Abstract:Metallic biomaterials, such as stainless steels, cobalt–chromium–molybdenum (Co–Cr–Mo) alloys, and titanium (Ti) alloys, have long been used as load-bearing implant materials due to their metallic mechanical strength, corrosion resistance, and biocompatibility. However, their magnetic susceptibility and elastic modulus of more than 100 GPa significantly restrict their therapeutic applicability. In this study, spinodal Zr 60 Nb 40 , Zr 50 Nb 50 , and Zr 40 Nb 60 (at.%) alloys were selected from the miscibility gap based on the Zr–Nb binary phase diagram and prepared by casting, cold rolling, and aging. Their microstructure, mechanical properties, corrosion resistance, magnetic susceptibility, and biocompatibility were systematically evaluated. Spinodal decomposition to alternating nanoscale Zr-rich β 1 and Nb-rich β 2 phases occurred in the cold-rolled Zr–Nb alloys during aging treatment at 650°C. In addition, a minor amount of α phase was precipitated in Zr 60 Nb 40 due to the thermodynamic instability of the Zr-rich β1 phase. Spinodal decomposition significantly improved the mechanical strength of the alloys due to nanosized dual-cubic reinforcement. The Zr–Nb alloys showed an electrochemical corrosion rate of 94-262 nm per year in Hanks' solution because of formation of dense passive films composed of ZrO 2 and Nb 2 O 5 during the polarization process. The magnetic susceptibilities of the Zr–Nb alloys were significantly lower than those of commercial Co–Cr–Mo and Ti alloys. The cell viability of the Zr–Nb alloys was more than 98% toward MC3T3-E1 cells. Overall, the spinodal Zr–Nb alloys have enormous potential as bone-implant materials due to their outstanding overall mechanical properties, extraordinary corrosion resistance, low magnetic susceptibility, and sufficient bicompatibility. Statement of significance This work reports on spinodal Zr–Nb alloys with heterostructure. Spinodal decomposition significantly improved their mechanical strength due to the nanosized dual-cubic reinforcement. The Zr–Nb alloys showed large corrosion resistance in Hanks' solution because of formation of dense passivation films composed of ZrO 2 and Nb 2 O 5 during the polarization process. The magnetic susceptibilities of the Zr–Nb alloys were significantly lower than those of commercial Co–Cr–Mo and Ti alloys. The cell viability of the Zr–Nb alloys was more than 98% toward MC3T3-E1 cells. The results demonstrate that spinodal Zr–Nb alloys have enormous potential as bone-implant materials due to their outstanding overall mechanical properties, high corrosion resistance, low magnetic susceptibility, and sufficient biocompatibility.

Corrosion behavior of Zr-14Nb-5Ta-1Mo alloy in simulated body fluid

Bio-Corrosion Behaviors and Bio-Compatibilities of Tinbzrta and Tinbzrtamo High Entropy Alloys

Novel MRI-compatible Zr–Mo–Nb alloys with superior mechanical performance, high corrosion resistance and good cytocompatibility for biomedical applications

Corrosion behavior of new ternary zirconium alloys as alternative materials for biomedical applications

Novel Biocompatible Zr-Based Alloy with Low Young’s Modulus and Magnetic Susceptibility for Biomedical Implants

Nb-60Ta-2Zr alloy exposed to simulated physiological medium: Metallic-ion release behaviour and its correlation with electrochemical properties

Ti–Mo–Zr alloys for bone repair: mechanical properties, corrosion resistance, and biological performance

Microstructure, Mechanical Property, Corrosion Behavior, and in Vitro Biocompatibility of Zr-Mo Alloys

A Comparative in Vitro Study on Biomedical Zr–2.5X (X = Nb, Sn) Alloys

Effects of Zirconium on mechanical and electrochemical properties of Ti-15mo alloy for biomedical applications

Corrosion resistance and cytocompatibility of Ti–19Zr–11Nb–4Ta shape memory alloy for biomedical applications

A study of mechanical and magnetic properties in a metastable Zr–10Nb–6Sn alloy for MRI-compatible hard tissue replacements

Spinodal Zr–Nb alloys with ultrahigh elastic admissible strain and low magnetic susceptibility for orthopedic applications

Investigation of Microstructure and Corrosion of TiNbTaZrMo High-Entropy Alloy in the Simulated Body Fluid

Electrochemical and biological characterization of Ti–Nb–Zr–Si alloy for orthopedic applications

Corrosion resistance and in vitro response of a novel Ti35Nb2Ta3Zr alloy with a low Young's modulus

Screening on Binary Zr-1x (X = Ti, Nb, Mo, Cu, Au, Pd, Ag, Ru, Hf and Bi) Alloys with Good in Vitro Cytocompatibility and Magnetic Resonance Imaging Compatibility

Bio-tribological Characteristics of 3D-Printed Ti–Ta–Nb–Mo–Zr High Entropy Alloy in Human Body Emulating Biofluids for Implant Applications

Electrochemical Study and Mechanical Properties of Ti-Zr Alloy for Biomedical Applications

Corrosion fatigue behavior of MRI-compatible Nb-60Ta-2Zr alloy in exposure to simulated physiological solution

Microstructure, corrosion behavior and cytotoxicity of Zr–Nb alloys for biomedical application