/0.04 taper, and #35/0.04 taper) or TruNatomy (#17/0.02 taper, #26/0.04 taper, and #36/0.03 tape) (n = 12 each). The design, surface defects, phase transformation temperatures, nickel-titanium ratios, torque, force, shaping ability, and surface deformation were evaluated. Data were analyzed with the Kruskal-Wallis and Dunn's tests (α = 0.05). Results: The instruments had different designs and phase transformation temperatures. The 3 and 6 up-and-down movements resulted in a smaller upward force compared to 1 movement (p < 0.05). TruNatomy generated significantly less maximum torque, force, and surface wear than JIZAI (p < 0.05). However, TruNatomy exhibited a larger canal deviation (p < 0.05). No statistical differences in shaping ability were detected between different up-and-down movements. Conclusions: Under laboratory conditions with JIZAI and TruNatomy, a single up-and-down movement at the working length increased the screw-in force of subsequent instruments in severely curved canals in the single-length instrumentation technique. A single up-and-down movement generated more surface defects on the file when using JIZAI. TruNatomy resulted in less stress generation during instrumentation, while JIZAI better maintained the curvature of root canals.

A new method to measure the mechanical properties of rotary endodontic Ni-Ti files: Measurement of 6-axis force/torque and automatic root canal preparation

Numerical analysis of WaveOne Gold and 2Shape endodontic files during root canal treatment

Comparative Study of Torsional and Bending Properties for Six Models of Nickel-Titanium Root Canal Instruments with Different Cross-Sections.

Comparative evaluation of pediatric endodontic rotary file systems to bending and torsion tests: A finite element analysis

Comprehensive Assessment of Cyclic Fatigue Strength in Five Multiple-File Nickel–Titanium Endodontic Systems

Effect of repetitive up-and-down movements on torque/force generation, surface defects and shaping ability of nickel-titanium rotary instruments: an ex vivo study

Multidimensional Analysis of Curved Root Canal Preparation Using Continuous or Reciprocating Nickel-titanium Instruments

In Vitro Analysis of the Fatigue Resistance of Four Single File Canal Preparation Instruments

Effect of preset torque setting on torque/force generation, shaping ability and surface changes of nickel titanium rotary instrument in different root canal curvature locations: An ex vivo study

Impact of Helix and Taper on Structural Characteristics of a Nickel-Titanium Endodontic Instrument Through Finite Element Analysis

Assessment of Vertical Force Generated with Single File Systems during Shaping of Constricted Root Canals

Comparative Evaluation of Stress Distribution Against the Root Canal Wall at Three Different Levels by Using TruNatomy, XP-endo Shaper, F360, and 2Shape Files-A Finite Element Analysis

A new method for the assessment of the surface topography of NiTi rotary instruments

Shaping ability of ProTaper Gold and WaveOne Gold nickel-titanium rotary instruments in simulated S-shaped root canals

Evaluation of apical extrusion of debris and centering ability in different nickel-titanium files during curved root canal preparation

Nickel-Titanium Rotary Instruments: An In Vitro Comparison (Torsional Resistance of Two Heat-treated Reciprocating Files)

In Vitro Research Methods Used to Evaluate Shaping Ability of Rotary Endodontic Files-A Literature Review

A Mathematical Model For Describing The Mechanical Behaviour Of Root Canal Instruments

Comparative study of torsional and bending stress in NiTi, graphene, and GUM metal endodontic files by finite element analysis

Dynamic analysis of a NiTi rotary file by using finite element analysis: Effect of cross‐section and pitch length

Evaluation of design, mechanical properties, and torque/force generation of heat-treated NiTi glide path instruments